Load a new Deskfile via Ole

Similar Questions

• Load the new Dell XPS 13 9350 via thunderbold usb - c

  Recently bought the new Dell XPS 13 9350, 1080 p with the i5 processor version and I would like to know how to load the xps 13 via usb - c port sight.

  Which cable I'm able to use? I would like to use a male USB - A to USB - C cable to recharge the laptop using usb Sockets aircraft.

  Tracked down the answer:

  It does not simply with phone chargers. He needs Chargers portable a higher voltage. You cannot use cable USB A-To-C to load (unless you have a defective cable seriously, which can damage the charger). You cannot use the Nexus 5 X, 6 p or OnePlus Chargers.

  12-9250 Chromebook Pixel 2 and XPS (and perhaps a few other upcoming 2016 Dell systems) include a USB - C charger that works with the XPS 13 and 15. Chromebook Pixel charger is a wall wart, unlike most chargers for laptop with a brick in the middle.

  Buy a compatible USB - C charger costs as well buy a normal replacement Dell laptop computer charger, so it is honestly not much unless you want to use it on other USB - C devices (whether now or in the future). The Pixel charger can also with phones, but I don't know if the XPS - C USB charger can also.

  You'll also USB - C load with docks. Any USB docking station - C and any wharf 3 Thunderbolt should work with it. Dell has wo of them towards the end of the month of January each offers multiple output video, USB - A, Ethernet, audio ports and in charge. Plugable and some other manufacturers some too.

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• refuse to load the new homepage at startup (Windows 7)

  After the recent updates, the browser refuses to load a new homepage at startup. It "remembers" the old address, always. Probably he did not record line after the change even though he seems to have this session. Therefore, when opens again, he returns to the old address of the home page. See you soon.

  Hi yuenct,

  You should take a look at the Knowledge Base How to set the home pagearticle.

  There are the steps in this article to reset your preferences on the default home page. I would try everything first to clear all strangeness. If it works, you can try to set your homepage again to your personal preferences.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• I want to load a new copy of firefox that does not add in all my old bookmarks and settings

  I gave my mom my old computer and create their own account for xmarks. Now I get bookmarks added to mine. I tried to load a new copy of firefox, but it keeps reloading all my old settings including bookmarks. I want to start all over again. He didn't there was nothing I could not redue easily.

  Create a new profile:
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• My toshiba satellite won't load my new battery, or former

  ORIGINAL TITLE: battery

  My toshiba satellite won't load my new battery, or the old, the icon shows activity concluded for a few seconds then it stops

  Hello

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• try and down load some new fonts and he repeats to me a virus deleted

  I can't download anything to my laptop trying to down load some new fonts and he continues saying a virus removed, ive done a scan of my laptop and no lie

  Hi CLARABONNICK,

  ·         What is the full error message?

  ·         From which site you download fonts?

  ·         This happens with everything you try to download from the Internet?

  It seems that the file you are trying to download can be containing the virus and because of that your antivirus is deleted.

  You can try disabling and temporarily change security settings software settings and check if you can download the file.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• Printing error after loading the new cartridge

  After loading a new cartridge (genuine) 338, everything I print has the top of the first line is missing. I rebooted the old cartridge and it prints the line correctly (even slightly). I tried to reload a new, but it still does not print correctly. The alignment test after loading was very good. Can anyone help me to solve the problem or is it just a faulty cartridge?

  Rich thanks for your help and for taking the time to answer my question. I'm sorry that I was not to give complete information about the printer, as this has been my first post - I'll do better next time. The issue has resolved itself today! After several attempts to print and reload the cartridge, I dropped, but unexpectedly, the printer has pulled up and began to do a second test of its own alignment, and that solved the problem.

  Sue20

• Compose a new VAPP via vCloud SDK

  I want to compose a new VAPP via vCloud SDK, but I got an error like below: can someone help me?

  April 9, 2015 13:56:53 com.vmware.vcloud.sdk.RestUtil post

  INFO: POST URL - https://vcdhttp/API/Admin/VDC/3bdc1c1b-DC30-479b-9ad8-071ee39a41cf/action/composeVApp

  April 9, 2015 13:56:53 com.vmware.vcloud.sdk.RestUtil post

  NEWS: POST Request Body - <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >

  " < ns6:ComposeVAppParams name ="NewTestvAPP"xmlns =" http://www.VMware.com/vCloud/versions "xmlns:ns6 =" http://www.VMware.com/vCloud/v1.5 "xmlns:ns5 =" http://schemas.dmtf.org/wbem/wscim/1/CIM-Schema/2/CIM_ResourceAllocationSettingData "xmlns:ns8 =" http://schemas.dmtf.org/OVF/Environment/1 "xmlns:ns7 =" http://www.VMware.com/Schema/OVF "xmlns:ns9 =" http://www.VMware.com/vCloud/extension/v1.5 "xmlns:ns2 =" http://schemas.dmtf.org/OVF/Envelope/1 "xmlns:ns4 =" http://schemas.dmtf.org/wbem/wscim/1/CIM-Schema/2/CIM_VirtualSystemSettingData "xmlns:ns3 =" http://schemas.dmtf.org/wbem/wscim/1/Common "> " "" "" ""

  " < href = ns6:VAppParent ' https://vcdhttp/API/Admin/VDC/3bdc1c1b-DC30-479b-9ad8-071ee39a41cf "name ="OrgVDC"type="application/vnd.vmware.admin.vdc+xml"/ > "

  < ns6:InstantiationParams >

  < LeaseSettingsSection ns2: required = "false" xmlns = "" xmlns:ns10 =" " http://www.VMware.com/vCloud/versions "> "

