Local network connection does not...

Similar Questions

• Satellite A200-1js: local network connection does not appear

  Hey people

  I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:
  

  And in my etiquette system shows this:
  

  I installed the correct drivers

  Everyone knows what is happening?

  Thnkx

  Satellite A200-1js belongs to the PSAE6E series.
  Just a few questions:

  You would update you BIOS to the version of Win XP?
  If it isn't-> do this!

  Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
  If it isn't-> do this!

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• NB200 - network connection does not work

  Hello

  We have 40 nb200 under xp pro connected to our domain. Network connections do not seem to be running. The wireless card is an Atheros AR9285 and Realteak PCIe FE Family controller. In device manager ther is also a Realteak PCIe FE Family controller - wireless intermediate driver that has a yellow! more than. I can't deleted it.
  I did a system restore that allows connections to work for less than a week and we have the same problem again. We also disable the automatic updates.

  Does anyone else have this problem? Anyone who has a solution?

  Thank you very much, Tom

  Ho tomc85,.

  Well, that s really strange, but in my opinion, it happens after a few days, a program or updates are blocking the connection to the local network.

  I put t know what programs you have installed, but the fact is that if after the installation of recovery work, it s not a Toshiba related issue.
  In order to check your updates Windows, AntiVirus, firewall, etc. for the problems. Maybe you can find something.

• My wifi network connection does not appear

  Hello! I hope someone here can help me out.

  The other day my household switched internet companies, and they gave me a new network name and password to connect to the wifi. However, the new network is not displayed on the list of my laptop Vaio wifi connections! My neighbours networks are all appear, and I am still able to connect to other wifi networks, so it doesn't seem to be a problem with the WiFi on my laptop (the wifi driver is up-to-date as well). In addition, my phone and Tablet have no problem finding and connecting to the network, identical to those of the other computers in my house, so I know that it is not a problem with the router or the connection itself. The router and laptop have all both been restarted, but that did not help either.  We tried to call the internet society, but they believe it is a problem with the computer itself, since it is the only one that the network does not appear on. It's just the network that does not appear in my list of available connections. I have never experienced a problem like this before!

  Can someone help me understand what could be the cause this and tips to help repair?

  For reference, my laptop is a Sony's Vaio, model number: VPCCB22FD, running Windows 7 (which is what it came with).

  Thanks in advance!

  Hi hard_shark,

  Welcome to the community of Sony!

  What is the type of your wireless router? (You can call your service provider if you don't know). Your computer is too far from the wireless router? It's pretty hard, but we're going to isolate it for us to solve the problem.

  • Power cycle or reset your router. (Even once, you can call your ISP for help). Power cycle your laptop as well. Just remove the battery and press the power button for 5 seconds.
  • Reinstall wireless driver. - Start -> type-> Device Manager double-click network adapters -> right click and Uninstall (DO NOT REMOVE) the wireless network card driver-> to restart the laptop.
  • If still the same then download again the driver wifi: Intel® WiFi Link 1000 BGN Driver then restart the unit.
  • Run the Windows updateand Vaio update .
  • Run convenience store -> Start -> type Troubleshooting -> click on network and Internet -> select network card , then follow the instructions on the screen.
  • go to the control panel-> (as read by: category) under network and Internet, select view network status and tasks -> click on set up a new connection or network -> connect to Internet -> No, create a new connection -> select Wireless and follow the instructions on the screen.

  Hope these helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Wireless network connection does not

  I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate

  I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you

  I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.

  Why HP support could not help me in what I don't know, I just got the race!

  Hope this helps others with similar problems.

• Network connection does not

  When I try to connect to my old computer windows7 with new computer windows 7 via the network, I get the following message: "computer is correctly configured, but device or resource does not."  Help?

  Hi Rick,

  Thank you for choosing to ask your question in the Microsoft forums.

  You can not put networked 2 Windows 7 computers. To help you solve this problem, I have provided a few methods.

  Method 1:

  Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after the diagnosis is made, follow step 7 of the article so that the computer can be configured to start in Normal startup.

  Method 3:

  Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Warning: If you need to disable temporarily to install additional software; You must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if you need additional assistance.

• Internet connection sharing: "Bluetooth network connection" does not appear in the list "Home Networking connection."

  Hello.

  With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).

  When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."

  Equipment: laptop Samsung NB30:

  • Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006

  As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.

  Also, when I tried to fix this problem manually, other questions are raised:

  • There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
  • When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?

  So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.

  Hi LeoniusLeonius,

  Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  Sharing an Internet connection between multiple computers

  http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers

  Change which computer on your network connects to the Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-which-computer-on-your-network-connects-to-the-Internet

  See if one of the articles will help you in fixing the issue.

  Any sharing via command line for internet connection, unfortunately there is no command available to do.

  Hope that answers your query.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• network connection does not work on the static ip address

  Hello:

  I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.

  Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:

  

  Hello and welcome to the community

  There are a few things to consider in this regard

  First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed

  Just in case, here is the procedure to do so:

  http://TechNet.Microsoft.com/en-us/library/cc794931 (WS.10) .aspx

  Second of all, to virtualize a domain controller also has a specific process that must be followed.

  Most of the people prefer to create a new virtual domain controller and move all of the above roles.

  Here are two rounds, that you might find useful:

  http://communities.VMware.com/thread/209813

  http://communities.VMware.com/thread/209889

  Don't forget to assign points if you find this useful/correct

• Pavilion e9150t: my local network connection do not have a valid IP configuration

  I lose the internet connection program to fix auto i run window, it will come out with area connection do not have a valid IP address

  configuation and no. fixed, please help me to solve this problem

  Hi again ke0757,

  This is fantastic news!

  If this answer solved your problem, can you please mark it as an accepted solution? This will help others with the same question to find the answer they're looking for.

