Loading differed in parts of stream multi task

Similar Questions

• Multi-task on Palm Pre does not work

  Hi all

  I was under the impression that it was possible on the Palm Pre multitasking.

  When I start a spring Radio channel and launch a different application of the radio channel stops - unfortunately.

  No idea what's wrong here? Of course, a radio app should be able to run in the background.

  Thank you!

  Sapag

  Hello Sapag and thanks for posting...

  When Sprint TV's request was written, the multi tasking was not enabled on the application itself.  This is partly by design.  Radio and video streaming strongly uses the battery.  In addition, the deployment of the device limited the amount of time developers had to tweek the current application for the Pre.  Remember, this is the first true multi-tasking OS for a mobile device.  As time passes, additional patches will be correct and/or add functionality to the device and apps built into the ROM.

  Thanks for the comments and keep the questions coming...

  Thank you

  Colapop

• Hotfit 2520235 "this self-extracting zip file is part of a multi-disc zip file."

  Anyone else had problems with the installation of hotfit 2520235? Here are the two error messages:

  "This self-extracting zip file is part of a multi-disc zip file.  Insert the last disk in the set.

  "An error has occurred all in uncompressing.  One or more files were not unzipped successfully.  The error code is 110. »

  Details of the fixes:

  For Windows 2008 R2 SP1
  The KB Article number: 2520235

  Language: All (Global)

  Platform: x 64

  Location: (http://hotfixv4.microsoft.com/Windows%207/Windows%20Server2008%20R2%20SP1/sp2/Fix355735/7600/free/429927_intl_x64_zip.exe)

  Thank you!

  Deb

  E-mail address is removed from the privacy *.

  Hello

  The question you posted would be better suited in the Forums of Windows Server. I would recommend posting your query in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en/winservergen/threads

  I hope that helps!

• Is it Possible to have 2 methods to load different run a lot in a typical Application of FDM?

  We run FDM Classic 11.1.2.3.00 with an ES11XG4-K adapter.  We have a request from FDM with 2 locations using the load method to replace. Is it possible have 2 slots have loads different methods; This is a have to use the Replace method and the other a fusion method run on a lot? If Yes, can someone guide me how to do it?

  Thank you

  See the classical FDM Administrator's Guide.  Batch loader files have a name format for specific file with the segment identifiers - starts ~ rental ~ Category ~ Period ~ LoadMethod.txt

  The tag of the Load method is a two-character segment.  The second character identifies the method load application target, for example "A" to append and 'R' to replace.  I think that's what you're looking for.

  See the Guide to the classical FDM administrator for more details.

• Startup and loading Different programs

  Computer is very slow at startup and constantly get different and various Windows error messages such as:

  1. Windows Media Player has stopped working.

  2. Windows Media Center Store Update Manager no longer works

  3 Kbd.exe stopped working and was closed

  4 search index has stopped working and was closed.

  5 Svchost, a few things of Protocol and other

  Here are some of the examples, I have seen many others.

  As I said, the computer became very slow to start once it arrives on the desk.   I ran registry cleaners, disk cleaners, defragmentation... etc, etc.  The loading of any program from the desktop is extremely slow, but once they charge they seem to work well, except when they are required to "load" other things.

  I'm not a computer expert, but I do ok with repair of problems on my PC and others.  This however, left me speechless.  It seems to be a problem with Windows programs by default and, possibly, a hard drive problem.  Any help would be appreciated, and if there is more information that anyone might need, I will be happy to provide it.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Failed to start HP G71 - ordered and used recovery DVD-1 0f 2 loads of DVD part way and stops

  Daughter in law laptop Specs:

  HP G71-329WM

  S/N [text removed for privacy] (on the 30 day warranty)

  NBR of product. - BD4QV-DFVWY

  Intel Celeron 900-4096 mb

  BIOS Version - F-10

  Problem appeared as start-up blocking, no error message, stops on the Logo Windows appears this active disk then all hard disk activity stops. Pass recovery of various keys F, no difference, no error message. Disk and memory diagnostic all race clean, no errors. Repluged CD/DVD drive several times.

  Second symptom. No system of F11 recovery, same symptom, stops after saying system with bar showing the progress of the complete charge of loading. The mouse works but crashes right there with no hard disk activity.

  Third Symtom. With the new Windows 7 recovery HP DVD, (just received) following their instructions in the HP support page, no difference, no error message. Loads a few minutes and activity HDD light goes off and this beautiful laptop he just sets with no activity other than the power of light and a white light blue screen with a swirl design in the upper right corner.

  I reorganized new recovery discs HP Windows 7 (two) in the hope that it is a defective recovery disc that is the problem. But without display of error messages and diagnostics memory and hard drive running OK I have my doubts if the new DVD will be different.

  In other words, I have exausted my knowledge and seeks suggestions and such to help me here. I should have stuck with IBM computers, but they sold to the Chinese for their PC stuff and I am doomed if I will give them my money.

  Thanks in advance...

  Papa Ray

  Hello

  This problem can sometimes be resolved by wiping the hard drive first, and then reinstalling the operating system.

  Download and install Killdisk on the link below.

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Shut down the PC, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive (f10) - ( make sure to include all partitions and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk, insert the bootable CD from HP that you created earlier, and restart the computer to boot from it. When you see the green check mark, remove the CD and insert your first HP recovery disk.  Then restart your PC to try the installation again.

