Load/CPU Distributed System Manager

Hi all

I just finished real-time 1 training where I learned about the Distributed System Manager.  Then, I deployed a project Veristand and watched.  For me, what I see, it's disturbing, but I'd appreciate your opinions.  While watching the processors, they seem to be occasionally exchange of charges autour.  Veristand project should be "slowed down" meaning that the HIL is not yet turned on, if the PXI chassis should be executed (2) models and custom devices (6) in a stable condition.  There is a good chance that all 6 custom devices work call loops (that I just learned is not recommended).  Also there are moments where two of the proccessors slowly seem to swap loads (in the attached zip) rather than the wobbly behavior below.  Any ideas?  Is - this inidicative of an unhealthy system definition?

CPU scheduling is an interesting topic, and although deliberately threads to different processors can affect the determinism of a system, RTO Scheduler can and will move threads to different processors at different times. Moral of the story, what you're seeing should and fine as long as the use of a processor not individual rail.

Now, if you want more control, VeriStand gives you the ability to control where to run most things. You specifically mention templates and custom devices:

Models - you can specify, on a per model basis, what basis they run on. See "Processor" command on the model configuration page.

Personalized custom - Inline peripheral devices will be running on the same core as the PCL; Custom asynchronous devices (which I'm assuming yours are because they use call loops) will run on what basis you say them.

Tags: NI Products

Similar Questions

  • Sharing network Variable not in Distributed System Manager

    I have experience with LocalHost.   I have 2 computers A, B.  A, I can read a created/static SNV of B.  However, I need to use a SNV on A to A (I don't know why, I inherited this project and it is not at all commented).  So I create and I see it on my drive D:\\.  However, when I go to NI DIstributed System Manager, there are no library under localhost.  So I write in a VI and call it in another, and I get "DataSocketRead in VI" with the code 56.  Don't know why I can't have it is the Manager.

    I have attached ahev the library in case something wrong here.

    Have you deployed and right click the shared variable library?

    If it's an executable in the bulder properties you should check to deploy shared variables.

  • Alias of IOV Distributed System Manager

    Is it possible to see the IOV alias name and the name of the physical channel

    a cRIO channel?  The Project Explorer displays cRIO channels in this way and

    would be nice if the DSM would do that also.  Otherwise if you track down

    a bad transducer on a high lane count module, you will need to list the

    channels in your head.

    One possibility is to look into the following file stored on the cRIO system and extract the information from there.

    C:\NI-RT/config/variables. XML

    This file contains simple XML code, listing all the IOVs in the current configuration of the cRIO system.

    The attached sample project shows how you can read and analyze the information directly on the cRIO system. Of course, you can also copy (FTP) this file to the host and analyzed it.

    Note: Scan Engine Channel Info Plus.vi included in the sample, download its own bitstream on the FPGA to determine which modules of series C are located in the cRIO chassis. So this VI cancels and replaces any current FPGA VI running on the cRIO chassis. Use this VI cautiously because it can cause serious problem in your application due to the interruption of the FPGA.

    This example uses the reference for the CRY component library to retrieve information about cRIO current of the system hardware.

  • Manager of distributed system 2011 messed up after that 2012 installed

    So, as usual, things break when you install the new version of LabVIEW. I had not yet installed the new drivers, but the new version of MAX has been installed on my computer (it is wrapped in LV install now, rather than with the drivers?). Anyway, I went and opened the 2011 Distributed System Manager and I can't see what follows (Manager of distributed system of 2011 is at the front, 2012 in the back).

    http://digital.NI.com/public.nsf/allkb/06B37C3CD0710E5F8625787F0012353E Thanks to my colleague, who has had this problem before.

  • Real-time System Manager

    Hello world

    How can I open real-time System Manager to monitor on my project of myRIO resourses?

    I've already activated the VI server on the target.

    If I select Tools-> real-time Module I find only "Project Wizard", "set up Time-triggered network" and "viewer of Trace".

