MY iphone6 will not return from the icloud, HELP?
I had to replace my phone. The new phone will not render from the icloud. I tried several times and I even took it in the Apple store without success.
I had to replace my phone. The new phone will not render from the icloud. I tried several times and I even took it in the Apple store without success.
Thanks a lot for sharing that you cannot restore icloud.
Maybe include some details as to what happens when your restore IE. error message?
Or that said Apple store has been without success...
Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
Signature of the problem 1: 6.1.7600.16385
Signature of problem 2: 6.1.7600.16385
Signature of the problem 3: unknown
Signature of the 4:21200196 problem
Signature problem 5: auto failover
Signature of the problem 6:7
Signature of the 7 problem: bad driver
OS version: 6.1.7601.2.1.0.256.1
Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.
Any help would be appreciated. THX
Additional note: when you try to boot from a restore disc, blue screen, error message:
Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
It is a hardware failure that cannot be restarted soft.
I also removed the hard drive and RAM, reinstalled and rebooted, no change.
Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.
Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.
Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.
printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.
now, the does not print from the computer. Everything else works fine. (copy, scan, fax)
Internet works. Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print
Welcome to the HP forums!
I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!
How is the printer connected? Ethernet or USB?
In the meantime, please try our HP print and Scan Doctorand let me know what happens!
If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope to hear from you soon and thank you for posting!
I just installed Adobe Reader version 11. When I start to read a pdf file, it will not start on the page where I left off last.
I had version 10, and he would start on the page where I finally left (at the previous session).
Is there a way to get version 11 to do what would make my version 10?
For example, if I studied my Excel book and left to page 70, closed Adobe Reader, then recovery thereafter, Adobe Reader automatically start on page 70 (for the Excel book that I study since).
However, now with Adobe Reader version 11, it does begin at the front of the book pdf.
Is there a way to get version 11 to remember the page whatsoever when I close the book pdf?
Thank you very much
Edit > Preferences > Documents > open settings, select 'Restore last view settings... ". »
I try to install XP Home in my NB100
The netbook still refuses to boot from the XP CD. It's just not more
Returns the current operating system (Ubuntu) or give the error "Could not find NTLDR" dreaded.
And yet - it will boot from an Ubuntu Live CD disk perfectly fine, AND
If I connect this external hard drive on my computer Windows 7, (another Toshiba
Portable satellite) that the machine starts quite successfully since the XP CD
in the same external drive!
Can anyone throw any light on what is happening on Earth on?
There are various reasons why this error message:
In most cases this error because the laptop is trying to boot from a HARD drive or flash drive that is not configured correctly. Maybe the drive is not bootable or not compatible.
It would also be possible that some sectors on the HARD disk, HARD drive failures are corrupt or BIOS is damaged. NTLDR error messages may also appear if the master boot record is damaged.
In your case I recommend that you format the first HARD drive before booting from the hard drive CD7DVD external using Win XP CD.
By the way: you must add SATA driver to CD Win XP using nLite.
The SATA driver is placed on the European driver Toshiba page in the Intel Storage Manager
The SATA driver is needed to recognize the HDD by Win XP!
From a few weeks ago (I believe that when 3.6.16 is released), I lost the ability to return to the first Web site loaded on any tab by using the previous button or right click-> menu back.
I upgraded to Firefox 4 and I still see the same question.
This happens if the new tab is created from a link on another tab of an item in my toolbar bookmarks, or if I have on a button open new tab, then the initial Web page in the address bar or in my bookmarks toolbar.
When I navigate to the second site in this tab via a link, manual entry or a bookmark, the previous button is active.
If I navigate to other pages and a right click on the back button, the first page I have loaded is not listed in the history.
It is possible to my modules or something is causing this issue? I can't think of any possible configuration setting that would entail.
If not, should I submit a report in Bugzilla? I couldn't find a corresponding bug report, but it seems that it would have been stated several times if someone else saw this question.
Edited to stop scrolling - Maurane
With the back button does not, problems are caused by the McAfee Site Advisor, if you uninstall or disable this extension, the back button should work again.
I try to install a new SSD in my M91p, but when I press Enter for the splash screen, change the boot order have only Boot from CD rom, then reboot, I get a "error 1962: OS not found" message.
I checked the DVD rom is functional by returning to the old HARD drive and use it.
What Miss me?
I hope that someone here will be able to help
I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)
Can someone help, please?
See you soon
PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;
I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!
It goes to the screen that says Windows stops, but he never does.
