Load a palm via USB on my Toshiba Satellite

Similar Questions

• Envy 13: Ability to load Envy 13 via USB?

  Hello.

  I was wondering, is it possible to load my Envy13 via a USB 3.0 port?

  N ° Specter the most recent HP which is just now hitting the market the Skylake platform and includes 3 USB-C/Thunderbolt which is amazing and allows external monitors and recharges via the USB - C port, but previous technology does not.

• BlackBerry Smartphones loading very slowly via USB power supply laptop

  When I use the wall charger, my fine storm costs.

  But if I connect it with the sync cable to my laptop - laptop is turned on with the BB Desktop software running (and I can confirm that I have a backup of the BB Desktop software then the drivers seem to work), the storm is charging is very very very slowly or not at all.

  Is it supposed to load OK via USB to the laptop power?  How can I go on troubleshooting this?

  Your question is not a problem, but normal and the answer "why" is simple. Wall charger puts out simply more power that the USB port on your laptop needs to (or can). In general, any single USB port is 100-150mA (and can be lower if your running on batteries and the system is allowed to control the ports), while the wall charger is to switch off a little more (700mA)... constantly.

  Not to mention that when connected to the laptop there is communication that passes between the device and the computer, especially if you use the Desktop Manager, which makes peripheral 'work' and try to reload at the same time. Sometimes the ' workload ' can be greater than the rate of charge, so why he does not pay at all.

  IMHO, load your device with the supplied charger. Only use your computer to charge your device in case of emergency. If you insist on charging the system with your laptop... Plug in your laptop computer, close the Desktop Manager and Device Manager and it should load a bit faster.

• Is it possible to load my camera via usb cable?

  My camera canon t6i does not give good battery backup, so I buy the powerbank, is it possible to load my camera t6i Cannon by a usb cable?

  Lol no not guns.

• Can I load my MacBookPro via usb

  Can I reload my retina MacBookPro mid 2012, thanks to its ports usb 3.0 safely?

  Thank you

  N °

• I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this program and I know

  I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this progra

  It is a product obsolette, the server can activate it no more.

  You can use CS2 error: "Activation Server unavailable". CS2, Acrobat 7, Audition 3 downloads & serial number are given.

  Concerning

  Stéphane

• Toshiba Regza 46VL743G - playing files via USB stick

  Hello

  I have problems with playback music and videos via USB. I tried to format my USB for different file systems (ntfs, fat, ms - dos, for example) and video formats, but the screen is black, I launch the media player.

  My TV has played with MS-DOS Format the photos, but no mp3 or divx/avi files. I run the multimedia player with 'video' the led of the USB stick flashes, but after a few seconds the led turn off (I think that the stick loses power).
  My other TV (LG 55LE7510 55 '') plays all video files and mp3 without any problem (ntfs and video format *.avi)

  Someone has an idea?

  Hey,.

  Have you tried another USB key and the same thing happens with another USB key? Usually, you use the FAT32 format for your USB key. Then the TV will be able to recognize it and all the files it contains.

  According to the specifications of your TV supports jpeg files (USB and SD card), MP3 (USB) and video DivX SD (USB).

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• Satellite C650 - wouldn't boot via USB

  Long story, please bear with me

  A friend of a friend has a laptop Toshiba Satellite C650 she bought less new year with Windows 7 top and a few weeks ago, she had problems with a virus/spyware and paid somebody £40 who said they would sort it out with it. When it is revenue that he would just try to start XP and then the blue screen of death as XP tries to start. All attempts to communicate with the person who did this Fix has since then.

  Knowing that I have a Satellite and a reasonable knowledge of computers, my friend asked me if I could have a look and try and do a setup that would work for her and I agreed thinking along the lines of using my Vista Satellite, CD boot recovery disc, install Vista and then upgrade to Windows 7 by using the product key that she on his machine so enter the bios that I put it to start starting from the CD, insert the CD, turn on and off the drive, but he tried to load XP before the dreaded blue screen of death again :( Looks like that there is not drivers for the CD drive :(

  So I copy the files to an external hard drive that is empty I put the boot menu to boot from the USB key, plug the HD and turn on and instead of boot from the external drive, it still attempts to load XP before the blue screen again.

  I ve done the same with Hirems on the disk and once again the same thing, what it will do is try to load a version of XP from somewhere and then crush the dreaded :(blue screen

  Any ideas what can be the problem and how can I force it to load from my external hard drive so that I can do a format and reinstall?

  Which is higher
  Holmey

  Hey,.