    Thank you in advance,

    Lorenzo

    The "Distributed System Manager" is an application/executable separated - you can find it, if installed, on the start menu under the folder "National Instruments". If it is not there, then you probably have installed as part of your installation - raise your LV Installer and choose to install.

    Alternatively, you can use the System Configuration API to read the various parameters (e.g. CPU / memory) on the target itself to monitoring the health of the system.

  • HP connection manager exe. Could not load the Assembly system.data, Version = 1.0.61.0, culture = SQ Lite...

    have new laptop dv7 and continue to receive the window... HP connection manager exe.

    "Cannot load the Assembly system.data, SQ Lite, Version is 1.0.61.0, culture = neutrral, db937bc2d44ff139 = public key token.

    The application will now exit.

    Please identify your laptop / pc

    Look at the basic/back/side of the pc/laptop to the sticker with barcode.

    Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

    #Do not post not the serial number of your product because it is private and considered to be personal information. ###

    Display the version of the operating system installed (State whether 32 or 64 bit) and the processor as one product AMD or Intel

    Not showing information as requested could delay our responses and troubleshooting slow the question that led you to create a thread. We want to help you, so please help us help you.

    Have you gone to your laptop's web support portal and tried the HP software box software?

    This would certainly be a good starting point.

    Removing and reinstalling the software HP Connection manager is also a good plan. It is also located on the web portal of support for your laptop.

    Best regards

    ERICO

  • On the DPM (Distributed Power Management) in VMware vSphere

    Dear Sir.

    As the description below URL.

    http://www.VMware.com/files/PDF/drs_datasheet.PDF

    Could you explain how DPM works on the server?

    I want to say how does VMware ESX control the power consumption of the server?

    Kind regards

    Charles

    Charles,

    DPM does not resemble the power consumption of an ESX Server, but it leans on the CPU load and memory. "VMware Distributed Power Management (DPM) continually optimizes energy consumption in the data center. When virtual machines in a DRS cluster need less resources, such that during the nights and weekends, DPM consolidated on fewer servers and the rest goes off to reduce energy consumption, the workloads. When VM resource needs increase (for example when users log in applications in the morning), DPM brings guests powered down online to ensure service levels are met. "For more information, see VMware vSphere VMware Distributed Resource Scheduler (DRS) .

    Robert

  • cannot access windows in safe mode because the keyboard is disabled until windows is loaded into the system

    I installed a keyboard wrong driver and now my winxp support with virtually no feature mouse or the keyboard, both frozen. I can't even load windows in SafeMode to solve my problem of driver, because my keyboard lights up until windows is completely loaded into the system. And it was actually a plu problem that I don't take care off the coast in time... Now, I was struck with a bigger question. Any suggestions from anyone, I appreciate it, thanks.

    I have windows xp pro sp3

    Can enter you the BIOS setup? I remember that my system has recognized a key led even with disabled USB legacy support. Then you can activate the support legacy USB in the BIOS. In time, you have to press F8 for safe mode there is normally no active driver at all, everything is managed by the BIOS. Another possible solution would be using a PS/2 keyboard...

  • file: \windows\system32\drivers\sptd.sys status: 0 x 0000001 Info: windows failed to load because a system critics driveris missing or corrupt.

    Good evening

    Windows no longer starts.

    at startup, it tells me:
    Windows Boot Manager
     
    file: \windows\system32\drivers\sptd.sys
         
    status: 0 x 0000001
     
    Info: windows could not load because a system critics driveris missing or corrupt.
    PS: my pc is an Acer aspire 7738G and vista under works

    French

    Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:

    http://support.Microsoft.com/common/international.aspx

    Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:

    http://support.Microsoft.com/common/international.aspx

    Thank you.

  • Help! Windows cannot load a critical system driver is missing or damaged.

    Hello

    I really hope that someone can help me! I've read through dozens of discussions without results. The laptop I use for establishing the budget, research and games has Windows Vista.  I was downloading of test (probably too at the time) and my system crashed.  I do not have the installation disk, or pre-installed her "takeover of marketing", did the thing F8 nothing helps and I can't afford to lose any files.