  Have a great rest of your day!

• Local network connection appears not to, I'm missing a Driver?

  Hello

  Today, I wanted to test Ethernet/LAN on my desk that I just got the possibility of. But when I tried to plug in the Ethernet cable to the wall I have not all connections about LAN. I also checked my adapters to see if it has been disabled, but there is no choice for LAN it is.

  So I decided to test it on a laptop to check if it was my computer or if there was something wrong with the cable. It turns out that it was my computer, like LAN worked perfectly on the laptop.

  I then decided to check my drivers and it said I didn't have a driver of Ethernet controller. So I went around the internet to find something he did, but it seems that I can't get a driver for it, and I wonder if maybe that's the problem.

  The current mother Board that I use is an Asus ROG Maximus VI Gene, and for the wireless controller, it is an Asus PCE - N10 11n Wireless LAN PCI - E Card.

  I've not seen anyone else with the same problem I have, not only on the 'forums' or the support of Microsoft, but also on other forums.

  I would get this as soon as POSSIBLE and I hope someone is willing to help and can help.

  Best regards

  Zodiac/Simen

  THE SOLUTION:

  Thank you very much for your help! But I have not found the answer here... A little.

  What I've done, is to let the auto update/device manager when you try to install a new update for the network driver search my entire drive.

  But earlier, I downloaded a driver from Intel for connections Ethernet Intel(r) (I217-V). And I guess that's the one I downloaded to adapt to what said properties.

  But when trying to install Windows would not accept. so I came here for more help.

  For some reason but now he accepted it. Could have been that I was stupid with install, but it has finally worked :).

  What I've done, it is I went to the Device Manager (control/material Panel) and Device Manager/Sound found my Ethernet controller/adapter click right on it and chose properties, here on I chose the details and on the menu drop-down I chose the hardware ID, then copy & paste the second line of text and he looked up on google and found something on Intel sites that match my line of text.

  Thank you for the help guys or girls!

  Best regards

  Zodiac/Simen

• Toshiba Stor.E TV + Wireless Network Connection does not work

  I can't transfer files from my desktop PC to the Stor.E via the wireless network. I use a USB WiFi dongle with a Toshiba label thereon, such as provided by Amazon when I bought the Stor.E and I had a lot of trouble so he could connect despite the strength of the signal being 7 of 10 bars.

  I now get linked and read directories right on the PC but when I try to transfer a file transfer 1% (he said) of the file and then hangs until, presumably, it expires a few minutes later and told me then the USB WiFi dongle has failed. However, according to the network set up it is still connected.

  I tried to access the interface of Samba using 192.168.1.9 port number, which is that of the Stor.E, and by using a browser on the PC and all I get is a page that shows a simple example of HTML + CGI - that is the Samba interface?

  Anyone has any suggestions or do I return to the transfer of files via a USB.

  Hello

  Think that a thread describes a problem which could be similar:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65340

  Lasko has posted a link for the update of the firmware maybe you need to update the firmware and should test again

  There is also an update of the firmware on the European driver Toshiba page
  [Stor.E TV + firmware udapte | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Network connection does not not on real device

  Hi friends,

  I use the following code to connect to the Web Service using Soap. I use a wifi connection to connect to the web server. In the Simulator, its works well but the problem is there

  test the application on the actual device, I'm Java.io.IOException: Tunnel failed error, although I

  Joint

                   ;interface=wifi
  

  the above line. What could be the reason behind this, please help me, its urgent...

  {
      FromF2C t = new FromF2C(fahrenheit2.getText());
      t.start();
      try
      {
          t.join();
      }
      catch (InterruptedException e) {
  
          e.printStackTrace();
      }
      t.setMethod();
  }
  // FromF2C that extends Thread.......
  class FromF2C extends Thread
  {
  String temp = null;
  String result2 = "";
  
  public FromF2C(String temp)
  {
      this.temp = temp;
  }
  public void run()
  {
      String serviceurl = "http://www.w3schools.com/webservices/tempconvert.asmx?op=FahrenheitToCelsius";
      String servicenamespace = "http://tempuri.org/";
      String soapaction = "http://tempuri.org/FahrenheitToCelsius";
      try
      {
          SoapObject request = new SoapObject(servicenamespace, "FahrenheitToCelsius" );
          request.addProperty("Fahrenheit", temp);
  
          SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11);
          envelope.bodyOut = request;
          envelope.dotNet = true;  
  
          //HttpTransport httpt = new HttpTransport(serviceurl+";interface=wifi");
          HttpTransport httpt = new HttpTransport("http://www.w3schools.com/webservices/tempconvert.asmx?op=FahrenheitToCelsius;interface=wifi");
          httpt.debug = true;
  
          try
          {
              httpt.call(soapaction, envelope);
              result2 = (envelope.getResponse()).toString();
          }
          catch(Exception e)
          {
              e.printStackTrace();
              result2=e.toString();
          }
          //((SampleScreen)this.getActiveScreen()).setScreen?Test(result);       
  
      }
      catch(Exception e)
      {
          e.printStackTrace();
      }
  }
  public void setMethod()
  {
      celcius2.setText(result2);
  }
  }
  

  I use: Blackberry Simulator: 9000 "BOLD"

  BlackBerry smartphone: 9000 "BOLD"

  BlackBerry Eclipse plug-in

  JDE 4.6

  any help in this regard would be highly appreciated,

  Thanks in advance...

  I would like to confirm that you are getting an ioException tunnel failed.  You can check that?

  I have to admit that I never had no problem with connections like that with '; '. = wifi interface.  It works just normally, although in some levels of the OS, it seems just to randomly break from time to time.

  I support the idea to install the network on the device Diagnostic tool.