Load my Apple Watch

Similar Questions

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• How long does take to load the Apple Watch?

  Before you buy the Apple Watch, I would like to know how long it takes to load completely.

  See: http://www.apple.com/watch/battery.html

  Charge time

  About 1.5 hours to 80%

  About 2.5 hours to 100%

  Testing conducted by Apple in March 2015 using pre-production Apple Watch and software associated with an iPhone using the pre-production software. Load times are from 0% to 80% and 0% to 100% using the MagSafe inductive charger included. Charging time varies depending on environmental factors; actual results will differ.

  You can restart the watch earlier after the charge, if the battery is not fully charged.  Restart requires at least 10% reserve battery.

  https://help.Apple.com/watch/#/apd2b717523a

• Load the Apple Watch

  Hello:

  I just bought a Apple Watch.  I have it plugged into the port of wall and I was curious the way whose time it takes to load completely before being used?

  Thanks in advance.

  A couple of hours.

• Problem loading Apple Watch sport

  Hello everyone

  Since last week (after update watch OS) do not charge my Apple Watch sport

  more than a minute...

  After a minute, I get an error message saying that 'charge with. "

  This accessory is not supported"even I use the original White

  Magnetic charger and I've never had such an error before.

  I tried to disable the twinning and restart the watch it dosent help

  any suggestions?

  Thank you

  Hello

  Try charging your watch once again. In doing so, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it. If you use one of these accessories, try to load the watch by plugging it directly into the charging cable, without using the.
  • If possible, test using a different Apple genuine magnetic Charging Cable (for example, by borrowing one from a friend).
  • If you reload your watch by plugging the cable into the socket:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Check that the USB power adapter is fully committed in the socket.
    • Try to use different maps of the following:
      • Adapter USB Apple that was provided with the watch, or;
      • A 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try using a different take (one that is known to work properly).
  • If no other suitable adapters are available, try to load by plugging the cable into a USB port.
    • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).

  If you identify a problem with a particular component (adapter, cable, or watch) or the question otherwise persists, contact Apple support (mail service may be available) or make a Genius Bar reservation to have your products verified and, if recommended by Apple, served (either under warranty or through a service fee and out-of-warranty):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com/

  More information:

  Check your battery and load your Apple Watch - Apple Support

  If your Apple Watch does not load, or it lights - Apple supports

• Apple Watch stuck on the load screen

  My watch was almost dead when I put it on the charger, I checked on this shortly after and now it just displays the red indicator (red Flash) and next to the load time. Completely insensitive to everything I do and yes I tried a hard rese, the problem persists. Try to empty the battery and recharge. This to see if anyone else has had this problem and if there is no solutio announcement, thank you.

  Hello

  Your watch is entered mode of power reserve. This happens automatically when the battery reaches a low battery level.

  What you can do for now is to tell the time (by pressing once the button). This is designed to keep this function available as long as possible, until you can recharge the watch again.

  To turn back on your watch: press and hold the side button until you see the Apple logo and wait for your watch to restart.

  However, you need to charge your watch for a little longer first. Try to recharge for at least 2.5 hours, following the instructions here:

  • Check your battery and load your Apple Watch - Apple Support

  More information:

  With the help of power reserve - Apple Support

• Apple Watch died after the load.

  My Apple Watch does not work after charging.  Nothing comes on the screen.

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch again for about 2.5 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If necessary, then try force it restarts again.

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• My Apple Watch has a black screen and will not load.  I have it odd, but I can't seem to pair again.  Any ideas?

  My Apple Watch appears to be dead.  The watch screen is black.  I have not matched the watch and we tried pair again, but the iPhone doesn't seem to acknowledge that she and I can't manually pair either.  Any ideas on what's going on?

  Charge the watch first. Instructions here > check your battery and load your Apple Watch - Apple Support

  If necessary, restart the Apple Watch.

  You should force reboot your device as a last resort, and only if it does not. To force the restart your Apple Watch, press in and hold the side button and the digital Crown for at least 10 seconds, and then release both buttons when you see the Apple logo.

  Try the assistance provided in this support article > If your Apple Watch does not load, or it will not turn on - Apple Support

  And here > set up your Apple Watch - Apple Support

  Apple Watch user's Guide will be useful > https://help.apple.com/watch/

• Apple Watch do not load to turn on

  Hello everyone.

  I just got my new Apple Watch sport this morning in the mail today on amazon. Once I unpacked the watch he immediately alerted saying me: it must be charged. I put it on its charger and hours later his watch still green screw saying his charge but it won't turn on and allow me to install. Once I removed the watch it the Red bolt appears and says I should keep it loads. I tried to turn it on and it restart several times all throughout the day, but it will not stop saying that it needs to be charged. Any advice? Thank you.

  Hello

  As red symbol appears on your watch again after loading the load, you may have a defective cable, an adapter or watch. Before contacting Apple, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with a lint cloth and try again).
  • The Chief charge is directly aligned with the back of the watch, with the concave side / curve touch fully (some stands to watch or watch cases are likely to hinder this).
  • You use only the genuine magnetic Apple Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet, try using different maps of the following:
    • The real Apple USB Power Adapter that came with the watch, or;
    • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
    • Power adapter certified by Apple (MFi) third 5W or module of magnetic charge.
  • If loading via USB, make sure you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).