  A little confused your assignment, you used another disk of your Toshiba laptop recovery, right? Well, if it s not the same mode, it will not work because each laptop model has its own installation of recovery with different drivers and tools. There is therefore no recovery disk that works for each laptop model.

  Best way to restore a clean Windows installation is for this model of laptop recovery disk. If you n t have it can be ordered directly from Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• How to import photos from an iOS device photos via USB?

  I import my photos of iPhone & iPad via USB for pictures on my Mac.

  I turned off the option to automatically open Photo when I plug my iPhone to Mac, because in most cases, I don't want to import Photos (for example just recharge the phone via the USB port).

  But now I can not get an option to import my photos.

  I read the help pages, but can't find the answer because it suggests options should open when the USB key is inserted, but the screen remains the same

  What should I do?

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S (command-option-S) key combination to make the sidebar visible on the Photos.
  • Click on the camera icon or an iPhone in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture? If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.

• RN104 freezes when you make significant transfers via USB 3.0 on 6.4.0

  My RN10400 works great since the purchase. However, I have never transferred via USB abundantly; all data have been loaded on the network. Now I have a lot of folders on a drive HARD USB 3.0 that I try to move to the NAS. When I try to copy on it will start at full speed and stays there for about five minutes. It seems then to have overloaded and from 100% to frozen in a fraction of a second. No no warning, no error, just insensitive and frozen. I tried the copy three times with the same result, and I have to remove the power to remit on the. There are no applications installed or running. 6.4.0 ordinary. Whenever I have pull the plug I need to Resync quickly the data on the volume, while this process is getting old.

  Any suggestions?

  Update: I've upgraded to 6.4.1RC and I still have the same question. A pull the plug to get back on the new =)

  Hello, @Learning2NAS

  In my case (erratic freezezs when writing large files on the disk).

  An upgrade to 6.4.1 RC1 + Factory reset (AKA factory reset under 6.4.1) solved the problem.

  As a test I did went back to 6.4.1 to 6.4.0 stable (what joke ;-)) and it froze again immediately.)

  If you're up to wipe your NAS, try a factroy restore 6.4.1 before attempting to downgrade.

  Please post the result of this, it would help many other contributors

• Play music while connected via USB?

  Is it possible to play music while connected via USB?

  It would be very useful for those of us who listen to music all day at work.

  Workaround/hax solutions will be appreciated.

  Hello britoso and welcome to the forum.

  The Clip cannot read music when it is connected and communicates with a computer USB port. If you want to keep the battery from flowing and still be able to listen to music, you will need to get a USB charger or try one of the methods described in these discussions:

  • Listen to your music while loading using PC
  • Player unit then only plugged into usb port

• Any way to load Vista on a new hard drive on a Toshiba Satellite with a broken cd player? Help!

  I dropped a laptop Toshiba Satellite A215 SS818 three year, upstairs. The hard drive and CD drive are damaged. I replaced the hard drive, and with the advice of a store of large surface, I bought an external pioneer CD/DVD reader/burner-usb 2. I think I need to download DirectX9 and install the latest drivers from device WHQL also, according to the requirements on the box.

  Duh - I realized, I can't use it to install the OS if the player needs software first downloaded to the laptop (didn't think it out while in a hurry in the middle of the store).

  Is it possible to get this OS installed via other external means?

  Thanks for any help.

  Hello

  that you plan to use the toshiba recovery media consults with toshiba

• How to activate the load on my laptop USB ports

  ON MY BRAND-NEW LAPTOP DAUGHTER WITH WINDOWS 7 (64-BIT), ASKED HIM TO YOU

  YOU WANT TO USE THIS USB PORT TO CHARGE THIS DEVICE. WELL SHE SAID NO AND NOW WHEN

  SHE SOUND IPAD BRANCH KNOW IT PAD DON'T SE NOT CHARGING. The SEAMS of the USB TO WORK

  FINE, EXCEPT IT DOESN'T LOAD ANY DEVICE PLUGED IN THERE. CAN TURN US THIS FEATURE ON?

  THANKS FOR THE HELP.

  MOTT HAVEN

  No Windows computer can recharge an iPad via USB connection.  Apple has created in this way.  Only some Apple computers can charge it via the USB connection.  All others must use an AC adapter.

• How to recover the administrator password in windows 7 via USB

  I have a HP netbook mini and need to how do to recover the administrator password in windows 7 via USB that we forgot and had to load itunes from another Iphone.

  Hello

  You can use a utility to reset as in the free sample on the link below - using another PC, this can be created on a usb flash drive.

  http://pogostick.NET/~PNH/ntpasswd/

  Kind regards

  DP - K