LJP Color MFP M276NW 200: the 49 Service error

Similar Questions

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• HP LaserJet 200 color MFP M276nw trouble after faxing

  My operating system is Mac OS 10 10.6.8 product # is CF a 145.  When I send a fax, it goes through, but then I get a 'call' short message and then I get a message 'connection' that don't die out.  If I hit Cancel, and then 'Cancel' message comes on but won't turn off.  I have a Panasonic 5.8 GHz Digital expandable wireless answering machine and 5 handsets that are connected to the base unit.  I have not connected the base unit to the printer.  That I should?  Help, please.  It's a 2 line phone system, but I'm now using only one line.

  Hey Lakewoman,

  I understand that you have a problem with sending a fax from HP LaserJet 200 Color MFP M276nw.

  Unplug the phone devices that you have plugged into the phone jack.
  Connect one end of the telephone cord provided in the box with the printer on line 1 port at the back of the printer.
  Make sure that you connect 1 end to the telephone outlet and other online 1 on printer
  Use only the telephone cable provided with the printer

  This document will help help.

  http://support.HP.com/us-en/document/c03363598

  Please do not hesitate to contact me if you have any other questions

  Thank you

• Connectivity Bluetooth on HP Laserjet Pro 200 color MFP M276nw

  Madam/Sir,

  There the bluetooth on HP Laserjet Pro 200 color MFP M276nw connectivity?

  Hello

  I looked towards the top of the form to you, and not, unfortunately there is no bluetooth device.

  http://support.HP.com/us-en/document/c03315988

• HP Laserjet Pro400 M401dn: the 49 Service error

  Error 49 Service on screen touch printer. Will print no from a Microsoft Office document.

  Have followed the instructions (by HP support) to close printer, unplug the USB and disconnect the power supply to the power surge suppressor and then plug the electrical appliance into the wall socket. Then reconnect USB. All done, rebooted the printer and printed a document internal printer (report Configuration and Menu support) which printed fine.

  But printer will not print a document from Microsoft. Of the 49 Service error. Use Microsoft Office v.X student/teacher edition for Mac (2011).  It was most recently updated, 10 may 2016 with office update 14.6.4. I printed some documents after this update, but now this 49 daycare error appearing.

  Product number for this printer Laserjet Pro400 M401dn is: CF278A

  Any help would be appreciated.

  Steve945

  If you unplug the printer from the computer or network and turn on the fact come ready.  If so, then the print job that is still trying to print or a new print job is causing the error.  Delete all print jobs from any computer that uses the printer.  First upgrade the firmware using the easy firmware updating program.  Then try the same job and see if works.

• the white pages when printing for laserjet pro 200 color MFP M276nw

  When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

  You are unable to print the 'print quality Page' of the façade or do not know how?

• HP LaserJet 200 color MFP m276: HP LaserJet 200 color MFP m276nw - scaning problem

  Dear gentlemen/ladies, Documents on the flatbed scanner / / UH m276 Color MFP HP LaserJet 200 cannot be scanned in the network folder, scanner, in my office by WiFi. He keeps giving the error message "username or password is incorrect. This user account and password are valid. "Please note that the wireless test is successful. A such problem, until the desktop computer (some bad sectors on the hard disk) has been repaired at the shop of the computer a week ago. However, I can use apps in my office to print and use the HP LJ200 M276 Scan to scan documents on the printer tray and save it in any folder remotely via WiFi. Please please advise solution/method that I can do to solve this new problem. Stephen

  Hi @U-Talents.

  Welcome to the Forums of HP Support! I read your post and see that you are not able to scan to network folder. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I have provided a document to configure the scan to network folder. Follow the steps, there is a section to create the folder and set up the sharing and security:Scan of the control panel (including Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

  This post is @wardell1, it can also help with this error message: try to configure the scan to network folder, name of user and password is incorrect. Do not take into account the model.

  I have also provided a @ShlomiLstation, on the same issue: scan to network folder fails.

  Try these documents to see if they help, and if there is anything else I can do, let me know. Thank you.

• LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB

  Hello

  I install my Color LaserJet Pro 200 m276nw MFP to connect to my home network using a wired connection.

  When directly connected to my router, the connection initializes and successfully receives an ip address. I was able to access all the functions connected to my router directly either wired or wireless network.

  I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with all the other sevice in my network, including a few game consoles and a Mac Mini.

  Is there a network advance setting that I have to look?

  Thank you

  Hello

  I don't know if an IP address conflict is my problem as it is not a problem with another device on the network. But it is certainly a kind of incompatibility.

  I found a work around. I have an old LInksys WRT54GS router, I was about to sell and read that I could turn in a switch with a custom firmware, DD - WRT. After you have installed the custom firmware and following some instructions to configure in a switch (including setting a fixed IP address as you suggested), the router-turned-switch worked like a charm.

  So, it is definitely an incompatibilities with the Linksys Hub EFAH05W. Maybe this printer don't like hubs. I read the hubs do not succeed as a router or a switch network traffic only.

