Load of forms like "Empty" paths

Similar Questions

• Battery power... after I plug the charger on my laptop it will start loading but after like 10 seconds stops.what is it possible?

  I plug into the connection starts to load but after like 10 seconds it stops... the computer remains switched on with the charger but it does not load. What can be?

  Hello

  This should ask in answers - Forum Windows for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ======================

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  =================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  I hope this helps.

• How to load a form after checking the State of a record

  Dear friends,

  Application VB.net 2005

  Server: SQL Server 2005

  Table name: Tbl_Test

  FieldName: availability

  I use VB.net to develop a piece of software, the feature is just check one filed named "availability" and if the value is 'Yes' then load a form named frmStatus. I wrote the Code in FormLoad event but I would like to know how to write Code in a Module or in a class to load the form if the product of the value of the 'availability' = 'yes '.

  As it is an exe file regular to run every minute, I am facing a problem in which the cursor disappears for a while when the SQL statement, the execution to verify the status of availability in the SQL Server database.

  Please help me to solve the problems.

  Thank you.

  Hello

  The question you posted would be better suited to the MSDN Community. Check out the link and ask the question.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

• Run the code once when loading the form

  Hi guys,.

  I have a text field (TextField1), which fills with a value (1-100)

  During the initial loading of the form, this value will be the highest.

  When the user navigates around the shape, this number will change (lower than initial load)

  I have another text field (TextField2) on the form I want to keep the original value to the loading of the form.

  something like: TextField2.rawValue = TextField1.rawValue

  But any event that I put in it always updates TextField2 with TextField1 value (not does not run the code once when loading the form)

  Can someone tell how can I do this?

  If the form is loaded with the number 70 as a value in TextField1 - TextField2 has 70 as a value and maintains this value regardless of what TextField1 goes to...

  Thanks a lot for any help

  try putting in the TextField2 docReady event:

  $ = TextField1.rawValue

• How can I get rid of zero in a calculated field when the form is empty?

  I made a form that prompts the user to enter data for specific years.  At the top of the form, the user places in the current year, i.e. 2000.  Column copy this year here, the second column adds five years and the third column adds 10 years.  I managed to create a simple script for each of these columns (so that when 2000 came; columns a, b, and c appear as 2000, 2005 and 2010) but when the form is empty a zero appears in the first cell, a 5 appears in the second cell and a 10 appears in the third cell.  I want the completely empty form so as to not confuse the person when they begin to enter data.  How can I write a custom script to eliminate the numbers in calculated fields?

  I would use a script for calculating customized for each of these fields. Something like:

  Calculation for reference year script

  (function () {}

  Get the value of the WCPYear field

  var v = getField("WPCYear").valueAsString;

  Set the value of this field. The value empty if WCPYear is empty

  Event.Value = v? v : "";

  })();

  Calculation script for field goal 5 years

  (function () {}

  Get the value of the WCPYear field

  var v = getField("WPCYear").valueAsString;

  Set the value of this field. The value empty if WCPYear is empty

  Event.Value = v? +v + 5 : "";

  })();

  Calculation script for the 10-year target field

  (function () {}

  Get the value of the WCPYear field

  var v = getField("WPCYear").valueAsString;

  Set the value of this field. The value empty if WCPYear is empty

  Event.Value = v? + v + 10 : « » ;

  })();

• The cancellation of the 'file' dialog box and handle errors caused by the empty path that makes the DB connection

  Hi guys.

  I developed a VI that connects to the database reads the names of tables, columns of the selected table, etc. It works well as I want to.

  However, I have problem with identifying the UDL file with function of dialog 'file' use in a structure of the event that is triggered when the button 'Open' value is changed. It also works well, when I choose the UDL file, but the problem is when I cancel it and I get the error 43.

  I tried to deal with this problem with a "error handler" function to clear the error 43 but the next errors that are associated with the database conncetion appeared. The reason is, when file dialog is cancelled, an empty path passes by reference of connection and I can't start the while loop where are the key codes. I also used a box Structure connected to "Cancelled" with 'DB connection tool' in case of real and connection the reference connection for the while loop, but I get the same result.

  I want to apply for work as: start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Thanks a lot for your help in advance.

  Hi lman,.

  start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Some pseudocode, easy to implement:

  WHILE
  
    onevent(OPEN button)
      FileDialog
  
    IF file selected THEN
      open database
      do calculations
    ELSE
      do nothing
    ENDIF
  
  WEND
  

  What is your problem with the help of loops and structures of the case?