  In normal operation, load should take up to 2.5 hours for a full charge.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• New Apple Watch. Load and can't turn it on

  I bought a new Apple Watch and matching. After awhile, it runs from battery. He is already responsible for more than an hour and I can't turn it back on. What can I do?

  Hello

  As your Apple Watch failed to charge the battery, it leaves on the charger with the power connected for a total of at least 2.5 hours:

  Check your battery and load your Apple Watch - Apple Support

  After this time, remove the watch from the charger and try restarting: press and hold the side button until you see the Apple logo.

  If this does not work, try force restart: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

  If it restarts successfully, repeat the pairing:

  Set up your Apple Watch - Apple Support

• Apple Watch and pacemaker

  MY wife has a heart pacemaker fitted, will monitor the heart rate on the Apple Watch gives BPMonitor accurate a reading or it would be compromised because of the pacemaker interfearance?

  Hello

  Note that the important safety information in the current Apple Watch user's Guide include the following information:

  Device medical interference Apple Watch contains components and x-rays that emit electromagnetic fields. Apple Watch, some of the bands, the magnetic charge cable Apple Watch, the case of magnetic charge Apple Watch and the magnetic charging Dock Apple Watch contain magnets. These electromagnetic fields and magnets can interfere with defibrillators, heart pacemakers or other medical devices. Maintain a safe distance of separation between your medical device and Apple Watch, his tapes, magnetic charging cable Apple Watch, the case of magnetic charge Apple Watch and the magnetic charging Dock Apple Watch. Consult your doctor and the manufacturer of medical devices for information specific to your medical equipment. Stop using Apple Watch, his tapes, magnetic charging cable Apple Watch, the load magnetic Apple Watch and the magnetic charging Dock Apple Watch case if you suspect that they interfere with your pacemaker, defibrillator, or any other medical device.

  
  

  More information:

  https://help.Apple.com/watch/#/apdcf2ff54e9

• Apple Watch first Gen does not start

  Hi all.

  My first gen Watch just died yesterday. I tried the advice of Jonathan UK, I read the advice from Apple. No luck. Does anyone have another idea until I bring it...?

  Thank you

  Rikard

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  • Try restarting it (by pressing the side button until you see the Apple logo).
  • If necessary, then try force it restarts again.

  If the problem persists then, I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in order to have your watch checked and, if recommended by Apple, served (if under warranty, if it qualifies, or via paid repairs):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com

  More information:

  If your Apple Watch does not load, or it lights - Apple supports

• When I turn off my Apple Watch and then turn it on, the face of the watch I changed other randomly

  Every night I turn off the Apple Watch and the next morning turn it on. Recently it chages the Apple face a random and erase one had. I have restore the

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  Rather than spend your watch every night, you can find more convenient to charge your watch every night, from one day to the next.

  The watch cannot be overcharged, and the battery won't suffer harm of regular refills done every day. The load will automatically stop when the battery is fully charged and will start again if necessary due to the use of the current battery.

  Follow Apple's safety and handling instructions, and note also that:

  • It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.
  • It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

• "Snake error" - Apple Watch

  Help me! I have the error of snake on my Apple Watch

  Hello

  The symbol of a bolt load cable and lightning appears when your watch battery has a low battery level.

  Try charging your watch for at least 2.5 hours (and maybe longer, for example during the night).  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it. If you use one of these accessories, try to load the watch by plugging it directly into the charging cable, without using the.
  • If possible, test using a different Apple genuine magnetic Charging Cable (for example, by borrowing one from a friend).
  • If you reload your watch by plugging the cable into the socket:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Check that the USB power adapter is fully committed in the socket.
    • Try to use different maps of the following:
      • Adapter USB Apple that was provided with the watch, or;
      • A 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try using a different take (one that is known to work properly).
  • If no other suitable adapters are available, try to load by plugging the cable into a USB port.
    • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).

  After charging, if your watch has not already restarted automatically, remove the charger and:

  • Try restarting it (by pressing the side button until you see the Apple logo).
  • If necessary, then force try restarting: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If you identify a problem with a particular component (adapter, cable, or watch) or the question otherwise persists, contact Apple support (mail service may be available) or make a Genius Bar reservation to have your products verified and, if recommended by Apple, served (either under warranty or through a service fee and out-of-warranty):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com/

  More information:

  Check your battery and load your Apple Watch - Apple Support

  If your Apple Watch does not load, or it lights - Apple supports

• my Apple Watch sport does not turn!

  Hello

  I was listening to music with my iPhone and my Apple Watch was paired with my iPhone. When I went to see the time on my Apple Watch I pressed the button, but my screen did not show at a time. at first I thought that maybe it has turned off that's why I pressed on and hold the side button to turn it on. but it won't turn. It was 60% charged.

  could you please help me? How can I activate my Apple Watch?

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2.5 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If necessary, then try force it restarts again.

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support