TECRA M1 with HARD drive problem

Similar Questions

• Qosmio F60 turning is not on - HARD drive problem

  My F60 running stock windows 7 and when I turn it on I get a black screen with the following text:

  + Check the file system on C: +.
  + the type of file system is NTFS.
  + Volume name is s3a5802d002 +.
  + One of your disks needs to be checked for conisitency. +
  + You can cancel the disk check, but it is strongly recommended that you continue.
  + To skip verification of the disc, press any key within 10 seconds.

  If I leave it just like that.
  I try to ignore it, and it does not work so I turn it off and go again on the third time, to turn on while I press ESC. What should I do about it?

  Re: do everything or send it as it is only 6 months old, it is Bernard did this for 5 months

  Hello

  It sounds a bit like a HARD drive problem.
  I recommend checking out the HARD drive using a free tool called Drive Fitness Test
  This free tool allows you to get more details on the State of the HARD drive and maybe some error would be detected which would mean that HARD drive failures and disk HARD must be replaced.

• Alternative to the reset by Satellite A660 for potential HARD drive problem

  In the last week or two, I got a few blue screens, saying he was driving demand, and that windows must be shut down to avoid damage my computer.

  I have just restart and continue working.
  The last time it happened, I had repeatedly "initialization failed" and it says hdd, SDS, fdd. If I pressed the power button until I didn't see no signs of activity, then started. Things went well. I called Toshiba support and they recommended that I go home and save my files before continuing. It took hours selectively to clean, sort the previous backups, and a small footprint of the backup system.

  When I called Toshiba once again, they recommended a "takeover", which is restoring the factory settings. It puts me in the stone age. I have to go through a never-ending process of the upgrade to Windows 7 Pro 64-bit, install and reconfigure all the applications and environments/configurations, etc. It will essentially take on holiday, if not more. I'll also have to get another computer (maybe a netbook) to stay in touch while I restart my laptop. It's barely more than a year.

  Is there a diagnosis I can do to determine the probability that there is a hard drive problem? Support for Toshiba said that is the surest way, because it provides a diagnostic F10 for the hard disk code, and it also pushes the bad sectors at the end of the disc (logically, I suppose, since you can't physically move a fault).

  > About Hitachi DFT, is it important that my HARD drive is Toshiba mk6465gsx? This is what is displayed "Hard drives" in the Device Manager.

  It s no matter what HARD drive manufacturer, it is the Drive Fitness Test is able to scan all hard drives to find errors.

  > Also, http://www.hitachigst.com/support/downloads/#DFTshows links to create boot disks, but I was wondering if I could create a bootable instead.

  Not sure if this is possible if there is that one option to create a startup disk, and then a flash stick does not work. But of course you can try this out.

  > This laptop does not come with a floppy drive, and I still create coasters trying to burn discs.
  You don't need the floppy drive, the tool must create a disk bootable (CD)

  > I guess that the same question can be asked on Memtest86. Another issue is the relevance of Memtest86 for my system. My c drive has a "Program Files" folder, but also a "Program Files (x 86)" folder for 32-bit applications. Memtest86 is for the x 86 architecture. I don't know if my 64-bit Windows 7 involves a non - x 86 architecture.

  I guess that Memtest86 should also work on Win 7 64 bit systems. But also the MemTest 4.20 is 64-bit capable

• XW6600: My XW6600 gives my hard drive problems!

  So, after much work and DIY, I did my workstation XW6600 works like a charm... or a little.

  After you have asked here and it work, I bought a HARD drive of 2 TB as a file storage drive but lately is bugging me off the coast. It's almost a year and the computer worked perfectly so far.

  The second hard drive disconnects and stops showing on Windows on certain occasions, especially if I copy/written on this subject.

  I tried to change the port, because it worked once before, but it is not serious, it's the same thing after a few days, works very well.

  Thanks in advance.

  Well, I know I don't give a lot of information, but I think I might have found the problem.

  I first of all so that it could be a motherboard problem (I don't know, maybe some incompatibilities with some HARD drive I don't know), but seemed unlikely because everything, including SSD, works very well. Then I tried to google my model of HARD drive with 'bug' or 'problem '.

  My bad luck with hard drives is legendary. Really, the only two (1, 2) of hard disks that I bought in the last few years, each of them had problems with firmware. Well, even the (SSD) have one, partially fixed by the firmware update.

  So, I found an old PCI SATA controller and tried to connect the HARD drive to it and... still the same problem. Time to look for something on this hard drive.

  I found this thread in T H and they solution they found is to change the power settings for "never stop".

  I hope some of you find this useful.

