The Win32 Service error

Similar Questions

• On startup, I get the following error message: Generic Host Process for Win32 Services error

  I received the following error message: Generic Host Process for Win32 Services error on commissioning. Reading the Forums help. I have all the Service Packs and the automatic updates of Windows XP. More Norton AntiV and utilities. What can I do as I am all updated and I have Norton? KB - 894391 fix Windows Will interfere with what anyone, even if I have already? Should I run Windows Essentials?

  Thank you!

  Well, I'm quite sure that committed Microsoft Support Engineer 'expert' is just send you on another of their many wild goose hunting.

  Surely, Imran M will come up with some other ideas - it's their job and they are the ones that Microsoft hired as their "experts".

  Tell us exactly the message that see you in its entirety, follow this:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Then stand out my answer as the 'response' (which you do) for other people will see the topic is not resolved and you offer other ideas.

• HP Laserjet Pro400 M401dn: the 49 Service error

  Error 49 Service on screen touch printer. Will print no from a Microsoft Office document.

  Have followed the instructions (by HP support) to close printer, unplug the USB and disconnect the power supply to the power surge suppressor and then plug the electrical appliance into the wall socket. Then reconnect USB. All done, rebooted the printer and printed a document internal printer (report Configuration and Menu support) which printed fine.

  But printer will not print a document from Microsoft. Of the 49 Service error. Use Microsoft Office v.X student/teacher edition for Mac (2011).  It was most recently updated, 10 may 2016 with office update 14.6.4. I printed some documents after this update, but now this 49 daycare error appearing.

  Product number for this printer Laserjet Pro400 M401dn is: CF278A

  Any help would be appreciated.

  Steve945

  If you unplug the printer from the computer or network and turn on the fact come ready.  If so, then the print job that is still trying to print or a new print job is causing the error.  Delete all print jobs from any computer that uses the printer.  First upgrade the firmware using the easy firmware updating program.  Then try the same job and see if works.

• M476dw MFP: the 49 service error

  Tried to print something the printer network today and the Panel of the printer just shows "49 Service error, switch off the power, then press. So I did and tried to print again, but got the same thing.

  I downloaded the latest version of the software of HP and installed but have not seen any different.

  I found the solution with regard to logging on the Advanced tab and turn off everything not necessary, but that did not help me.

  I printed the page diagnostics from the front panel (so the machine can still print things), but nothing has jumped out to me. It's basically a bunch of numbers in any case. I did the same thing for the configuration report, and which did not contain anything that could be useful for debugging.

  I tried to disable WiFi and simply connect via ethernet, no joy. Still the error.

  I tried disconnecting ethernet and printing via a USB cable instead. Always had error 49

  So I reset the printer to its default value, and now he has an ethernet DHCP rather than static I would manually assigned before id. Still no joy, even if the symptoms are a little different now.

  (1) I click on print to a PDF file

  (2) I don't see the PDF through the printing on OSX El Capitan system and be sent to the printer

  (3) I see the printer accepts the file, showing the "print document" on the front panel

  (4) the printer returns to the home screen without printing anything and OSX it's printed.

  So far he has been a reliable printer, of course, he begins to act up right after that its warranty period is over...

  Anyone got any ideas? I don't like the idea of paying for a "single-use" support contract and said (as others have apparently said) to it reboot again and again with increasing delays between reboots.

  See you soon

  Simon

  First I will open a parenthesis, you must still pay for electronic devices with a Discover credit card that doubles the manufacturer's warranty.

  Secondly, is it always the same file that is causing the error?

• The Publishing Service error

  Hello

  I get the following error message every time I'm trying to use the Publishing Service box: ?: 0:attempt to index field 'exportSettings' (a nil value)

  See the image below

  I disabled all plugins except the hard drive. Whenever I click on 'Set Up' where it says error window appears.

  I can't go to the nursery of publication but I can't configure settings of the HDD - whenever I have save I always get the 'Set Up... »

  I tried to delete the preferences file and reinstall Lightroom but the same thing happens

  

  Thank you

  I ended up uninstalling Lightroom more all additional files in LR and folders and reinstall - this fixed the problem

• The Update Service error OR

  Hello

  I have a problem with the installation of updates using Update Service. I was able to download all the updates, but I'm unable to install them. I got the following error.

  The update version is 2.3.0.70. I tried to run as administrator and disable the firewall, nothing has worked.

  When you try again yet give you a problem?

  What updates you trying to install?

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments

• LJP Color MFP M276NW 200: the 49 Service error

  Printer worked fine for about 12 months. Suddenly get this error 49 service and won't go away, despite the power cycling.

  It was on a wi - fi connection, but it does on ethernet cable too.

  Click on the Windows icon at the bottom left of the screen

  Start typing: devices and printers

  When you see devices and printers in the search results, click on it.

  Right-click on your printer, and then click on see what's printing

  Right-click on the job at the top of the list

  Delete it!