Hello1. do you get an error message/code?2. don't you make changes to the computer before the show?3. which antivirus program is installed on the computer?This problem can occur if a third-party program or application prevents the computer to shut down.I suggest for the link and follow the steps in the article:You cannot log off, restart or shut down your Windows XP-based computer-Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.-ATTENTION: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.In addition, the link and follow the steps in advanced troubleshooting.Your computer stops responding when you try to shut down in Windows XP
http://support.Microsoft.com/kb/313290#top-Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.-Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.-Note: Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
Previous screen is a form of research and the results returned. Clicking on one 'other info' button moves to the next screen and print more information. The 'back' button will return to the previous screen, which gives the message "document is no longer available.
Firefox is standard installation of vanilla. All the other major browsers properly return to the previous screen. If this cannot be fixed, we will be forced to give up FIrefox and recommend our customers to 46 000 to switch to a different browser, especially when you use our Web site.
To reproduce this problem, go to www.mybfl.com/search.php, get a book, when displayed, click on the "More info" button By clicking on the "back" button on Firefox illustrates the problem.
Yes, Firefox 32 is at the beginning of this behavior.
I just went and checked tools-> Options-> auto-Cache Management override and for now at least, the problem disappeared.
Thanks, hope that this action has resolved the problem.
My officejet j4580 all-in-one printer does not print all that I try to print from the internet, or in microsoft word. I tried to reinstall, but it gets stuck at 94%, and it took almost 3 hours to get to this point. What can I do? My operating system is vista from microsoft.
Here are a couple of things to try. I would first start by download and run the Diagnostic Print utility. IF this isn't clear, then try the document on the internet printing problems.
See if one of these help.
I recently bought your desktop HP Pavilion p7 1414, I am trying to boot from a CD to reinstall Windows 8 - I put the CD to start first in the BIOS, but when I restart the computer and I have the CD, "press any key to boot from the CD" is not displayed. It starts just directly to the computer HARD disk in Windows to connect.
I have 64-bit Windows 8. 6 GB of RAM and a terabyte of HARD drive space. I'm looking to reinstall Windows 8 for a new start. Any ideas why it won't boot from the CD?
You must go into the BIOS and enable the legacy Mode and disable secure boot.
someone entered cmd and did something to my computer, now, the computer shuts itself, what can I do I tried to reinstall windows and the computer does not start from cd?
* original title - someone entered cmd and did something to my computer, now, the computer shuts itself, what can I do I tried to reinstall windows and the computer does not start from cd? *
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
See you soon.
Mick Murphy - Microsoft partner
Totally new here and I have a question. I replaced the hard drive in the laptop, the old man died.
I set the bios to boot from the cd. He reads the Windows XP cd for a minute then jump to trying to boot on the network adapter.
Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?
If it can boot from a normal cd is the stuffed ROM or am I missing something?
Thanks in advance to anyone who can help you.
> I replaced the hard drive in the laptop, the old man died
Your new hard drive is recognized by the Bios?
> Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?
You can use a recovery (if available) disk or Windows disk copy. In the Bios, you must set the Cd/DVD-ROM as 1st boot device and press F10 save and exit. Turn it back on. Thus, your computer you should start the installation of the Cd drive.
I have a HP Photosmart Premium. It won't print or copy from the main tray. Despite the fact that I specifically designated main tray settings, he continues to try to print from the photo tray. How can I fix it?
My recommendation would be to define the default values for what you do most often. You can assign the parameter of the bins to automatic and the printer should draw the correct tray based on the other parameters of size and type of media. If you experience problems with the automatic selection of tray for a particular document or a picture, you can specify the drawer wished for this print job.
I'm a link the User Guide for your printer. Click here I thought you might find useful.
Maybe you are looking for
Its a Dell usb sound bar. When streaming video through firefox, no noise. I don't hear the sounds of the general system. The usb sound bar works very well when streaming video through IE. Any advice would be helpful. I'm pretty computer illiterate, s
On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor. If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as
I have a printer HP Officejet Pro 6830 and I got the message that reads that there is a problem with the head of a PIN What should I do to fix this? I can't believe that this printer (which was recommended by a person in the place, I bought the best)
I have information on the number of product serial number keyboard, but I can't check if the warranty is still valid someone could show me how to check [Moved from the community centre of Participation]
I just bought a laptop Gateway p-7805u computer comes with windows vista 64-bit. It has a celeron 2 dual-core 2.26 ghz processor, 4 GB ddr3 and a geforce 9800 video card system ram m gts with 1 GB ddr3 video ram. Plug this computer is well beyond wha