loading on top of the other images: addChild - removeChild

Similar Questions

• Sovereign wealth funds, loading on top of the other

  This problem I have seems simple enough...  I can imagine how the code might work, but I don't know enough about actionscript yet to be able to know what to use.  I'm not sure how to look at stuff like that.

  The three buttons on the stage all the remote swf loading in the same place... Each successive button on which it is supposed to upload a film that takes the place of one that's currently here that is the problem, each click of a button simply loads it's under the existing film... so they just keep stacked above the other.  I need a way to get the code check if a movie is loaded and if so, unload this one first until it loads the current.  I have an 'if' could check the 'swfLoader' instance is fully charged, and then if that is the case, it could be to remove the child.  I know that there must be a better way to see if something is on the scene... Here's what I tried.  Could someone please put me directly?

  Thanks to you all.

  __________________________

  Stop();

  unit13_3br2ba.addEventListener (MouseEvent.CLICK, getUnitSWF);
  unit21_2bdStudy2ba.addEventListener (MouseEvent.CLICK, getUnitSWF);
  unit23_2bdStudy2ba.addEventListener (MouseEvent.CLICK, getUnitSWF);

  function getUnitSWF(e:MouseEvent):void
  {
  If (swfLoader.framesLoaded is swfLoader.totalFrames)
  {
  this.removeChild (swfLoader);
  var swfLoader:Loader = new Loader();
  swfLoader.x = 25;
  swfLoader.y = 368;
  swfLoader.load (new URLRequest ("units /" + e.currentTarget.name + ".swf"));
  this.addChild (swfLoader);
  }
  on the other
  {
  var swfLoader:Loader = new Loader();
  swfLoader.x = 25;
  swfLoader.y = 368;
  swfLoader.load (new URLRequest ("units /" + e.currentTarget.name + ".swf"));
  this.addChild (swfLoader);
  }
  }

  Move this: var swfLoader:Loader = new Loader();

  outside the service and they do not load on the other.  If you want to load on each other, you can set the depths.

  send to back

  setChildIndex(myMC,0);

  bring to front

  setChildIndex (myMC, numChildren - 1);

• Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.

  HI Timp,

  Sorry, but that kind of image manipulation is not for the purpose of Lightroom and more oriented toward Photoshop and retouching of composition of similar images.

  Please check the links to know the image overlay in Photoshop below:

  Mix photos with apply Image in Photoshop

  http://www.photoshopessentials.com/photo-effects/blend-photos/

  The superimposition of Images in Adobe Photoshop | DIY digital composition

  For more good result to check the google search.

  Google search: Google

  Concerning

  Sarika

• How to display all the other images in the image indicator

  Hi all

  I use IMAQ for capture and record high freq and images high resolution. I have an indicator of image directly from 'Image Grab acquire'. Thus, the indicator image displays images at very high frequency too. To display frames, but not necessarily all alone (enough so that the operator can see what's happening). So, I wonder how I can view, say all the other images (for example all the odd/even number of images), or jump on two and show the third?

  Any help will be appreciated!

  Thank you!

  Wenlong

  Here are some general observations.

  • Image acquisition is "a horse of a different color" - in contrast to many other I/o devices, the memory containing the data (here called the "buffer") is handled by the driver and is not directly available for LabVIEW.
  • I'm guessing that you are using hardware OR video, because you use the IMAQ functions (I used only IMAQdx).  Is this true?  What camera do you use?
  • The (probably) "Awakenings" IMAQ extraction buffer herself to the camera (I say 'probably' because I don't know the hardware you use).  This means that While the loop containing it will work at the rate of the camera images (so you can easily calculate the frame rate, as your example code).

  This looks like a routine NI Demo, so I think that you don't have much experience with the treatment of Vision.  If you have a lot of other LabVIEW experience, you should be able to make the leap to the vision, once you have the idea of the functioning of the buffers.  Unfortunately, there isn't much in the way of tutorials and white papers on Vision than on other subjects of LabVIEW.

  Yes to your question - how to view every Nth frame.  This is the loop key (which arises directly from your code):

  

  As menioned above, this routine is 'clocked' by the function of extraction buffer.  What you do to display each image is th is to place control of the Image inside something like a Case statement that "triggers" each nth time.

  Here is a version of 'Nth' of the loop above (details omitted)-

  

  We always roll the filling of each buffer with a frame loop.  But we then use the whole function divide to select the nth image (those who have a remainder of 0 when i is divided by n-th) and of the 'image' line (it does not really an image) for 'Image' control, with the other case being "Default" (for all the other Valentine go) and nothing inside.  Thus each nth time in this loop, the output of the extraction buffer is the wire to an Image (and displayed), the other N-1 times the thread is going nowhere.

  Bob Schor

• Printer prints the list of songs on top of the other, is at - he a segesstions?

  I have a printer inkjet wireless all-in-one of Dell-V725w: problem when I print a jewel cover in the list of songs in Itunes prints a song on top of the other, use print a list correctly, any segesstions anyone?

  Note that you posted on the comments forum, which only handles questions forum , not with issues related to products. A moderator can move the thread for you. In the future, you might try Windows http://answers.microsoft.com/en-us/windows/forum?tab=allforum.

• I would like to add a name above that too good image that match wii the other images, how can I do this?

  I would like to add a name above that too good image that match wii the other images, how can I do this?

  No, it's a photo,

  It looks like a collage of four photographs with some texts.

  If you do not have the texts as text layers, you must determine the fonts used, then you can create a text with additional text layer.

• How to format individual images in Dreamweaver CC without affecting all the other images used?

  Whenever I have format a picture, the change affects all the other images on the site. Is there a way to format a single image?

  Give it a unique ID (1 x per page) or the name of the reusable class in your CSS.  XXX corresponds to the value in pixels.

  CSS:

  ID

  IMG #ID {width: xxxpx}

  name of the reusable class

  IMG. className {width: xxxpx}

  HTML:

  

  or

  

  Nancy O.

• Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Inadvertently, I had a graduated filter changed all 326 images in my folder. How can I remove this change of images without affecting other types of changes, I did for the other images?

  Select all images, ensuring that you are in the develop module. Auto-Sync lights up and then just delete the graduated filter. You will need to activate the graduated filter tool and click on the PIN for the filter you have defined and then press the delete key. Then, you want to disable automatic synchronization. Now, just highlight the image you want to add the graduated filter and do your thing with her.

• Panoramic image with text and images at the top of the poster image

  I tried to create a characteristic panoramic image where there is text on the top of the image of the poster with a picture. Below the poster image is panning. The problem is the text and the image that I put on the top of the poster image, does not appear when you use the panoramic image. How can I get it work?

  The problem was the image should be a jpeg file, it was a tif

• How to display multiple windows next to each other on top of the other in the bottom task bar

  When I open a new Firefox window, he stacked it on top of all others in the taskbar at the bottom. I wish they were next to each other. He used to do this. Now, I have to hover over the element ONLY Firefox in the bottom task bar and read the list to find the one I want to go to. It is a waste of time and tedious.

  How can I change this?

  I think that this is governed by your general taskbar setting. Please see the screenshot joint. To get this dialog box, right-click an empty area of the taskbar, and then choose Properties.

• bring a field on top of the other

  How can I do this? I have 2 bitmapfields in a Manager. Depending on the option chosen by the user, I want a field to display above the other.

  On top?  Do you mean above on the screen (so the first bitmap is located closer to the title area), or do you mean that they are both in the same place on the screen.

  I suspect you want to see one or the other - in which case you can simply delete one and adds another in its place.

• Cursor with several cursors: how to keep a slider to go to top/below the other?

  Hello

  I have a slider control that has two sliders. I couldn't programatical stop one of the sliders to go beyond the other.

  Is there a simple way to stop a cursor having the other?

  Stephen

  Sounds like this - http://forums.ni.com/t5/LabVIEW/Limit-range-of-one-slider-to-the-other-slider-s-value-on-a-two/m-p/2...

• I have two disks, a load with Vista 64, the other Vista 32. Can I integrate the 32 in the 64?

  I would like, with a minimum of functions software loss as Nero, etc are my new old VIsta 32 part, instead, a 64 bits two order install. Any suggestions?

  N °

  They are 2 different operating systems.

  You cannot merge together.

  You can delete one or the other.

  See you soon.

  Mick Murphy - Microsoft partner

• E10 adding white space at the top of the footer image

  I tried to create an email that has a text box that is white in the Middle, surrounded by images on all 4 sides (which was an image, decided on). I have included the email below

  http://app.na.agcocorp.com/e/es.aspx?s=1524474208 & e = 697 & ELQ = 6d4fc785f9a74a2ab3c46566bfbb0908

  Anyway, no matter what I do, e-mail seems to add a 30? PX white space between images on both sides and the background image. Everything was aligned in Eloqua. I even tried to create a text box and use the following code for the background image:

  < table border = "0" cellpadding = "0" cellspacing = "0" >

  < tbody > < tr >

  < td > < img elqtitle = "" src =" " http://images.na.agcocorp.com/EloquaImages/clients/AGCOCorporation/ " {1ca5dc18-f6cd-4abe-a72d-23d0065e74c0} _PTS_FieldCheck_Footer.jpg" style = "display: block;" >

  < table > < /tr >

  < / tbody > < / table >

  Still having the same problem. It shows fine in Firefox/Chrome, but when actually sent via Outlook or Gmail, the white space appears

  Any ideas?

  Thank you!

  Hey Brandon,.

  Just before starting the maintag for your footer image you have anothertag that contains 3 empty columns)tags). All 3Tags have a height 60 attribute. In fact, if you go to your code and use browsers find function (usually Ctrl f) and type in id = "emtpy16" it takes you directly to the first of the 3Tags (i.e. id = 'emtpy16' id = 'emtpy17' id = 'emtpy18'). Delete this height and you should be good. Also, make sure that you reset your image in the style = "display: block;" or you will get space in gmail around your image.

• Photos of the other image files: psd, tga, dds, exr in Win Explorer and file?

  Is it a 3d solution of party to see the tuumbnails of image files exr directly inside boxes of open/save dialog and winexplorer, psd, tga, dds.
  One that works in Win 8 without fault?

  HI Kirk,

  Thanks for the post.

  Use your favorite search and research for the 3d part request, that helps you to see thumbnails of the psd, tga, dds, and directly exr image files inside Windows Explorer.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.