Live webcam updater screwed to the top of my Acer W4 (brightness controls and screen Metro broke)

Similar Questions

• Live webcam Updater does not work... BIOS may not be updated...

  That's what I say in the title... Live webcam Updater recount not updated (even if there is an update of the BIOS on the support site).

  And, in a related note, the update of the BIOS (for my V5 - 122P) is the version 2.08. When I try to install it, it says I have to install first version 2.06.

  Version 2.06 is NOT on the Web site. How am I supposed to install it without the previous version?

  I just bought this laptop yesterday. Certainly he not did not support already?

  Hello...

  Live webcam updater does not update the frimware BIOS, you will need to download and install it directly.

  V 2.06 both V2.08 for model V5 - 122P are listed on the Acer website for the suport.

  The site displays only the most recent drivers.
  You need to change the option tab 'All' because 'later' is selected by default.

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.06_A_A.zip?acerid=635086150518678706&S...

  The above link has BIOS V2.06

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.08_A_A.zip?acerid=635112704441155009&S...

  The above link has BIOS V2.08

  Concerning

  Sharanji

• What can I do when I'm there on the permissions in the top bar I get yahoo search results and not Authorization Manager.

  I'm putting my authorization manager info, but when I put on the permissions in the top box I have yahoo results research and authorization manager is not started. How can I get another way to authorization manager? Or how to get the address bar to work as it should? I look forward to a response.

  Enter Subject: authorizations in the URL/address bar. (Requires the colon and no space)

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white.

  NETWORK CONNECTIONS

  Can anyone help? My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white, nothing at all, no icons, nothing.        Sincerely, Merlin

  Can you do a system restore at the time where it did not work properly? http://www.officeforlawyers.com/tips/sysrestore.html

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

  How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

  OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

  That solved my problem!

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards

• The drive on my Acer Z5610 is overheating and stop. How can I transfer my Windows 7 on new HARD drive

  Would appreciate help from the members of the Forum.

  The drive on my Acer Z5610 is overheating and stop unexpectedly. I bought a new 1 TB WD HARD drive. I tried loading the Acer recovery CD 3 I initially created in order to load all applications touch etc, but received a message to say that I got at loading Windows. The computer came pre loaded with Windows 7 Home Premium, so I did not all Windows disks. My question is: How can I transfer Windows 7 on my new HARD drive so I can begin to rebuild the PC?

  Hello

  I think that you have created the driver & application backup, if this is the case & * if the old HDD is still detected & boots you could create a factroy restore discs, if not then you might even get to store.acer.com.

• Ask Windows Update to install the Vista SP2, which was installed years ago and won't let me install Live Essentials for the same reason.

  Windows Update is now always ask to install the Vista SP2, which was installed years ago. When you try to install through Windows Update, it concludes the installation like ok, then once again it shows in Windows Update. When I try via stand-alone, it is said that SP1 is not installed. Of course, it is. In any case tried to reinstall and he wrote is already installed. I'm sure I installed both SPS long ago, but none of them show in the updates installed. It's probably something in the registry. Properties system shows SP1. Ah, I use Vista Home Premium 32-bit.

  Hello

  Thank you for your response.

  -What program did you use to increase performance?

  I suggest you please uninstall service pack 1, and then install both service packs.

  Method 1: Please follow the steps described in the article, and check if that helps.

  Note: I would recommend the first backup your information and other files External drive and perform operations.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  Method 2: Installation of Service pack 1 and service pack 2.

  Windows Vista Service Pack 1 all language standalone (KB936330)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=910

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2 - stand-alone version ALL languages (KB948465)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15278

  For more information, please visit the links:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know if it helps!

• I left my computer, but the lid down, and when I came back, my screen properties were screwed to the top

  My computer was working fine. Then I went somewhere, but I left my laptop, but the lid closed, and when I came back, the properties of the screen are all seeds. The wallpaper was very large, and any Web site I try to open is also very important.

  Hello

  Try rebooting to see if that helps.

  Use the system restore to a point before that happened.

