Vista can not read memory cards, please and get in shape.

Similar Questions

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Mac Pro can not read SD cards more

  Hello

  I need help with a strong issue with my Mac Pro, who can not read SD cards more. Gluing of any player on any USB, an SD card is not recognized more. Strange also when I put a CF card in the same drive, it works and I can see the CF card on my desk.

  Someone at - it a response?

  (Mac Pro 3.1, latest El Capitan, several players used, same problem)

  What do say to recognize?

  Finder?

  Disk utility?

  System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Have SD readers that you have linked?

  When it is connected with an SD card lists what System Profiler under USB?

  You should see the reader and the card.

• C55D-A-12N satellite can not read SD cards

  I got my Satellite for only a few months, and he was happily read the 8 GB SD card and then stopped.
  I bought a new 16 gb SD card, and it will not read either.

  I had cause to take the laptop to the factory settings and had a broken hard drive replaced.
  It does not read the card. I looked in the Device Manager, and he told me that the drivers are installed...

  . Can someone help please?

  Hello

  There's a reason simply why the SD card isn't recognized properly: the SD card isn't compatible.
  The Satellite C55D-A-12N card reader takes in charge the rest of media:

  8 MB to 2 GB SD
  SDHC 4 GB to 32 GB
  64 GB SDXC
  Mini 8 MB to 2 GB SD through adapter
  Micro SD 8 MB to 2 GB via adapter
  Any other MMC 4 MB more than 2 GB

  As you can see, the regular SD cards are supported by only the formats between 8 MB and 2 GB

• My Omni10 can not read sd cards

  The tablet can not read my sd card I tried 2 sd cards and still does not work. This after I updated my Windows. And sometimes due to the sd card my screen freeze and I have to disconnect my sd card in order to get works. I kinda want my Tablet factory reset. Anyone know how?

  @ richardgho: I agree, however, I do not work for HP, so I have no authority in the matter. Despite this, describing results from the troubleshooting steps you have already accomplished should demonstrate that your tablet is defective.

  If you are still in yout seller of trading period, which may be an easier option for you, instead of getting the HP Technical Support to approve a sectoral approach. Whatever it is, you've been sick, so I hope that you won't encounter any hassles even when organizing an Exchange.

  When you are satisfied that this issue is resolved, please indicate your message 'Resolved' to make it easier for others to learn what works for you.

  Good luck!

• photos on CD - R in Vista can not read in XP

  I burned the pictures for a total of 628 MB on a 700 MB CD - R using Vista of reading.  I used the system of active files and ISO image formats.  Nor will allow the CD - R to open on XP.  On Vista, it shows all the photos that have been copied.

  If I use the Live file format & copy only 20-25 photos on CD - R, CD opens on XP.

  Is it possible that I can avoid using so many CD to copy photos?  I'm not very known to the computer!

  I burned the pictures for a total of 628 MB on a 700 MB CD - R using Vista of reading.  I used the system of active files and ISO image formats.  Nor will allow the CD - R to open on XP.  On Vista, it shows all the photos that have been copied.

  If I use the Live file format & copy only 20-25 photos on CD - R, CD opens on XP.

  Is it possible that I can avoid using so many CD to copy photos?  I'm not very known to the computer!

  =============================================
  Perhaps you could use a memory card or a USB flash drive to transfer
  photos.

  If you insert your Vista created CD - R in the CD/DVD drive on your
  Machine XP and go to the... Start / my computer... can you right click the
  The drive letter of the drive and select Explorer? This lets it
  See the directory of the CD? Maybe you can copy and paste or drag and drop
  photos from there to a folder on your hard drive XP.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite can not read xD card

  Greetings. I have the following problem with reading xD card. Capacity is 512 MB and it is the series M. card I have no problem with playback of standard xD Picture card but my computer laptop doeasn can't just see me one. Do you have any idea what should I do? Y at - it an update of firmware for the memory bank?

  Hello

  Have you checked in manuals s what cards are taken in charge and what are the cards can be read?
  Sorry, but you didn t write which laptop model you have, and it is not possible to check what cards are supported.

  Good bye

• BlackBerry smartphones can not see memory card when connected to USB

  At the same time whe connected to the USB port I could choose 'My Computer' and see the memory card but cannot be.  I can't see also it when it is connected to the Desktop Manager.  The device is connected and sync, but I have you will not access the memory card.  The only change I've made lately lazy tent.  It worked fine for awhile, but I deleted the application to try to recognize the card memory again.  On the BB, I can see all the photos and music on the map, the only problem is when connecting to my laptop.  I put in mass storage mode.  Any ideas?

  Cool!
  I'm glad that you fixed it.
  Please solve the thread so that others can find your answer faster.
  Thank you

  Bifocals

• Torch of blackBerry Smartphones do not read memory cards

  I got my flashlight for a few months and I just swapped my SD card (8 gb) of my previous phone in the torch. There worked perfectly, but then I started getting constant in messages to say media card was inserted and then deleted; These would happen immediately after another until I lose patience and take it out.

  I have wiped the card, formatted, followed all the instructions on the forums how do I transfer media top correctly, but now the phone does not even recognize it. I assumed it was just a specific it as card caused hassel in the past, so I tried a few other SD cards and the phone is not recognizing any of them.

  I plan to send my flashlight for repair if I can not find a solution, but I would rather not send it away for 14 days if I can avoid it!

  All solutions anyone?

  Thank you!

  I had a similar problem before, I formatted on a PC and then formatted in the device

  then transferred all the backup after.

• I have Acrobat 10 and became error update messages that I've finally done what Adobe recommended and uninstalled Acrobat.  Now, I can not re-install the program and get a number of different error messages.  Help I need to read the pdf docs!

  I have Acrobat 10 (10.1.9) who came in the Creative Suite CS5.  I received many messages about updates failed so finally did what was recommended by Adobe and uninstalled the program.  Now I can not re - install.  Here are the error messages I receive.  Help!

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW065, DW066...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 3 (s), 2 warning (s)

  WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}

  WARNING: DW065: display the requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}

  -Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0.

  : Error 1328.Error applying the fix to the C:\Config.Msi\PTDB05.tmp file.  It has probably been updated by other means, and can no longer be modified by this patch.  For more information, contact your patch vendor.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: error 1328.Error application of the fix to the C:\Config.Msi\PTDB05.tmp file.  It has probably been updated by other means, and can no longer be modified by this patch.  For more information, contact your patch vendor.

  ERROR: DW050: payload following errors were found during the installation:

  ERROR: DW050:-Acrobat Professional: installation failed

  The installation must be done through the CS process, not a straight line installation and activation as a stand-alone product.

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• SD card reader is identified as a WPD file system Volume driver and can not read SD cards.

  HP Pavilion Elite-110f desktop PC

  Windows 7 64 bit

  In the Device Manager "this device cannot start."

  Temporarily used MiniTool Patition Wizard repartition my SD card out of my Android phone. When I noticed the problem, I uninstalled the program. Disk management Windows see the SD card; Ubuntu see the SD card; Yet he does not appear in 'computer '. So I can't transfer files.

  I reinstalled all the drivers card drivers mother AMD and Alcor USB 2.0. Question remains.

  Solved by assigning the drive letter in disk management

• HP G6-1247SA will not find my router and will not read memory cards

  Hi I just bought a HP G6 model 1247SA and it will find all networks and the habit of reading my SD card but it does not pick up USB. I think it might be because the drivers but how do I not know what drivers to download? It has windows 7 pro is installed and the Intel core i3, any help appreciated

  Hello Joeym90.

  Try this driver.

  I would like to know the result and have a great day.

• Equium A100-306: Vista does not read MMC cards - MMC1 device has no drivers

  Have installed all the drivers vista toshiba and my reading SD support page cards well.

  However, when I insert a MMC card Vista drivers but can't find. Said that peripheral MMC1 has no drivers.

  Help please

  Your Equium read MMC with XP card? If Yes, then I suggest you to reinstall your drivers and check if you have forgotten to download some drivers for download/install.

  Sometimes you can find the drivers that are not on the European website on the Canadian site of toshiba:

  http://209.167.114.38/support//download/ln_byModel.asp

  Hope that you will succeed. :)

  Welcome them

• Vista can not read CD or DVD after you connect USB/eSATA 1 TB external HARD drive

  Hello

  Can anyone help, I have had this problem since I connected an external hard drive. Vista cannot read drive, its visible in Device Manager, but has an error code 19.

  The drive works fine if I try a bootable CD/DVD.

  Have you tried the fixed charges:

  KB/314060

  KB/929461

  Kb939052

  Kb952951

  KB/316529

  GP/CD_DVD_Drive_Problems

  GP/hardware_Device_Problems

  Not that helped solve the problem.

  Would be to remove the old USB devices of assistance from the registry? How can I do this safely?

  Thank you

  Tim

  Hi Rob,

  Thanks for the son. HP do not have an update of the firmware.

  DevManView let me see all the devices that are installed.

  I disabled the device I think about the origin of the conflict, but which has not set a problem.

  I'll have to get the keys to void Current Control Set.

  Thanks for your help.

  Tim