Envy 13: Ability to load Envy 13 via USB?

Similar Questions

• Load a palm via USB on my Toshiba Satellite

  I have a palm tungsten which is completely discharged with no power in the batteries. I can't turn on. I know that it is possible to charge via USB. I don't have a stand-alone charger for palm. I have a toshiba Palm usb cable connection.

  As my palm has no power, I don't then put it on the progress of load control. Also, I have not used my palm in a while so I don't know if it works.

  My question is, how do I know if my device is getting charge through my usb port on my toshiba satellite. When I plug the device via USB, I get a message saying that the unknown usb device.

  I don't know my model number. I have window Vista Home Basic on the machine.

  Any help will be appreciated

  > My question is, how do I know if my device is getting charge through my usb port on my toshiba satellite. > When I plug the device via USB, I get a message saying that the unknown usb device.

  I m not PAL no owner so I have no idea how the Palm that would indicate the State of charge but my U400 supports the sleep function & load and I could recharge my PS3 controller using one of the USB ports, which takes in charge the USB sleep & fresh

  The Device Manager didn t show a connected controllers, but the PS3 controller has been loaded correctly

  Welcome them

• BlackBerry Smartphones loading very slowly via USB power supply laptop

  When I use the wall charger, my fine storm costs.

  But if I connect it with the sync cable to my laptop - laptop is turned on with the BB Desktop software running (and I can confirm that I have a backup of the BB Desktop software then the drivers seem to work), the storm is charging is very very very slowly or not at all.

  Is it supposed to load OK via USB to the laptop power?  How can I go on troubleshooting this?

  Your question is not a problem, but normal and the answer "why" is simple. Wall charger puts out simply more power that the USB port on your laptop needs to (or can). In general, any single USB port is 100-150mA (and can be lower if your running on batteries and the system is allowed to control the ports), while the wall charger is to switch off a little more (700mA)... constantly.

  Not to mention that when connected to the laptop there is communication that passes between the device and the computer, especially if you use the Desktop Manager, which makes peripheral 'work' and try to reload at the same time. Sometimes the ' workload ' can be greater than the rate of charge, so why he does not pay at all.

  IMHO, load your device with the supplied charger. Only use your computer to charge your device in case of emergency. If you insist on charging the system with your laptop... Plug in your laptop computer, close the Desktop Manager and Device Manager and it should load a bit faster.

• Envy 4520: Envy 4520 via USB

  I just bought the 4520 envy. I did not put in place, but I need an extension cord. So far, I want to familiarize myself with it. I intend to use the connection of the USB cable, I bought. But I don't see the USB port of the printer.  Where he's hiding?

  I would like to use the wifi but mine disconnects every 30 minutes.

  It is in the back on the right, next to the power connector. However you must have a printer USB cable.

  Like this.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1451790205&SR=8-1&keywords=printer+USB

• Is it possible to load my camera via usb cable?

  My camera canon t6i does not give good battery backup, so I buy the powerbank, is it possible to load my camera t6i Cannon by a usb cable?

  Lol no not guns.

• Can I load my MacBookPro via usb

  Can I reload my retina MacBookPro mid 2012, thanks to its ports usb 3.0 safely?

  Thank you

  N °

• Ability to control LabVIEW VIs, via a standard Web browser

  Ability to control LabVIEW VIs, via a standard Web browser?

  Do you know where I can get information on this operation?

  I want to be able to control Labview Vis through the web.

  Have you tried the manual? That's where.

• I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this program and I know

  I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this progra

  It is a product obsolette, the server can activate it no more.

  You can use CS2 error: "Activation Server unavailable". CS2, Acrobat 7, Audition 3 downloads & serial number are given.

  Concerning

  Stéphane

• Machines of VM Workstation 6.5.1 - ability to load 64 - bit guest OS on the host running 32-bit OS

  I read that VirtualBox 2.1 supports this feature. With supported 64-bit processor, is VM Workstation 6.5.1 has the ability to load the 64-bit operating systems on the host machines running 32-bit operating systems?

  Check out this post: http://communities.vmware.com/thread/180031

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• How to import photos from an iOS device photos via USB?

  I import my photos of iPhone & iPad via USB for pictures on my Mac.

  I turned off the option to automatically open Photo when I plug my iPhone to Mac, because in most cases, I don't want to import Photos (for example just recharge the phone via the USB port).

  But now I can not get an option to import my photos.

  I read the help pages, but can't find the answer because it suggests options should open when the USB key is inserted, but the screen remains the same

  What should I do?

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S (command-option-S) key combination to make the sidebar visible on the Photos.
  • Click on the camera icon or an iPhone in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture? If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.

• RN104 freezes when you make significant transfers via USB 3.0 on 6.4.0

  My RN10400 works great since the purchase. However, I have never transferred via USB abundantly; all data have been loaded on the network. Now I have a lot of folders on a drive HARD USB 3.0 that I try to move to the NAS. When I try to copy on it will start at full speed and stays there for about five minutes. It seems then to have overloaded and from 100% to frozen in a fraction of a second. No no warning, no error, just insensitive and frozen. I tried the copy three times with the same result, and I have to remove the power to remit on the. There are no applications installed or running. 6.4.0 ordinary. Whenever I have pull the plug I need to Resync quickly the data on the volume, while this process is getting old.

  Any suggestions?

  Update: I've upgraded to 6.4.1RC and I still have the same question. A pull the plug to get back on the new =)

  Hello, @Learning2NAS

  In my case (erratic freezezs when writing large files on the disk).

  An upgrade to 6.4.1 RC1 + Factory reset (AKA factory reset under 6.4.1) solved the problem.

  As a test I did went back to 6.4.1 to 6.4.0 stable (what joke ;-)) and it froze again immediately.)

  If you're up to wipe your NAS, try a factroy restore 6.4.1 before attempting to downgrade.

  Please post the result of this, it would help many other contributors

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Play music while connected via USB?

  Is it possible to play music while connected via USB?

  It would be very useful for those of us who listen to music all day at work.

  Workaround/hax solutions will be appreciated.

  Hello britoso and welcome to the forum.

  The Clip cannot read music when it is connected and communicates with a computer USB port. If you want to keep the battery from flowing and still be able to listen to music, you will need to get a USB charger or try one of the methods described in these discussions:

  • Listen to your music while loading using PC
  • Player unit then only plugged into usb port

• How to activate the load on my laptop USB ports

  ON MY BRAND-NEW LAPTOP DAUGHTER WITH WINDOWS 7 (64-BIT), ASKED HIM TO YOU

  YOU WANT TO USE THIS USB PORT TO CHARGE THIS DEVICE. WELL SHE SAID NO AND NOW WHEN

  SHE SOUND IPAD BRANCH KNOW IT PAD DON'T SE NOT CHARGING. The SEAMS of the USB TO WORK

  FINE, EXCEPT IT DOESN'T LOAD ANY DEVICE PLUGED IN THERE. CAN TURN US THIS FEATURE ON?

  THANKS FOR THE HELP.

  MOTT HAVEN

  No Windows computer can recharge an iPad via USB connection.  Apple has created in this way.  Only some Apple computers can charge it via the USB connection.  All others must use an AC adapter.