  If my answer has solved your problem, please mark it as a solution by clicking on the button under the post.

  If any Tech gives you helpful suggestions, you can thank them by giving them "Well done" (just click the "Thumbs Up" button under the post).

  If you're in the right mood, you can even click on the two buttons...

• (bb10) The push service error

  Hello!

  When you try to register on the push on my app on Simulator service, I get an error:

  Cannot create PushService due an internal error trying to allocate system resources

  Very strange, doesn't have enough resources?

  I could do something wrong, but what?

  I use the Las and gold Simulator SDK.

  There was a recent article on the blog on the modification of the service Push...

  Kind regards

• XP will not acquire an IP address. Start tcp/ip and obtain the dependency service error. Public static IP and the system still does not work.

  This system was given to me the difficulty.  It is clean of viruses and spyware, it was at a time given some.  Now unable to connect to any type of network, IPs as 0.0.0.0, will not be renewed.  Get dependency errors when I try and start TCP/IP.  I reset the winsock stack.  Any suggestion at this point would be useful.

  Hi MarkReeves,

  1. What is the accurate and complete error message?

  I suggest you try the steps from the following links in the article and see if it helps:

  The network status icon may display a message 'Acquiring network address' after an address is already acquired in Windows XP Starter Edition

  How to reset the Protocol Internet (TCP/IP)

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  I hope this helps.

• The Push Service - error of TOO MANY RECORD registration

  Hello

  I followed https://developer.blackberry.com/android/apisupport/creating_push-enabled_android_apps.html, but when I run the app (on Z10 and Q10), I got an error.

  GCMBaseIntentService (84508920): error of registration: TOO_MANY_REGISTRATIONS

  Our account to push BB is account PROD. What is this error? and how to solve? Thank you.

  This error can occur if you have another application (or another version of the same application) running on the device at the same time using the same ID push App.

  If you happen to fit the situation described above, you must remove all applications (including development) of the device then restart, this clears the check and expected to yu save ID against a new application.

• The generic host error and 100% CPU usage

  OK, I have a friend who has a problem that I tried to help him.

  two different problems what I beliave are related to each other. About every 4 hours a serive generic host error will go up. The only thing can be made once this error occurs, is a reboot. Sometimes this error happens at different times, but especially at intervals of 4 hours.

  Second problem is that one of the svchost.exe process will peg the CPU at 100%. Sometimes the generic host service will pass about 10 min. after that the CPU will 100% sometimes if you leave sit PC long enough for svchost.exe CPU utilization will be brought back to normal. It may take up to an hour or even longer.

  This PC had Mcafee at least 2 years, and all windows updates and dat files are updated. So it shouldn't be a virus. It is not get used for much more then the e-mail and web browsing lite. I have seen some information about the windows auto updater causing problem and followed the instructions to fix this. It will appear to work for the rest of the day then get back to the top. I ran about 5 different virus, spyware, malware, scans etc. on it and he comes clean each time. I've been a PC Tech for 12 years and checked and tried about everything I can think of short of formatting and to start over, the list of what I've tried is long to enumerate hear. I hope input fresh can help pinpoint the problem.

  I never liked using a clean install as a miracle solution. You never hear anything like that, more it can be a big pain in the rear to the person using the PC. So, any help would be appreciated!

  the PC is under Win XP SP3

  Please check this utilities

  File name: fix generic host of microsoft.zip

  Download link: http://download552.mediafire.com/ec1vcmlflrmg/dw4m0nzzyv3/generic+host+fix++from+microsoft.zip

  File name: Generic Host Process for Win32 Services error FIX.rar

  Download link: http://download854.mediafire.com/4uq4ezbelbog/xllawtnuazj/Generic+Host+Process+for+Win32+Services+Error+FIX.rar

  File name: windows to doors cleaner.exe

  Download link: http://download919.mediafire.com/ykd77aa8bhdg/qzmzvwzymnm/windows+worms+doors+cleaner.exe

  Concerning

  Jinish.K.G

  RRC Cochin

• 79 Service error on Printer series color LaserJet Pro 200 M251

  I use this printer with the operating system Mac OSX 10.9.4 for about 9 months.

  Now, I get an error message from the Service 79. I tried to turn off the printer and the several times without success.

  Curiously, when I try to print a document, a message keeps appearing on my computer that says "the printer has been suspended. You want to resume printing? "When I click on the button resume, nothing prints.

  The manual States that the 79 Service error message is related to a firmware issue? Do you know how I can fix this problem?

  Thank you very much

  Stone

  Hi NebraskaPierre,

  By your post, I see that you have found a Service 79 error on the printer. I can help you.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  This can be caused by malformed PostScript documents.

  Follow these steps:

  Locate the power switch on the bottom of the printer.
  Turn the printer off position and COUNT to 10.
  Turn on the printer and the system should be all together.

  Try printing from another application to see if you have the same problem.
  
  If a print job from your hand repeatedly causes this error, this may indicate a problem with the print job.

