[Living corners] ALT-click and double-click don't work

Similar Questions

• I spilled juice on my keyboard and some keys don't work, how can I make it work? :/

  I need help, I spelt juice on my keyboard and some keys do not work. How can I solve this problem? I tried to remove one of the main, but it has messed up it more, I NEED HELP. Please, I beg you! Tell me a solution how to fix this please!

  Replace the keyboard.

• AND and NAND gate don't work well when used with 74LS193N

  When I use AND or NAND to work with 74LS193N, that it has not produced the result that I expected. Please see my download folder. I use AND and NAND gate to switch my FF JK when my 74LS193N give a 1001 signal but my FF JK switch before that when my 74LS193N produce a 1000 signal then it then it switches again when the 47LS193N product 1001. According to my observation he just to produce the signal in a very short time, this signal is able to pass through the NAND and AND farm at triggle my JK FF. I know this sholdn can't be happen. I thought that the signal that I spend when both inputs are high, I tried and NAND with any other logic gates so far its fine, so I don't have this problem hope someone can help me. For this reason all my work unable to design, it bothers me a lot...  Help!

  I guess I'm confused as to why you would use a generic part instead of parts 74LS00/08.  What you see are the differences in sync settings.   If you double-click on the door AND generic and press to edit the template, you will see the rise and fall of delay is 1nS.  If you place a 74LS08D and do the same thing, the delay of climb is 15nS and fall time is 20nS.   More likely, there is a setting of high spice for the counter where the QD line passes for a very small amount of time while the QA, QB, and lines QC transition from high to low.  The real AND doors NAND can't see this transition delays inherent in the real part spread (rise and fall).  If you change the values of the generic parts to that of the actual element values, the circuit should work.

• Device right out of windows and sliding bottom don't work in all applications. In the pictures folder slide bar does not remain in the position. It slides up. How can I fix it?

  The cursor does not work in all applications.  I was allowed in word documents.  When I click on the connection box, I don't get the drop down with choices; the choice will Flash and then disappear.  A spreadsheet in Google docs, does not work with the cursor.  the window opens to the right and if I drag the slide to the left, it slides back just before I can select one cell.

  I tried to empty the caches and history (successfully, I think).  I use Mozilla and Safari.  Gmail was my first instance of the problem with th elog-in box.  Now, the problem seems to be spreading.

  Hi Kenypat,

  A. - what happens with internet explore?

  B. what applications like Excel, Notepad, etc.?

  You try to run a scan for viruses on your computer and check if the problem persists.

  http://www.Microsoft.com/security_essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If the problem is with other browsers, you will need to communicate with them in that regard.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Shortcuts and other features don't work anymore

  A week ago my Photoshop CC 2015 began to malfunction. Shortcuts like ALT + scroll wheel to zoom or space to move no longer works. Also the selection rectangle and popups to tool (if you hold the left click on the toolbar on the left to the pop-up window of the other tools) no longer work.

  I use 10 64-bit Windows, and I tried to reinstall Photoshop on the cloud. I deleted the folder 'C:\Users\USER\AppData\Roaming\Adobe\Adobe Photoshop CC 2015' before you reinstall it to ensure that all settings have been deleted. Unfortunately the problem persists.

  Y at - it a fix for this problem?

  I discovered what caused problems. There was a bug in a program called synergy which collided with the way Adobe screen sharing handles entries. After the update to the latest nightly build of synergy, everything worked again.

• Bank of Scotland pages have lost the scroll bar and Page Down don't work either. they say it's a problem with Mozilla! So, how to navigate to the bottom of

  The Bank said it isn't a problem with their Web site, but with the browser. There is no way to access the bottom of the page, so you can not pay the invoice online because you cannot access the button pay.

  You may have switched to the keyboard navigation.

  • http://KB.mozillazine.org/accessibility.browsewithcaret

  You can activate or switch by pressing F7 keyboard navigation (Mac: fn + F7).

  • Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Shift + Ctrl + T doesn't work anymore. I tried uninstalling and reinstalling and it still don't work. I can't find the other answers.

  Today, I noticed that open a closed tab previously not working anymore. This feature is crucial for my work. I tried to uninstall Firefox and reinstall and it did not help. Under history, recently closed recently closed tabs, windows and are grey. I have my story to remember settings.

  I don't know what the problem is and I need to my Shift + Ctrl + T return.

  Your list of details of the system shows that you have defined two preferences that control the restoration of closed tabs and windows are set to 0:

  • Browser.sessionstore.max_tabs_undo: 0
  • Browser.sessionstore.max_windows_undo: 0

  You can reset all browser.sessionstore. * prefs that appear "BOLD" (user set) to the default via the context menu.

  You can check if you have a user.js file in the Firefox profile folder that sets the prefs as pref browser.sessionstore.resume_session_once true.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  Note that your list of details of the system shows that you have a user.js file in the profile folder to initialize some preferences at each start of Firefox.

  The user.js file appears only if you or another software created, therefore, normally, he wouldn't be here.
  You can check its contents with a text editor if you do not create this file yourself.

  The user.js file is read whenever you launch Firefox and initializes the preferences to the value specified in this file, so set of preferences via user.js can be changed temporarily for the current session.

  • http://KB.mozillazine.org/Preferences_not_saved

• versions of Firefox 26,27 and 28 is don't work on win7 32 bit

  I changed my computer win xp sp3 for win 7 (I have 32 bit os). I have found that versions... 26, 27... and 28 are incomtable with this os. 25 version is ok. What updates and how to maintain them.