  < ns2:Info > lease settings < / ns2:Info >

  < ns6:Link rel = "├editer" / >

  < ns6:DeploymentLeaseInSeconds > 604800 < / ns6:DeploymentLeaseInSeconds >

  < ns6:StorageLeaseInSeconds > 2592000 < / ns6:StorageLeaseInSeconds >

  < ns6:StorageLeaseExpiration > 2015 - T 03-05-08: 32:16.473 + 00:04 < / ns6:StorageLeaseExpiration >

  < / LeaseSettingsSection >

  < / ns6:InstantiationParams >

  < ns6:AllEULAsAccepted > true < / ns6:AllEULAsAccepted >

  < / ns6:ComposeVAppParams >

  April 9, 2015 13:56:53 com.vmware.vcloud.sdk.RestUtil post

  INFO: POST Content Type application - application/vnd.vmware.vcloud.composeVAppParams+xml

  April 9, 2015 13:56:54 com.vmware.vcloud.sdk.RestUtil post

  INFO: Status - 404 Code

  April 9, 2015 13:56:54 com.vmware.vcloud.sdk.RestUtil post

  INFO: Status - not found

  April 9, 2015 13:56:54 com.vmware.vcloud.sdk.RestUtil post

  INFO: Request Id - X VMWARE VCLOUD REQUEST ID: 8f573dd9-7579-4520-8c95-038f00d934fe

  April 9, 2015 13:56:54 com.vmware.vcloud.sdk.RestUtil post

  INFO: Response - <? XML version = "1.0" encoding = "UTF-8"? >

  " < error xmlns =" http://www.VMware.com/vCloud/v1.5 "majorErrorCode ="404"message ="Resource not found"minorErrorCode ="RESOURCE_NOT_FOUND"stackTrace =" javax.ws.rs.ClientErrorException

  You are using an incorrect url. According to your info POST request you run against the "/ api/admin/vdc...» "url:

  NEWS: POST URL - https://vcdhttp/api/admin/vdc/3bdc1c1b-dc30-479b-9ad8-071ee39a41cf/action/composeVApp

  However, it should be "/ api/vdc /...» "(VMware vCloud Director 5.6 Documentation Centre)

• I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  Sure.

  Download it from

  Adobe - Lightroom: For Windows: Adobe Photoshop Lightroom 5.7.1

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1

  Install and enter your serial number.

• CS5 - trying to load a new .asl style file - get "error, because no file format or the parser cannot open the file."  What gives?

  try to load a new style for a project.  CS5 PSD.  the .asl file when you drag in the RFSO gives follows her "error, because no file format or the parser cannot open the file."  What gives?

  .asl files are layer styles

  You can go to the window > Styles, then load the styles in the drop-down Styles menu of the

  

• I cannot load the new 5.3 LR

  I cannot load the new 5.3 LR with the 1642 error msg?

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe_Lightroom_x64.msi_5.3 -----------  ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid. MSI Error message:  ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624  ------------------------------------------------------------------------------------- 

  Hi Blecho,

  You get the same results if you download the update 5.3 directly from here? Lightroom 5.3 now available:http://blogs.adobe.com/lightroomjournal/2013/12/lightroom-5-3-now-avai lable.html

  Let me know how it goes.

  See you soon

  LP

• How to stop Contribute CS5 adding a paragraph when you create a new page via "copy of the current page.

  When I create a new page via 'Copy of the current page', the new page always gets an additional line of code. Contribute CS5 adds a paragraph that pushes my browsing down in the content area of my site. Can someone please help me get to stop this?

  <!--

  Code on the original page:

  < body >

  < div id = "container" >

  < div id = "header" >

  < div class = "logo" > < a href = "/" > < / has > < / div > <! - end .logo - >

  < div class = "navigation" >

  Code on the new page:

  < body >

  < div id = "container" >

  < div id = "header" >

  < div class = "logo" > < a href = "/" > < / has > < / div > <! - end .logo - >

  < style p = "margin-top: 0;" margin-bottom: 0; ' > < / p >

  < div class = "navigation" >

  
  ->

  If you are going to administer websites > users and roles > choose > change role settings > Editing > paragraph spacing, you put a line or two lines?

  If a line, select the two lines.

• Too late to load the new SWF after unloading the current SWF file

  Hello

  In our application, we use more than 10 sovereign wealth funds. When you cross one SWF to others try to unload currently load SWF and load a new. We were successful to unload the existing SWF, but the problem, takes too long to load SWF again (more than 5 seconds). Please suggest a useful method to overcome this time for best performance.

  get an idea of the following code snippet.

  Thank you

  
  public void SwitchSWFs (): void

  {

  If (null! = SystemAgent.getInstance () .currentSWFLoader)

  {
  SystemAgent.getInstance ().currentSWFLoader.unload ();
  SystemAgent.getInstance () .currentSWFLoader = null;
  trace ("HomeUI: previous swf unloaded!");
  }
  on the other
  {

  }
  addChild (SystemAgent.getInstance (.swfLoaderSecondSWF));
  SystemAgent.getInstance () .currentSWFLoader = SystemAgent.getInstance () .swfLoaderSecondSWF;

  }

  
  will call by clicking a button
  public void LoadSecondSWF (): void

  {
  SystemAgent.getInstance (). swfLoaderSecondSWF.load (new URLRequest ("Second.SWF"));
  SwitchSWFs();

  }

  The delay is when you test locally?

  One thing you might try is to load all Chargers present you at the front they are needed so that there is more likely that they are ready to be added to the display list when it is called for.  So instead of having the button trigger loading the SWF, just it call the switchSWFs function.

  Another thing, you could try if you keep it where the Triggers button load the corresponding file to assign an event listener for the charger to detect when it has finished loading and then have this listener event handler function calls the switchSWFs function.  At least this way, the current swf file is not unloaded until a replacement is ready and waiting.