  Try to split your document upward more before they print it.

  Fix permissions of the drive on the Mac:

• HP Laserjet M277dw MFP: HP Laserjet Pro M277dw - low memory/job cancelled MFP & 49 WINDOWS service error

  Ok.  I've seen other messages with this error.  But I think mine is a little different.

  The problem: Prnter will not print anything at all, even a test page.  It will not copy anything either.  Low memory - cancelled job message comes up / have worked perfectly for 2 days, and then it started.

  Printer is connected via the network (wired), but I have tried wireless also.

  Software is installed on a machine windows 10.

  In addition to the windows machine, print requests are sent to her through the network via an iPad and an iPhone.  HPeprint is also used.

  Troubleshooting: I did the following in trying recify problem:

  Printer disconnected everything on during 30 seconds.

  Reset the default printer

  Redid the installation of the network via the touch screen

  Deleted printer in windows and deleted driver packages.  Reinstalled using the supplied software.  Also tried to install using "add a printer" in windows.

  Possible corrections that do not go to work or to me:

  Put in place as a printer IP - he loses the feature and choose but in addition to the drivers manually to scan etc...

  Connect via USB to the computer - if I do this do not lose the ability for the iPad and iPhone to print on the printer - or at least makes this dependant on the computer is turned on and sharing put in place

  I will say that after I tried to implement the prnter using "add a printer" in windows, I couldn't get the printer to print the test page - nothing happened, but did not get the memory error message.  I removed from the print queue and even deleted all the files in the subdirectory of coils in system32...  ButI cannot get rid of the printer now under "devices and printers" in the Panel...

  Help, please!  Pulling left what my hair on...

  Thank you

  THIS PROBLEM HAS BEEN RESOLVED.

  After several weeks of rtying many different things to fix problems

  (1) after installing the new modem Arris double band by carrier Internet, printer would no longer.  First issue was an error of memory.  After reset printer would no longer at all

  (2) I tried installing and uninstalling printer wireless in several ways, ethernet and USB.  Printer would never even print a test page.  Attempts to print the pages of any other report or configuration would result in the 49 service error

  (3) BrightHouse (carrier) was 3 separate times to tweak the modem, try to uninstall and reinstall the printer, etc.

  The problem turns out to be that with some modems, HP can not communicate over IPv6 with modem you (they don't play well together using IPv6) either because of the HP or the modem, HP likely due to the fact that he always seems to be HP printers with this problem.

  Here are the steps I took finally solved this.  Please note that the solution came from a technician BrightHouse to a different Web site.  I'm just passing along the info in case it helps others:

  (1) completely uninstall the printer from the PC, including the printer, he installed all the software, drivers and all the ports that you may have created trying to recify problems

  (2) to shut down the computer

  (3) disconnect the ethernet cable from the printer (as applicable)

  4) click on the reset button on the home screen to reset to the default values for the printer

  (5) do a cold reset the printer (people of email support the HP for the procedure)

  (6) on the interface of the printer (screen), go into the settings; network settings, network services.  Here you will see IPv4 and IPv6.  Disable IPv6.  Don't mess wth IPv4 (leave it on).

  (7) plug the ethernet cable into the printer or activate/configuration of wireless settings using the printer (screen) interface.

  8) turn on the computer

  (9) install the printer using the CD that came with it or installation software downloaded from the HP website.

  I'm not sure that each of these steps is absolutely necessary, as step 4, but that's what I did...

  I saw so many messages on the internet with HP printers not install correctly and launch a 49 service error instead.  Not sure how those problems, This applies.  But HP needs to fix this issue with their printers IPv6 or at least try to find the cause...

• The HP printer error

  I have a jet laser pro M275 get 79 service error. TRN and always on the same message again. Changed ink crt printed now.

  Hello Gmom25,

  Welcome to the Forums of HP Support! I see that you run an error on your HP Laserjet Pro M275 "error 79Service".  Go ahead and try a cold reboot:

  (1) disconnect the power supply to the printer.
  (2) hold the symbol (*) & enter buttons simultaneously and switch the power on.
  (3) wait until you see "Permanent storage init" msg (I think that this is but not sure the exact msg) and then release both keys.

  If you still receive the error after the reset, have a look here: Solving of control panel Messages, according to table looks like this error may be related to the Firmware.

  In my view, there was an update sent 2013-11-06, which includes many improvements and fixes. Please select your current operating system in the drop-down list, click Next and under the Firmware section to try and install the update, if you are able to get out of the error state.

  If you are unable to get rid of the '79 Service error", I suggest to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• I get the error "Generic host process for Win32 services has encountered a problem and needs to close."

  Original title: I'm under Win XP Pro 64-bit with an amd processor.

  Hi all

  I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work?  Don't forget that I'm running 64-bit software.

  The search does not work.

  Any help would be great.

  Hi bohawk,

  I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.

  I hope this helps. If this isn't the case, answer so we can look for other options.