• See forms like Enterprise Manager sessions

  I have exactly the same question as a here:

  See forms like Enterprise Manager sessions

  But which has been archived so I can't answer. Basically, I want to find the client what IP associated with a given process frmweb on the server of Fusion Middleware running Oracle Forms. Others that audit EM, this can be done on the command line, or find this info in any file? I checked a lot of logs and / proc (I'm on Linux), ran lsof and various other commands. No permit.

  Solution:

  http://yong321.freeshell.org/oranotes/FormsServerSessionMonitor.txt

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• I can't find the forms in the paths of lable

  I've done several shapes with the pen tool, when I select once in a while I see each form in the paths of lable without problem, but when I select all forms nothing appear in the paths of lable. How can I export all roads at once? My draw is vectorized?

  Hello

  What version of photoshop are you using?

  Make layers of shape or path?

  You try to export all the paths using the file > export > traces to Illustrator?

• SQL * loader with forms

  I use oracle 10 g on windows 7 32-bit forms.
  
  I want to load the shape data of oracle to the oracle database.
  I wrote the following code on buttons when pressed to release button.
  
  declare
  Usid varchar2 (10): = get_application_property (username);
  pwd varchar2 (10): = get_application_property (password);
  DB varchar2 (10): = get_application_property (connect_string);
  v_ctl_file text_io.file_type;
  v_live_path varchar2 (1000): =:-';
  v_bat_file text_io.file_type;
  
  Start
  
  v_ctl_file: = text_io. FOPEN(v_live_path||) e test. CTL', 'w');
  text_io. Put_line (v_ctl_file, "LOAD DATA");
  TEXT_IO. Put_line (v_ctl_file, ' INFILE "'| v_live_path |) (' Data.csv "');
  TEXT_IO. Put_line (v_ctl_file, 'INTO TABLE test');
  TEXT_IO. Put_line (v_ctl_file, ' done by ',' ' possibly surrounded by fields "'" ');
  TEXT_IO. Put_line (v_ctl_file, '(id, nom, salaire) ");
  TEXT_IO. FCLOSE (v_ctl_file);
  
  v_bat_file: = text_io. FOPEN(v_live_path||) load_data.bat e', 'w');
  TEXT_IO. Put_line (v_bat_file, 'sqlldr userid =' | usid |) '/' || pwd | '@' || DB |
  * 'MISTAKES is 1000000 control =' |. v_live_path | "log test. CTL = ' | v_live_path | (' test.log'); *
  text_io. FCLOSE (v_bat_file);
  
  Host(v_live_path||) e load_data.bat');
  
  Exception when others then
  message(SQLERRM|| dbms_error_text);
  message(' ');
  end;
  
  
  Content of my control file is THEREFORE
  
  DOWNLOAD THE DATA
  INFILE 'D:\data.csv '.
  IN THE test TABLE
  completed by ',' optionally surrounded by fields ' "'"
  * (ID, Name, salary). *
  
  Content of batch file:
  sqlldr userid = SCOTT/TIGER@orcl ERROR = 1000000 control log D:\test.ctl = D:\test.log =
  
  
  But on my command prompt, I get the following message
  
  Is not recognized as internal or external command, executable prgram or SQLLDR command file. _
  
  Thank you

  Edit your file of commands like the following and see if it works

  SET ORACLE_HOME=C:\oracle\ptoduct\10.2.0\db_1
  SET PATH=%ORACLE_HOME%\bin;%PATH%
  sqlldr userid = SCOTT/TIGER@orcl ERRORS=1000000 control = D:\test.ctl log = D:\test.log
  

  See you soon,.

• 11 GR 2 forms and virtual path

  Hi, I can not make my virtual path on 11 GR 2 forms of work (development mode, version 11.1.2).

  I followed notes 1063043.1 on Metalink, but without success.

  My goal is to have a virtual path (http://localhost:7001/cloee_export/) mapped to a physical path (c:\cloee\export\).

  I add this on < oracle_home > \user_projects\domains\CassicDomain\deploymentplans\formsapp\11.1.2\plan.xml:

  	< variable >
  		< name > vd - c: / Slim/export < / name >
  		< value > c:/Slim/export < / value >
  	< / variable >

  	> assignment of variable <
  		< name > vd - c: / Slim/export < / name >
  		/WebLogic-Web-app/virtual-directory-mapping/[URL-pattern="cloee_export/*"]/local-path < xpath > < / xpath >
  	< / variable assignment >

  I charge forms app in Weblogic (notes 1063045.1), but I always get an error 404

  What I've done wrong?