  Please try to reset Firefox in safe mode Refresh Firefox – reset the parameters and modules

• After updating, my forward and back arrows don't work, as well as web addresses are not displayed on the address bar

  I am on Windows 7 eternity / I've updated to Firefox 6, since then I couldn't use the front and rear, that it is not not a page Web address appears on the bar, these two problems are on the navigation bar, and both worked fine before the update. I've since updated to Firefox 6.0.2, but problems remain. It's very frustrating, I tried to find an answer to this, but nothing helped. I tried uninstalling and reinstalling, but no change, I tried to go back to an earlier version, but no change, right now with Firefox 6.0.2 but no change. I also have a computer with Windows XP, with the same version of Firefox, but it works OK

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• On my desk top and down arrows don't work, they don't work when plugged into my laptop.

  I uninstalled Firefox, deleted the folder of Win XP and personalized re-installed (request for information may not be transferred). To my surprise, my favorites were not gone. . Nor had the problem. The up & down arrows will work on Internet Explorer (which I use rarely).
  How can I remove totally Firefox before a clean reinstall as a first step to solve the problem?

  Try to hit F7 and see if it changes the action of these arrows.

  http://KB.mozillazine.org/accessibility.browsewithcaret

• Satellite A505 - ECO and button mute don't work

  Good evening everyone,

  Forgive me, but I'm new to this forum.
  The ECO utility and mute didn't seem to work on my laptop. When I press the button mute I hear a beep but i still get sound and when I press the eco button nothing happens.

  However, the volume keys Up and Down works play/pause and skip buttons work fine when I'm listening music.

  Any suggestions would be greatly appreciated, I love this laptop. Was my first, so you can understand why I'm having these issues and cannot remedy. But I think it is happening, finally, I did an update, do not know if this is what caused it.

  Again any help in this matter would be greatly appreciated...

  Hello

  Seems a (possibly windows) updates confusing the registry and this could be the reason for this
  Usually the VAP (value added package) control buttons.

  This is why I would recommend that a proposal of solution; Reinstall the VAP.
  Visit the page of the Toshiba driver and download the good PPV for your notebook from the series.
  Remove the old, reboot the device and reinstall the VAP.

• Pavilion g6-1245CE: drivers PCI and Realtek WiFi don't work after upgrading Win10

  Hi people,

  After updating the OS to Win7 x 64 to x 64 on a HP Pavilion G6 1245CE Win10, I have some difficulties with some hardware drivers. Most of the problems I could solve myself, but there are four material elements that continue to give errors, which I failed to solve by myself. These hardware problems also affect the ability to use internet (at least on WiFi) have this laptop, it is quite a big deal. I hope you can help me. I probably provide too much information below, but I think that at least the necessary information you need are there. I hope at least

  So can you help me solve the errors established below, so that I can at least use internet via WiFi again on this laptop?

  In Device Manager, I get the following errors and the info that seems worth sharing:

  Network cards--> Realtek PCIe FE Family Controller

  general tab:

  Device type: network adapters

  Manufacturer: Realtek

  Location: Bus 2 PCI, device 0, function 0

  State of the device: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  An object ID was not found in the file

  Events tab:

  Hello:

  Unfortunately, you will not get the Realtek RTL8188CE 802.11b/g/n WiFi Adapter to work on the Windows or Windows 10 8.1, so I can't help you with that.

  You can try the W10 drivers directly from the Realtek site for the ethernet controller and card reader.

  Ethernet controller... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader (PCI device)... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Because the wireless cannot work on W10, you may want to roll back to W7 in the 30 day period.

• I do not know my windows live password and security issues don't work I can't change the sent to my email address?

  I got a Xbox live account for my brother, but security issues and password do not work

  Hello

  What operating system is installed on the computer?

  You should contact the Support technique Xbox for assistance.
  http://support.Xbox.com/en-us/

  Hope this information helps.

• The input microphone and WEBCAM microphone don't work

  Hey.

  I'm on HP Pavilion dv6 1330-er.

  The problem is - my microphone and webcam microphone worked fine until this morning from yesterday. The night before I was talking with my friend on Skype and then went to sleep. When I woke up - input mic webcam and mic were not working.

  I use Windows 7 Ultimate x 64

  Nothing like this has happened before.

  Video webcam itself works very well. Headset works fine.
  Tried to reinstall the driver - didn't work.

  Laptop resting on the table, just as I left it in the evening

  Have 2 different windows installed on my laptop (the other is windows XP, not a single program installed, a few drivers) - microphones do not work.

  The microphone even on different PC works fine.
  The system detects the headset microphone and webcam microphone and the system shows when I take micro helmet inside and out.

  I have no idea what's wrong with audio input. Maybe you guys can help, thank you.

  Hi again toxyyy,

  Thanks for the quick response!

  According to the information provided in your post, I advise you to follow this document on the use of the Recovery Manager to restore the software and drivers (Windows 7). This should restore the drivers software and hardware of origin provided with your computer. Once the software installation is complete, please follow this document on using the HP Support Assistant to update your system drivers.

  For the component XP from your computer, I recommend later in this document on the no sound (Windows 98, ME and XP). This should help to restore the sound on the side of the XP for your operating system.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning