AND and NAND gate don't work well when used with 74LS193N

Similar Questions

• Satellite M30-113 does not work well when I use FreeBSD 6.2

  Hello

  My M30-113 does not work well when I use FreeBSD 6, 2-RELEASE http://www.FreeBSD.Org/

  I was told that Toshiba has release a new bios to correct the problem of cooling, because it does not allow me to fan passive cooling in FreeBSD.

  So could we have a new bios to solve this issue?

  Arabian salvation

  I am sure that mobile industry is focused on Windows operating system and hardware architecture together and preinstalled software are adapted and also configured to run well and stable.

  This operating system is supported and if something should be better portable manufacturers offer different updates to the BIOS. Of course, you can preinstall what you want but you can not expect support for everything you can find on the market and because of this I n t believe that you won't find any update especially for FreeBSD 6.2 - RELEASE BIOS.

• CP8 Interactions and slides with audio and closed captions - doesn't work well - please help

  Well, I use cp8 on a 64-bit windows computer 8. I placed an interaction on a slide. I have also audio on this slide and closed captioning.

  When I get to the slide, the audio is not because the mere fact that the interaction is there made the slide one break to enter. The student should I click play on the Player bar to go, but which is not required on slides without interactions, so I don't like this solution. I could also make a slide on enter play Audio and choose the wav file, but then the subtitles are not displayed.

  So the question is, how do I slide automatically play the audio level of the blade without the student having to click on the play button to go? Slides with interactions should behave exactly like the other slides with objects/widgets on them. This automatic suspension thing is driving me crazy!

  Thank you

  Lori

  Lori, this is confusing! You're talking about one of the learning interactions included with Captivate? If Yes, which? My amazement is due to the fact that what you described, it is what has happened to the COP6: interaction paused to slide to the first image (I got a work around for audio). But given that CP7 interactions do not hang any slide, you will need to provide the break yourself. There are a few exceptions closely (games).

  Lilybiri

• Device right out of windows and sliding bottom don't work in all applications. In the pictures folder slide bar does not remain in the position. It slides up. How can I fix it?

  The cursor does not work in all applications.  I was allowed in word documents.  When I click on the connection box, I don't get the drop down with choices; the choice will Flash and then disappear.  A spreadsheet in Google docs, does not work with the cursor.  the window opens to the right and if I drag the slide to the left, it slides back just before I can select one cell.

  I tried to empty the caches and history (successfully, I think).  I use Mozilla and Safari.  Gmail was my first instance of the problem with th elog-in box.  Now, the problem seems to be spreading.

  Hi Kenypat,

  A. - what happens with internet explore?

  B. what applications like Excel, Notepad, etc.?

  You try to run a scan for viruses on your computer and check if the problem persists.

  http://www.Microsoft.com/security_essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If the problem is with other browsers, you will need to communicate with them in that regard.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• [Living corners] ALT-click and double-click don't work

  This should be easy... I'm trying to implement the living corners on a rectangle shape. Specifically, I'm trying to...

  1. View the range of corners by double clicking on the widget.
  2. Change the type of corner in alt-click on the widget.

  In both cases (when I double click on the widget or alt + click on it) it simply sets the radius of rounding. He cannot make the changes described in the tutorial video (CC Illustrator Live Corners). I realize I can work around the problem by working directly with the Palette of corners (by clicking on the link of the main toolbar). It's just that I love shortcuts and they don't seem to work!

  Any ideas?

  Sébastien.

  I found the problem.

  When you run a licensed version of Teamviewer 9 (v9.0.32494), Adobe Illustrator don't like ALT + click or double-clicks to living corners. When I stop 9 Teamviewer, it starts working again. When I start it, I stop working again. It is reproducible, so I'll put it down, as the diagnosis.

  In summary, if your corners to live responds more to ALT + CLICK or double clicks, tries to find a version of Teamviewer on your machine and disable it while you work.

  Thanks for all help!

  Sébastien.

• I spilled juice on my keyboard and some keys don't work, how can I make it work? :/

  I need help, I spelt juice on my keyboard and some keys do not work. How can I solve this problem? I tried to remove one of the main, but it has messed up it more, I NEED HELP. Please, I beg you! Tell me a solution how to fix this please!

  Replace the keyboard.

• Satellite A505 - ECO and button mute don't work

  Good evening everyone,

  Forgive me, but I'm new to this forum.
  The ECO utility and mute didn't seem to work on my laptop. When I press the button mute I hear a beep but i still get sound and when I press the eco button nothing happens.

  However, the volume keys Up and Down works play/pause and skip buttons work fine when I'm listening music.

  Any suggestions would be greatly appreciated, I love this laptop. Was my first, so you can understand why I'm having these issues and cannot remedy. But I think it is happening, finally, I did an update, do not know if this is what caused it.

  Again any help in this matter would be greatly appreciated...

  Hello

  Seems a (possibly windows) updates confusing the registry and this could be the reason for this
  Usually the VAP (value added package) control buttons.

