LM arrive at the same ESXi server on which it is installed?

Similar Questions

• VM in DMZ and LAN on the same ESXi Server VM

  It is advisable to run two virtual machines on a physical ESXi Server considering only

  a VM THAT is connected to the DMZ (demilitarized zone) and another VM is connected to the local network.

  For example, a virtual machine can be a gateway mail server in the DMZ and

  another VM can be located in LAN mail server.

  ESXi box has multiple network cards, so a single card could be connected to the DMZ and others to the local network.

  Is it dangerous from the point of view of security?

  It becomes really dangerous if you have a virtual machine that is connected to two networks at the same time if not online, there is no way known to cross borders. Other that that, you should be good to go

  Steve Beaver

  VMware communities user moderator

  VMware vExpert 2009

  ====

  Co-author of "VMware ESX Essentials in the data center" virtual

  (ISBN:1420070274) Auerbach

  Come and see my blog: www.theVirtualBlackHole.com

  Come follow me on twitter http://www.twitter.com/sbeaver

  *Virtualization is a journey, not a project. *

• Can I use the same NTP server configured in the firewall to guard

  I configured the NTP server in my VCSC Expressway it synchronized correctly, but I'm unable to configured in my VCSC Gatekeeper with the same NTP server address that is configured in VCScExpresway.

  Please suggest

  Hello!

  You use in.pool.ntp.org. This isn't a single ntp server, there is a pool of servers,

  then you might see different ntp servers, and they can also change and sometimes

  It can also happen that yo will get a limit down.

  If I get him here, I have for exmple get:

  $host in.pool.ntp.org
  in.pool.ntp.org has address 113.30.137.34
  in.pool.ntp.org has address 119.226.101.131
  

  and a little later, I got:

  $ host in.pool.ntp.org
  in.pool.ntp.org has address 123.108.225.6
  in.pool.ntp.org has address 125.62.193.121
  

  In any case you want to configure multiple NTP server addresses.

  So, if you want to use this area (India):

  * You must configure these three host names as described here: http://www.pool.ntp.org/zone/in

  * See who works for DNS resolution (which may also be the problem here)

  * you have a suitable internet access

  * see that the firewall is open to 123 to any host on the internet

  * If you are not in India use a different area

  On the VCS under Maintanance > tools > utilities you could for example check if you can resolve DNS and traceroute/ping external hosts on network.

  The other option is to find at least 2 NTP servers you know and that you can use and set up.

  then you could lock the specific IPS in the firewall, otherwise it should be open to all.

  Its also not hard to set up your own server NTP, incidentally.

• You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm c

  Hello

  You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?

  Thank you

  No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  What also good technical details are necessary.

  Mylenium

• GoldenGate replication on the same physical server - REPLICATE always ABENDING

  Dear expert GG,

  I'm completely green with Golden Gate, so I would like to help on why my REPLICAT process abends right after that I put my source database object lines.  I'm following the writeup of Gavin Soorma -.

  http://gavinsoorma.com/2011/08/GoldenGate-replication-with-source-and-target-on-the-same-physical-host/

  I'm trying to implement CDC on the same physical server.  I have a 11g source database that uses ASM and my target is the database 10g that is using traditional file system management.  I am trying to map an object, ggs_owner.myobjects that I created in the two databases.  EXTRACT both REPLICAT start very well, but as soon as I perform an insert in the 11g database and post the lines, my REPLICAT process abends.

  Version information:

  Oracle GoldenGate for Oracle shell
  OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1
  Linux, x 86, 32-bit (optimized), Oracle 11 g on April 23, 2012 08:09:25

  Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.

  GGSCI (localhost) 3 > DBLOGIN Userid ggs_owner@ora11g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 4 > RELEASES
  Operating system:
  Linux
  Version #1 SMP kills Jan 4 15:24:05 EDT 2011 version 2.6.18 - 238.el5
  Node: localhost.localdomain
  Machine: i686

  Database:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE 11.2.0.1.0 Production
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  GGSCI (localhost) 7 > DBLOGIN Userid ggs_owner@ora10g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 8 > VERSIONS
  Operating system:
  Linux
  Version #1 SMP kills Jan 4 15:24:05 EDT 2011 version 2.6.18 - 238.el5
  Node: localhost.localdomain
  Machine: i686

  Database:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  PRM file content

  EXTRACT the content of the Param file

  extract extlocal
  SetEnv (ORACLE_HOME="/u01/app/oracle/product/11.2.0/dbhome_1')
  SetEnv (ORACLE_SID = 'ora11g')
  ggs_owner username, password ggs_owner
  localhost.localdomain, mgrport 7809 rmthost
  rmttrail ./dirdat/aa
  TRANLOGOPTIONS ASMUSER sys@+ASM, oracle ASMPASSWORD
  table ggs_owner.myobjects.