  Thank you!

  Indeed, it is a completely different path... And I don't like, because each developer on our team to do this installation and configuration. It's tedious.

  Finally, I have another solution. I can add folder in /servers/AdminServer/tmp//war/ and it will be available whith URL / http://localhost:7001 / forms /

• How to configure we draw like the paths of the race, rather than the default of transparent traces?

  When I move a drawing creation using simple 1 black lines smooth to draw Adobe Illustrator CC, it is expanded or compound paths.  I want to be able to draw the image as a single path only (points in the middle of the race as opposed to control points on both sides of control shape with filling in the middle).  Is this possible?  Or is it possible to convert simple traced complex traces in Illustrator?

  Yes. Sue's right.

  With the help of Illustrator draw give you paths as the form of the task.  If you draw on the same layer, you'll find yourself with forms that are unique, but without the path to the Center.

  It does not appear that Adobe draw currently records the path of the finger/stylus, so any form you create in one movement appears as a single color.  (All by converting some isolated shots that are not recursive might be easy, strokes that create irregular shapes is not)

  OTOH, if you use something like Adobe's sketch, pouvez get you the paths, but in doing so, you can confiscate the brushes that you created in the application.  I have not sat down to figure out how to reproduce these brushes in Illustrator or Photoshop (easier).

  This is an Adobe Sketch illustration, sent to Illustrator and the embarrassing tildes I did to create.

  

  While you can open the path data by converting it, you can keep a double layer of your works of art first.  The conversion process will replace bitmaps by default brush strokes.

  

• Form of subtraction, paths and animation of scenario

  Hi, I have a question about the subtraction of the shape of arcs and animations
  
  I was animating an Arc of a circle to invisible as an analog clock moves using a bow and the timeline.
  
  I want to cut in the middle of the Arc / circle so I look more like a ring of a circle.
  
  So I looked in the subtraction of the shape and follow-up form subtraction Narayan Info found here http://blog.ngopal.com.np/2011/06/18/shapes-intersection-subtract-and-union-in-javafx-2-0/
  
  Thanks Narayan.
  
  My question is, once I have merged the CRA and the circle of subtraction in a path, is it still possible to animate the length property of the arc electric and reflected in the shape of the path?
  
  Thank you

  Do you have

  arc.setType(ArcType.OPEN);
  

  This should remove the line from the Center to both ends of the arc

• How to create a form of free paths using script?

  Hello

  I want to create a form in which I add multiple points

  I try to use GraphicLine, but it adds no way point in this

  var myGraphicLine = myPage.graphicLines.add ();

  myGraphicLine.paths.item (0).pathPoints.item (0) .anchor = [72, 72];

  myGraphicLine.paths.item (0).pathPoints.item (1) .anchor = [72, 144];

  myGraphicLine.paths.add ();

  myGraphicLine.paths.item (1).pathPoints.item (0) .anchor = [72, 144];

  myGraphicLine.paths.item (1).pathPoints.item (1) .anchor = [90, 100];

  myGraphicLine.paths.add ();

  myGraphicLine.paths.item (1).pathPoints.item (0) .anchor = [90, 100];

  myGraphicLine.paths.item (1).pathPoints.item (1) .anchor = [110, 144];

  myGraphicLine.paths.add ();

  myGraphicLine.paths.item (1).pathPoints.item (0) .anchor = [110, 144];

  myGraphicLine.paths.item (1).pathPoints.item (1) .anchor = [144, 72];

  I want to create a W shape using script type.

  How to create a form of type free paths (like those drawn with pencil or pen tools) using js?

  
  

  Thank you

  This is because you create separate ways. Create just a first, and then add all the pathpoints.

  Do not forget that all first path you create comes with free first 2 points, so just move these in the position as shown above. Then add the new points to the same path, rather than create new ones (lines #4, #8, and #12 in my example).

• Updated if the value of the form is empty?

  Is it possible to set a value of constant only if the value of this field is empty? My goal is to put a value down to net new contacts when the original lead source value is empty (trying to understand why this always happens).

  Thank you.

  Yes, you can add a hidden form field with a static value and using "Update Contacts - with form" stage computer, map the field to lead the original source with a Type of update if empty value "Update".