  Start - Control Panel - restore and backup center - upper left repair Windows

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  --------------------------------------------

  Also, check to see if they apply:

  Right click on desktop - customize - display settings - Set resolution.

  Right click on desktop - customize - top left adjust font size (DPI)

  CTRL + mouse wheel works ZOOM

  CTRL + and CTRL - work ZOOM in and out

  Your mouse/touchpad probably incorporates a ZOOM to it.

  Your system also has a magnifier built in which could be a problem - it can be as often
  programmed to work on the mouse/keyboards.

  How to turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  To see if your mouse/touchpad is set to ZOOM or enlarge use Control Panel - mouse.

  The TouchPad (if you have one) probably also has Hotkey controls so check with the system manufacturer
  Support, online documentation and their forums, where appropriate.

  ==================================================

  Are you logged on as ADMINISTRATOR?

  Right click on desktop - customize - top left adjust font size (DPI)

  How to change the font size in Windows Vista
  http://www.vista4beginners.com/how-to-change-font-size

  ============================

  Start - type in the search-> REGEDIT search at the top of list - click box right on - RUN AS ADMIN

  HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics

  In the right pane, change AppliedDPI (double-click on it) of 78 who is from 120 to 60, which is (96)

  I hope this helps.

• Replace the top cover of Acer Aspire E5 - 571P_0866_V1.01

  I would like to replace the top cover of my Acer Aspire E5 - 571P and I am currently looking at this point on ebay.

  http://www.eBay.com/ITM/genuine-Acer-Aspire-E5-571P-us-keyboard-w-palmrest-touchpad-AP154000900-/391...

  They say so in their description, "Does NOT include the power button" (unlike the image?). I have to buy a separate switch then? Or I could recover my current top cover power button and paste it on that one?

  I have no experience with the replacement of the parts of computer so if you have any advice or pointers for me please share with me!

  Thank you in advance.

  The power Board is replaceable (a screws) so if your is ok, you can put it on the new cover.

  See PM.

• Print the URL at the top / bottom of page is too small and half out of the page

  I put it to print the URL and the title at the top of the page and the Date at the bottom of the page. He tries to do, but the impression is verrry small and 1/2 off the page.

  Works very well with Google Chrome.

  New printer WF 2540, test page is good.
  Mac 10 X

  Thanks for your help!

  Peter

  The font size of header and footer is still low. Last time I looked, I couldn't find a way to replace the default size of 10 others to choose a font that is intrinsically superior to Times New Roman as your default serif font. See: can I possibly enlarge the headers and footers in the "Page layout" menu of Firefox to make bigger it so I can see it better... or is this something I won't have to deal with being so SMALL. I don't check for a complementary solution; You can try looking for one on the Addons site.

  As the position on the page, some printers don't allow you to get all the way at the edge of the sheet. If that's the problem, you might be able to fix in the General settings of your system for your printer dialog box. I don't see a way to access of the Mac print dialog (Firefox print dialog screenshots in this article: How to print webpages in Firefox), so that you may find in Control Panel.

  If this does not work, there are certain preferences that Firefox stores with names similar to the following. In these environments, 25 = 1/4 inch (the value is divided by 100).

  • Print.printer_BrandX.print_unwriteable_margin_top
  • Print.printer_BrandX.print_edge_top

  To modify these, you can use the subject: configuration preferences editor. In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful. Then use some of the more unique terms (for example, unwrit or edge) to filter the list.

• Firefox 8.0.1 - right click of the mouse does not work and the menus at the top are not working. They sparkle and sometimes remain visible, but most of the time they cannot be seen.

  When I right click of the mouse on a link of the menu sparkles and especially is not visible. When I select the top menu bar, the menu selections twinkle and especially are not visible. It makes the browser unusable. This is a serious bug.

  Bookmark and menus flicker- https://support.mozilla.com/questions/850203

• Scrolling Parallax of the top (bird's-eye view) view / resizing and virgins of the tasks

  Hello :)

  I thought this was going to be easy, but some problems

  Currently Im trying to do a parallax road scroll while seeing at the top, but there are some current issues.

  the 1st is that somehow after the second image out of the scene, there are a few white pixels that do not... and it seems that the speed of movement is == to the pixels that are not filled.