  Content of the file param REPLICAT

  REPLICAT replocal
  SETENV (ORACLE_HOME="/opt/oracle/product/10.2.0.1')
  SETENV (ORACLE_SID = "ora10g")
  ASSUMETARGETDEFS
  Ggs_owner username, PASSWORD ggs_owner
  DISCARDFILE. / dirrpt/discard.txt, APPEND, 20 MEGABYTES
  CARD ggs_owner.myobjects, ggs_owner.myobjects, KEYCOLS (object_id) TARGET;

  Complete the following steps in GGSCI:

  GGSCI (localhost) 103 > add extract extlocal tranlog start now
  Added EXTRACT.

  
  GGSCI (localhost) 104 > add rmttrail ./dirdat/aa gets extlocal
  Added RMTTRAIL.

  
  GGSCI (localhost) 105 > dblogin Userid ggs_owner@ora10g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 106 > add replicat replocal exttrail ./dirdat/aa
  ERROR: No control points table specified to add REPLICAT.

  
  GGSCI (localhost) 107 > add replicat exttrail ./dirdat/aa NODBCHECKPOINT replocal
  REPLICAT added.

  
  GGSCI (localhost) 108 > dblogin Userid ggs_owner@ora11g, password ggs_owner
  Connected to the database.

  GGSCI (localhost) 109 > start extract extlocal

  Sending START request manager of...
  EXTLOCAL EXTRACT from

  
  GGSCI (localhost) 110 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING
  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:02
  REPLICAT ORDER REPLOCAL 00:00:00 00:01:27

  
  GGSCI (localhost) 111 > start replicat replocal

  Sending START request manager of...
  REPLICAT REPLOCAL from

  
  GGSCI (localhost) 112 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING
  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:09
  REPLICAT RUNNING REPLOCAL 00:00:00 00:00:04

  In another window, I do the following:

  SQL > connect ggs_owner@ora11g
  Enter the password:
  Connected.
  SQL > select count (*) from myobjects;

  COUNT (*)
  ----------
  71932

  SQL > truncate table myobjects;

  Table truncated.

  SQL > insert into select MYOBJECTS * from DBA_OBJECTS;

  71932 lines were created.

  SQL > commit;

  Validation complete.

  When I return to GGSCI, I see that the process has added:

  GGSCI (localhost) 132 > news

  Program status group Lag time since Chkpt Chkpt

  MANAGER RUNNING

  EXCERPT FROM RUNNING EXTLOCAL 00:00:00 00:00:07

  REPLICAT REPLOCAL ABENDED 00:00:00 00:00:02

  When I can look at, or what can I add to the param REPLICAT file that might help identify the root cause.

  Any help would be appreciated.

  Thank you

  Prom

  Hello

  Since no one has replied, I can go with my assumptions that replicat process searches across data dictionary, and since he is a 11g Golden Gate executable, its not backward compatible with 10g.  To this end, I have duplicated my database with RMAN DUPLICATE ora11g, creating another database called ora11g2, changed my REPLOCAL. PRM file as follows (changes in bold):

  REPLICAT replocal
  SETENV (ORACLE_HOME = "/u01/app/oracle/product/11.2.0/dbhome_1")
  SETENV (ORACLE_SID = "ora11g2")
  ASSUMETARGETDEFS
  Ggs_owner @ora11g2, ggs_owner PASSWORD username
  DISCARDFILE. / dirrpt/discard.txt, APPEND, 20 MEGABYTES
  DDL INCLUDE ALL
  CARD ggs_owner.golden, TARGET ggs_owner.golden, KEYCOLS (gold);

  I then rebooted the components again, and finally, I was able to replicate the changes to the GGS_OWNER table. GOLD ora11g, at the same table in ora11g2.

  Thank you all.

  Prom

• Update the Bios ESXi server

  I use 5.1 ESXi and I want to upgrade the BIOS on the server. I downloaded the dell BIN file and place it in a tmp folder in the ESXi server. How can I install this bin file in the server? Can what commands I use to do it?

  Thank you

  Benito

  You won't be able to go in ESXi. See http://communities.vmware.com/people/vmroyale/blog/2010/12/29/how-to-install-vendor-updates-on-server-hardware-running-esxi for a set of instructions, that you can use.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• How to run 2 different applications of the same Application Server

  Hello
  
  I would like to know how to run two different applications of the same Application Server with different databases?
  
  We use
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
  Oracle Application Server 10g 10.1.2.0.2
  
  Kind regards
  
  Hassan

  You can have as much as you want, just your applications should have different names or URLs and point to a specific database (using data sources).

  Greetings.

• Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Please ignore. I disabled the anti-malware and the app is trying to install.

  Thank you

• I would like to create the same mouse over effect which is used on the homepage of Industrial Light

  I would like to create the same mouse over effect which is used on the page home of Industrial Light & magic site. http://ILM.com

  Could you get it someone please let me know what the code or effect which is used. Thank you.