  I hope this helps.

  Best wishes

  DP - K

• The Stimulus of the Table load and run in the stream or target RT via Ethernet?

  I need to re-read a CAN track with the high fidelity and sequencing of rapid fire. The PC operating system is in the way too much to be able to control this tight of the moment. It must be managed within the target in real time.

  Do the stimulus of the table the stimulus replay load data to the RT, and then run the target of RT, or don't work space running on the PC the data flow to the RT for execution? Streaming would be subject to delays of PC operating system and network transport times.

  Thanks in advance for your help.

  Table of stimulus data gets loaded completely in memory on the target of RT and are replayed from there. PC or network delays has no effect on reading as soon as it starts.

• Multitasking is not multi tasking

  I often find that I would like to talk to someone on the speaker while browsing the web. I can browse the Web, but as soon as I place or receive a call, the web browsing seems to grind to a halt. When I'm on a call, I can always choose the browser window, but it will not go to all the links, while the call is active. Once I have killed the phone call, I'm back in the business and can browse the web. It seems that multitasking isn't really "multi" after all, at least for the web and phone concurrency.

  Teledon

  The voice and data at the same time is the result of a carrier of CDMA of Sprint.  If you select a Wi - Fi connection, you'll be able to talk and surf/etc. at the same time.  Without it, however, voice will block some features.  This part has nothing to do with the Unit well.

• [BSOD] My PC crashed while multi-tasking DMP file Dump analysis required

  Hey everyone I need help trying to figure out why my computer freezes or faces BSOD...

  C:\Windows\Minidump\122514-14913-01.dmp

  Is recovered.

  Link to the dump is https://onedrive.live.com/redir?resid=4A2C6A8186FB95F9%21114

  I don't know how to analyze it but if someone can tell me what is needed to be useful

  ITZ

  This DMP has been altered and of little use.  It does not specify what related material but not that little material.  If you have other DMP files download them.  Meanwhile, I'd start by running a CPU stress test.

  Try this free stress test: http://www.mersenne.org/freesoft/

  
  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  This is called a BCC124 and is linked to the material

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".

  
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" install Windows re: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Why can't I load different options for RichCopy 4.0.217.0 files?

  Just today, I downloaded RichCopy 4.0.217.0
  It works but I can not load a file of different Options, I saved - that is, it only runs a set of directory/file selectiosn and will not let me choose another file, I've saved a few minutes earlier.

  Hello

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• How can I load different CSS rules according to the browser?

  Basically I have background images set in place and when the page is scrolled on a desktop computer, the images are locked in place that their holders scroll upward and down, so I have a very simple parallax effect going on. Problem is that when I view on mobile devices and especially Apple iPhone, iPad, or iPod, the background is fixed yet, but it's huge!

  To after my research, background-attachment: fixed rule that is what creates the effect of simple Parallax seems to destroy the background-size rule: cover, simple force the image to view full size.

  So what I think is, to see what browser uses the user and through PHP or Javascript have a separate css file load with the rule background-attachment: fixed if the user is on a laptop Desk/computer or hide if they are on an apple device. I can't understand how do however. Is this possible?

  I don't want to use media queries as they are about to be unusable for this instance based on the screen size of a part of the device that are now producing people like Apple.

  I just your thoughts and or possible examples that you may have encountered.

  Thank you.

  Mobile Detect - Lightweight PHP class for detecting mobile devices (including tablets)

  Nancy O.

• [ADF, JDev12.1.3.] Where I save the managed bean used by a fragment? Main stream unlimited task or btf?

  Hallo,

  I have a fragment for which I created a managed bean extended backingBean.

  My doubt is where I save this bean.

  In the main stream task without terminals? Or in the stubborn workflow in which the frament is used?

  Thank you

  Federico

  In the BTF where the fragment is used!

• Load different list webapp for mobile

  Hello world

  I'm doing a responsive mobile slider, and while the cursor I have is supposed to be sensitive, it does exactly what I want.

  So I do a webapp backup who fixed the issue, but now I'm having issues getting the list of webapp different to load according to the list what design it is displayed on.

  Something like that is what I am after.

  Then I would say use model = ' / path/file-{system_visitordeviceclass} ' on a web app.

• How to load different virtual machines with different network users?

  I have a class with a small network, Windows 2000 server with Active Directory and 30 workstations. During the student newspaper of day in different categories-topics.

  I would like that to a different VM to load at the newspaper, which is depends on the class to prevent access to the programs, they use students.

  The question is, is this a good idea and if so what is necessary to accomplish?

  I wasn't sure at this time where to post this, please redirect me if necessary.

  Thank you for your time.

  Welcome to the Forums - certainly - in fact, VMware has a new (renamed actually) product that allows you to manage virtual desktops called VMware View - check out http://www.vmware.com/products/view/ for more information including pricing-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Load the metadata and extract the metadata tasks EPMA hfm App not appearning

  Hello
  
  I have deployemed an application of hfm in EPMA.
  But the options load metadata and extract metadata does not appear under load task and extracted.
  Version of EPMA is 9.3.1.3.
  Is this a limitation with this version of EPMA or I made a mistake during the installation.
  The user has all privileges for this app.
  
  Help, please.

  Once you create an application in EPMA these options are no longer available.

  They are only available for Classic applications.

  See page 121 of the Administrator's guide.

  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/hfm_admin.PDF