  This is why I would recommend that a proposal of solution; Reinstall the VAP.
  Visit the page of the Toshiba driver and download the good PPV for your notebook from the series.
  Remove the old, reboot the device and reinstall the VAP.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Paved touchscreen and button right does not work on Satellite L300 with Vista

  My right button does not work.
  By clicking on the icon on the desktop, the drop down menu does not open and when you work in some programs (Indesign).
  In addition, sometimes the touchpad does not work.

  Reset is useful for a little bit.
  I have install the driver of Synatpics 11.2.4.0.
  Is there something else I can do besides sending it to be repaired.

  I just got this laptop 3 weeks ago and I hate Vista.

  Hello

  I put t think this could be a hardware problem.
  First of all, you should try to update the driver for the touchpad.

  First remove the touchpad driver in the system.
  Then, visit the page of European driver of Toshiba and download the latest touchpad driver and install it.

  PS: If you use an external mouse and that you have installed the mouse drivers/tools then this could also affect the functionality of the touchpad.

  Please also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38792

  Welcome them

• Jabber "work' from the outside (internet) don't"work"well internally.

  Hi all

  I had problems with my jabber,

  in my case, I just use the local DNS server for internal jabber client and use host etc. for external jabber client in the laptop.

  Logon and the intercom call jabber works fine, , but I can not connect use jabber from outside (internet).

  There is no firewall in my LAB topology,

  just:

  -> MCU 5310

  public-> router-> switch-> VCS-E (static NAT 1:1)

  -> VCS - C

  -> TMS

  VCS-E use single NIC and it using a NAT 1:1 to the public.

  and here's a screenshot of my VCS E DNS and VCS - C research.

  

  

  Please advise...

  Thank you

  Ovindo

  Hello!

  In short, if you use the 1:1 NAT it is mandatory to have the 'dual interface option', even if you only

  use an interface, but allows a field set the external nat IP.

  Also all communications to this interface must go to the external ip address.

  You want to use the records SRV records in addition has if this area must be accessible.

  Learn about deployment guides, including:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  In addition, there are several assignments similar issues here in the forum, please use the search or google.

  Please remember useful frequency responses and identify useful or correct answers.

• my symbols don't work well, but they work very well for my colleague?

  Our design department uses created symbols to create the brand packaging. To access symbols all users open a template file from a central server. The symbols work fine for all except a user. When he tries to use the work in the incorrect symbols symbols and the location of the objects are moved. When he saves the file and another user opens the work appears correctly and symbols of good air. Why its symbols are defective?

  I solved my problem. There was a policy in the symbol that was not installed on the users system. All of the object around the police seem to be moved, but after that the police has been installed the objects appeared again normally. It is strange that no warning of missing fonts presented themselves.

• My screen touch iphone 5 does not work well when charging. Please someone help me

  Members of the apple, Hello

  When I'm using my iphone and he is in charge the touchscreen does not work well

  Why apple made this feature on ios?

  Try

  http://support.Apple.com/en-us/HT201559

• How can I create a network and put in on my iphone 4S for use with wifi?

  I have a phone, a personal hot spot 4s, a router and a broadband cable. Everything is running but I can't figure out how to get my network on my iPhone for use with Wifi.  Also, I don't know how or where on the phone to set the password and since I don't have a different password, I can't use my wifi?  Help, please!  My iPhone tech is exhausted and I'm going against a brick wall with my internet service who refuses to provide me with their ISP, etc.

  Hello

  Please ask your question the following support forums.

  iPhone: Apple Support communities:
  https://discussions.Apple.com/community/iPhone?CategoryID=201

  Concerning

• Update query works well when a subquery in where the article is wrong.

  Hello
  
  I executes a statement-update
  
  Update table set Column1 = 2000
  where a.column2 in (select column 3 of table b where b.col4 = 111)
  
  Now when I run the subquery: select column 3 of table b where b.col4 = 111-> it gives me the error ' identifier not valid col 3.
  
  But when I run the full query, then it updates the 700 lines.
  
  Can someone there explain please?
  My subquery throw error but when I use it in another application it works well.

  Col_3 must be in your external table (table_a, I guess).

  If you always the prefix names of columns with a table alias, you know in an instant.

• Aggregation in IR works incorrectly when using calculated columns breaks

  I have a problem with the aggregation in IR when using stops on calculated columns.
  
  Please see the exact steps to reproduce the problem in my next post below
  
  Martin
  
  Published by: Martin Krepelka, October 22, 2008 11:18

  Martin,

  I filed a bug about the problem you are having. The problem is when you control break on a calculated column with defined format mask and aggregates, the aggregate information is not displayed correctly. When I run the interactive report in debug mode, I see that analytical for aggregated information function partitions incorrectly. Using your example:

  IR runs this query to get the counts for each month of posting:

  count("AMOUNT") over (partition by "POSTING_DATE")
  

  Instead, it should run this query:

  count("AMOUNT") over (partition by to_char("POSTING_DATE",'RRRR/MM'))
  

  To work around the problem, you can change the calculation month without the format mask view and set to_char(F,'RRRR/MM'). Aggregates will display correctly.

  Christina