  And I think, just suppose that if I test it on as different sizes - screen it's a phone - ill get a few problems with the scaleX and Y and it will get enough ugly and cubes.

  I did ch by a tutorial or an example but there are only in the X direction as if you see a side view of the car like this

  134 http://Hub.tutsplus.com/tutorials/Add-Depth-to-Your-Game-with-Parallax-scrolling--active-2

  If the file SWF here

  http://www.stouchgames.com/APKs/road.swf

  Therefore, the current code that I have

  package  {
  
            import flash.display.MovieClip;
            import flash.events.Event;
  
  
            public class MainClass_road extends MovieClip {
  
                      protected var _road:road = new road();
                      protected var _road2:road2 = new road2();
  
  
                      public function MainClass_road() {
  
                                _road.x = stage.stageWidth/2
                                _road.y = stage.stageHeight - _road.height
                                addChild(_road)
                                _road2.x = stage.stageWidth/2
                                _road2.y = y - _road2.height
                                _road2.alpha = 1
                                addChild(_road2)
                                addEventListener(Event.ENTER_FRAME, everyFrame)
                      }
  
                      protected function everyFrame(ev:Event):void{
                                _road.y +=8
  
  
                                if(_road.y > 400){
                                          trace("zzzz")
                                          _road.y = y - _road2.height 
                                }
                                moveBackground2()
  
                      }
                      protected function moveBackground2(){
                                _road2.y +=8
                                if(_road2.y > 400){
                                          _road2.y = y - _road2.height
                                }
                      }
  
  
  
            }
  
  }
  
  

  and the FLA is here

  http://www.stouchgames.com/APKs/road.fla

  This is not going to work.  If you change the position of part of the route of the road there will be out of the scene, revealing part of the scene.

  to give the appearance of infinite scrolling, roads must have a height, at least, twice the stageHeight.  If you do not plan to use the infinite scrolling and want to only reach a maximum of 10 px then the roads must be 10 px heigher than the stadium.

• How do I get the name of a duplicated or created control and add a reminder

  Hi all

  According to the number of entry points I need, I duplicate a digital or an input string to the DuplicateCtrl function. My question is, how do I get the name and id of the control that has been created, and how can I assign a callback to it? Alternatively, it would be better to create a fresh ctrl instead of duplicate?

  Thanks in advance!

  Hi TurboMetrologist,

  Why are you trying to get the name of constant control? Remember that you cannot use this name to address control; control names are in fact simply the macros in the file associated with the UIR, include in other words, the preprocessed compiler code and everywhere where the names of PANEL_CONTROL replaces the digital value as parameters to functions (and therefore 'control' parameter is an int value and not a char *)

  That's why NewCtrl () or DuplicateCtrl () functions return a control ID: this is the handle to the new object, the only way to handle it. You will need to store this handle in a nonvolatile memory so that you can access durng life program.

  In addition, there are other ways to assign a meaning to a control to pass on the name of constant control. For example, you can use the callbackData parameter to differentiate the different copies of a control.

  Let me explain with an example. You said that you need several entries (dynamically created that you don't know in advance how many of them use); a solution could be:

  • Design a master copy of a control in the IUR Editor, where it is easy to customize; also assign a callback function, if it must be common to all copies of the control
  • Assign a value to this control callbackData, programmatically for example SetCtrlAttribute (...,..., ATTR_CALLBACK_DATA, (void *) 1);
  • Duplicate the control, and then assign a different callbackData
    for (i = 2; I have< 5;="" i++)="">
    handle = DuplicateCtrl (...);
    SetCtrlAttribute (..., handle, ATTR_CALLBACK_DATA, (void *) I);
    }

  By operating this way, whenever the reminder of control is triggered by any control, it will receive the callbackData assigned, and you will be able to differentiate your code with a simple switch:

  switch (callbackData (int)) {}

  case 1: / / the master controls

  break;

  case 2: / / first dual control

  break;

  }