    I get absolutely no where but back to screen Windows Boot Manager telling me that Windows was able to start.  The following information is referenced:

    \Windows\system32\drivers\acpi.sys

    Status: 0xc00000e9

    Info: Windows didn't load a critical system driver is missing or damaged.

    Thank you!

    MsCameron

    Hello

    Via F8 safe mode is not an option for you, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Saving your files:

    You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

    Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

    http://Knoppix.NET/

    See you soon.

  • On HP Pavilion laptop computer on Vista do "Windows failed to load because the system registry file is missing or damaged."

    I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged.  then he said that I could insert the windows installation disc, I did not.  Thank you.

    Original title: a registry file

    Hello

    See if that helps you.

    Do a Safe Mode system restore to before the problem started.

    http://bertk.MVPs.org/html/restoresysv.html

    How to access Safe Mode

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If it doesn't work, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If the above does not solve your problem, it's the Information from HP to solve problems with their computers, including the reinstallation of the operating system by pressing F11 at startup.

    "Recover Windows Vista operating system using HP Recovery"

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#MicrosoftRestore

    For the HP Recovery Manager.

    The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:

    See you soon.

  • Satellite A300-288 does not load the operating system

    Hello everyone.

    Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

    Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

    Thank you very much for your help.

    Start your laptop with F8 and test if you can start the operating system in safe mode.

  • the specified virtual machine is currently not runing ID no: c1034a70 exchange System Manager

    I get this error when I want to mount the store point
    in exchange server 2003

    the specified virtual machine is currently not runing ID no: c1034a70 exchange System Manager

    Labor exchange in cluster

    Hi Mohamed Essa,

    The question you posted would be better suited in the Forums of Exchange Server. I would recommend posting your query in the TechNet Forums.

    TechNet (Exchange Server) Forum

    http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

    I hope this helps.

  • 0xC0000221 error windows didn't load a critical system driver is missing or corrupt.

    Hey, I got a letter on my laptop to install service pack 2 for windows vista and I did it with no complications until I reset my laptop and when it came back I received an error:

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "repair your computer."

    If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

    File: \Windows\System32\drivers\ecache.sys
    Status: 0xc0000221
    Info: Windows could not load a critical system driver is missing or corrupt.

    I followed these instructions several times and made repairs to start ending telling me that "Windows cannot repair this problem automatically" and "If you recently set a device to this computer, like a camera or portable music player, remove it and then restart your computer." I have nothing connected to the computer.

    I also tried to restore the system that is not no matter how far back that I try to restore to.

    Take your laptop computer to a local computer repair shop, reputable and independent.

  • Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

    Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

    Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

    I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

    First thing I did was a fast hard drive test and it happened.

    I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

    Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

    I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

    Thanks Bill

    Hello:

    See if you make your own plain W8 x 64 installation media works for you...

    Download the ISO W8...

    https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

    Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

    http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

    If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

Maybe you are looking for

  • Locking the exposure

    Hello. I was just curious - is it possible to do a locking the exposure for the T3i when you work in manual mode? Or it works only in shutter/aperture priority? Thank you in advance!

  • Restore failed - error code = 0 x 241

    I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the thir

  • Number with gestures. Am I missing something?

    Hi all, I was experimenting with the sample of gestures of https://github.com/blackberry/NDK-Samples/tree/ndk2/Gesture ... I wanted to do something when a tap gesture were found (some processing and registration for the file...)... I noticed that aft

  • Cannot connect to Windows Live or Hotmail

    I get a message pop up at the beginning of a session that there was a problem that caused some parts of the Windows Live ID Sign - in Assistant must be turned off. The binding specified for more information, the http://go.micosoft.com/fwlink/?LinkId=

  • Newbie question - clicking on a button

    I've been intercept the button clicks with navigationClick as part of a buttonField function.  But I see the examples of the API and other people use FieldChangeListener instead.  I suppose that FieldChangeListener will give me different States (down