  It seems that there are two shows running in parallel where a mask that follows the mouse has one of them.  The one you see in the mobile mask is on top of the other.

  If you were to search Google for a custom cursor tutorial you'll probably end up by with most of what it takes to get the mask to follow the mouse.

• I can't install vmware server on the same windows server 2008 with Hyper-V?

  I have a server as the active service of Hyper-V, but I want to virtualize a VMware ESXi, andnot with Hyper-V now like to install VMware Server.

  My doubt is: can install two virtualizadores on the same server?

  It is a virtualization server that I have in my environment.

  Thank you

  Diego Paiva.

  I don't know of anyway to run ESXi in hyper - you can do the reverse to install ESXi and then run Hyper-V as a virtual machine.

  As for your second question - if you ask you can install ESXi on top of Hyper-v - you can, but it will overwrite the Hyper-v Forum

• Cursor at the same time serve as control and indicator

  Hello world

  Is it possible to create a custom control that serves as both a control and indicator?  What I want is a slider vertical I can put a value with the help of the thumb or digital input, but I also want a horizontal line which would be about when the filling is (of which the value may come from feedback in my system).  In my case, I want to set the voltage and see the actual voltage measured on the same cursor.  Is this possible?

  Thank you

  Eric

  
  

• How to run customer and display on the same host server

  I know it's simple, no doubt, but I can't find the answer on the Internet. I am running BB 1.9i. Recently, I noticed that my server to display some of the customer was not run tests, as I expected. After some checking, I decided that it was because these customer scripts were not in the configuration of the server. My first inclination was to just add them. However, after a bit of research on the Internet, I have seen many people claiming that the client and the server must be kept in separate directories. So, I created another directory and my client config untarred it. I took care of bb-hosts was correct and then I tried to run runbb.sh in the client. He has already said a running process of Big Brother and abandoned.

  Could someone point out what step am I missing or a link to a web page that explains the procedure for configuring a client on the server to display?

  Kind regards

  Brad

  Hmmmm... only, you should be able to install archive of bbclient (at the same level as your bbserver). Copy the bb-hosts of your BB server and. / runbb.sh.

  You should only get this message "already running", if a client is already running (not the server).

• Creating a new Essbase Cluster on the same Solaris Server

  Hi all

  
  I have two servers:

  Server1: Services Foundation, APS, EAS
  Server2: Essbase server, Essbase Studio on epminstance_1

  Due to the needs of the company, I need to "Rename" pole Essbase "EssbaseCluster-1"to something else... I know that this is not possible and the below document, I understand that I need to create a new instance on server Server2 and configure Essbase and Essbase Studio on it.

  "How to rename Essbase Cluster (Doc ID 1434439.1)"
  Aim: In the version of the EMP 11.1.2.x system, is it possible to rename the Essbase instance and cluster names once they are configured?

  Solution: No, it is not possible to rename cluster or Essbase instance names after the initial Setup. If you must change the instance names and cluster, create the cluster and the new instance. Applications for the export of the old cluster and import them into the new cluster.

  My doubt lies with the 2nd Essbase server configuration as I'm not clear how a unique environment with two standalone instances on the same physical Solaris Essbase server, with each owned their own cluster will behave. I know that they are independent groups and the notion of active/passive and active/active clusters are for part instances Essbase in the same cluster.

  I intend to create a new instance of epminstance_2 on Server2 and configure the 2nd Essbase server as follows: give it a * new * cluster name and not assign to Essbase existing cluster and deploy it in stand-alone mode.

  
  1. now I intend to use the 1st instance only as a backup option. In a case where the new instance should fail for some reason, I would like to start services on the old instance of essbase. Is this possible without any additional configuration or changes to the OPMN?

  2. in the alternative, say we want to remove the old instance. Please suggest ways in which I can surely 'delete' the older cluster (other than uninstall). Also, when users connect using SmartView, they would see the old cluster and new... Is there anyway that I can get rid of the older cluster without having to uninstall everthing on Server2 and start over?

  Thank you!

  It should not be a problem by adding additional instances of Essbase on the same server, it is documented - configuration and start-up additional Essbase Server Instances

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• I have OBIEE 10.1.3.4 and 11.1.1.5.0 on the same Linux server

  We have one OBI 10.1.3.4 installed on a Linux 5.2. Now it's time to update to the new 11.1.1.5.0. Can I just install OBI 11 g on the same computer in an another ORACLE_HOME? Can I run both OBIEE servers on the same machine?
  
  Thank you.

  Yes you can. OBIEE 10 g by default uses ports 9704 and 9703 for messages from Server BI, while OBIEE 11g users the 9500 for analytics, 9702 port for the BI server and 7001 to weblogic Administration console. As long as you use different ports, you should be good. In addition, make sure that you install 11g in a different path where 10g is already installed.

  I hope this helps.

  Kind regards
  -Laurence.