• m276nw: more great paper for hp laserjet pro 200 color mfp m276nw tray

  Is there an extra tray for the m276nw

  Sorry, the input tray 150 standard page is only available for the HP Laserjet Pro 200 m276nw Color MFP tray.

• M476dw MFP: the 49 service error

  Tried to print something the printer network today and the Panel of the printer just shows "49 Service error, switch off the power, then press. So I did and tried to print again, but got the same thing.

  I downloaded the latest version of the software of HP and installed but have not seen any different.

  I found the solution with regard to logging on the Advanced tab and turn off everything not necessary, but that did not help me.

  I printed the page diagnostics from the front panel (so the machine can still print things), but nothing has jumped out to me. It's basically a bunch of numbers in any case. I did the same thing for the configuration report, and which did not contain anything that could be useful for debugging.

  I tried to disable WiFi and simply connect via ethernet, no joy. Still the error.

  I tried disconnecting ethernet and printing via a USB cable instead. Always had error 49

  So I reset the printer to its default value, and now he has an ethernet DHCP rather than static I would manually assigned before id. Still no joy, even if the symptoms are a little different now.

  (1) I click on print to a PDF file

  (2) I don't see the PDF through the printing on OSX El Capitan system and be sent to the printer

  (3) I see the printer accepts the file, showing the "print document" on the front panel

  (4) the printer returns to the home screen without printing anything and OSX it's printed.

  So far he has been a reliable printer, of course, he begins to act up right after that its warranty period is over...

  Anyone got any ideas? I don't like the idea of paying for a "single-use" support contract and said (as others have apparently said) to it reboot again and again with increasing delays between reboots.

  See you soon

  Simon

  First I will open a parenthesis, you must still pay for electronic devices with a Discover credit card that doubles the manufacturer's warranty.

  Secondly, is it always the same file that is causing the error?

• My HP LaserJet 100 color MFP M175nw Gets a 54.2 error message

  My HP LaserJet 100 color MFP M175nw Gets a message from 54.2 error, I thibk something stop them from turning. How to manually turn the toner cartridges to get out? the knob does not work.

  Hi mazz154,

  If any of the cartridges get stuck the carousel could not turn depending on how stuck cartridge is. To move the carousel you must have released brake and then find a place on the carousel to do turn to the next cartridge door. Just make sure that you do not touch the mag of the cartridges ink roller with your finger as the oil on your hands can damage the toner mag roller. If you are unable to follow the procedure described in my previous post due to a jam cartridges you will need to call technical support in 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If your printer is no longer under warranty, you will need to review the document below.

  HP out of warranty of the Support Options for HP select consumer printers *.

  Let me know what you find?

• M475dw multifunction color HP Laserjet Pro 400 - 49 Service error

  I get the error "49 service error" when printing any PDF from adobe acrobat reader document is DC

  If I print the same document from the same network share on the same printer using the player of acrober (no), it prints very well. Go figure.

  PDF is adobe.  First thing would be to update the firmware of the printer or change the PostScript driver from adobe.

• The Win32 Service error

  Received message ' Download updates for Generic Host Process for Win32 Services error ". Error is assumed occure in computers with Windows XP Service Pack 2 and security update of 87333 (MS05-012) I followed the instructions on how to determine what version of Windows XP I have.  I have "Version 5.1 (Build 2600.xpsp_sp3_adr.101209 - 1647: Service Pack 3).» What do I do about this error?  Should I be worried?  My computer is SUPER SLOW today.  And I got a virus on Thursday and Friday of last week that Norton Live Help went and deleted.

  My computer is SUPER SLOW today.

  http://www3.TELUS.NET/dandemar/slowcom.htm>

  Have a look here: http://forums.whatthetech.com/Help_My_computer_slow_t74560.html>

  04/05 / 1101:30: 22:00

• The Publishing Service error

  Hello

  I get the following error message every time I'm trying to use the Publishing Service box: ?: 0:attempt to index field 'exportSettings' (a nil value)

  See the image below

  I disabled all plugins except the hard drive. Whenever I click on 'Set Up' where it says error window appears.

  I can't go to the nursery of publication but I can't configure settings of the HDD - whenever I have save I always get the 'Set Up... »

  I tried to delete the preferences file and reinstall Lightroom but the same thing happens

  

  Thank you

  I ended up uninstalling Lightroom more all additional files in LR and folders and reinstall - this fixed the problem

• HP LaserJet 200 M276nw: Configuration of the network for HP LaserJet 200 color MFP M276nw

  Can the M276nw of 200 HP LaserJet can be configured to scan to a network without initial setup of a PC folder? Without having first to connect the unit to a computer first.

  We run a virtual environment and the printer will need to scan to a folder configured network and this should be done through the device. Of course, file permisisons will be completed before. I think I saw a manual where the Embeded webserver had this configuration, but would have to make sure, before committing to the purchase. Thanks in advance.

  We gladly invite you.

  Yes, the printer supports the SMB Protocol indeed.