• A55 (8982 - 77G)-Windows 7 SATA Hard Drive problem

  Hi, hoping someone can help here. I just bought the above system, it came without a hard drive, as it was purchased at a business. I installed a Seagate 200 GB SATA hard drive and I am trying to install Windows 7 Ultimate... the HD is recognized by the BIOS and the POST, but the installer of windows 7 do not see, I searched relevant drivers for the motherboard... but can't find it nowhere I tried to set the Auto and Serial ATA SATA BIOS setting only with no success... Any help would be appreciated.

  Concerning

  Hi and thanks for the answer, had sorted out, seems it was a b the hard drive problem. Once I have two-way for another installation of windows 7 200 GB SATA drive picked up immediately.

  Concerning

• I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Hello

  I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Refer

  Using creative cloud | Download, install, update or uninstall applications

• Toshiba NB220-12W - problem with HARD drive - need to install the OS

  My apologies if this is posted in the wrong section.

  I have a 12W NB22, which I believe is more made. I tried to install Windows 10 that seemed to download without any problem.

  However after turn off and turn on again, I was faced with a black screen and a message saying: an operating system not found.

  Assuming that the hard drive is damaged it is simply

  b replace the hard drive with a new and
  (b) install a new operating system. ?

  Any help would be welcome

  I want to buy it. Is this useful?

• With Toshiba Tecra S3 RAID hard drive temperature monitoring

  I wonder if there is a software (or a tweak for Toshiba RAID Utility/drivers) that would allow the monitoring of the temperature of the HARD drive.

  Utility known as SpeedFan, HDTune etc., I tried, and that work very well at least with IDE drives, either don't notice not the hard drive SATA RAID at all on my Tecra S3, or they can not access the S.M.A.R.T on the temperature information (possibly information can not pass through Toshiba RAID drivers...)

  Thnx for any comments.

  Hello

  I usedEveresthome edition.
  But I am an owner of the laptop with a disk IDE HDD and to tell the truth I don't know if it will support the feature m RAID.

  But you can test it.
  This utility reports the HARD drive and the temperature of the CPU and provides many useful and detailed information on the characteristics of portable equipment.

  I hope it's going to market

• Re: Satellite a660 - problem with HARD drive!

  Hello!

  When I turned on my computer this morning, first time I heard the HARD drive worked very noisy. It was like buzzing and clicking, has never been like that. Computer is 3 months old, bought in the pc world.

  If anyone can help what to do?

  Thank you

  Hello

  > he was like a buzzing and clicking on... Was never like that. Computer 3 months ago.

  Sometimes, this can happen with the new hard drive too. I recommend you save all data, if it stops working. In case you, I communicate with the service center and ask them to replace. they will do it for free. you see, it looks like mechanical problem and don't think you can fix it yourself

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• Problems with hard drive on my satellite C660

  Hi my name is Lisa and I'm new to the forum, I hope that someone can help you. When I turn on my Toshiba Satellite C660 I get a message saying cannot load files with this information...

  File Boot\BCD

  Status-oxcoooooof

  Info - an error has occurred trying to read the boot configuration data of you.

  When he continues to try to load the next message goes something being changed and said something on the hard drive or the CD-ROM drive I think it was the CD-ROM drive even when...

  I'm going to be able to solve this problem or am I likely to replace the hard drive or something...

  Thanks in advance for any help/support and advice xx xx Lisa

  Did you create the recovery disk?
  If yes try to start and check whether the HARD disk access is possible.

  Before you try this BIOS setting defaults.

• Problem with hard drive

  Hello world

  I have my laptop Thinkpad Lenovo R60 (R series) during the 2007 year of the College. Last month I had some problem with my hard drive, then I took my laptop to the Lenovo service center. Then they were replaced with new hard drive, after that, I tried to install windows XP on my laptop, then it displays message as hard disk drivers are not installed then where can I get these drivers. If you don't know this topic then tell me who contact. Please tell how to solve this problem.

  Thank you

  Jagadish.

  If you attempt to load a generic copy of XP pro operating system, then you must change the SATA from BIOS to ACHI mode to compatibility.

• Start with external hard drive problem

  I recently bought a Western Digital 1 TB external hard drive. When it is connected through the USB port my Pavilion a815n Windows XP hangs on the blue HP screen at startup. Western Digital technical support Advisor info sent to me I need to change a setting in BIOS but I can't find the trunk of USB device option setting in the BIOS of HP.  Can you tell me how to access this setting, or what else to do to solve the problem?  Thank you!  Jake

  Problem:
  After connecting a device USB to the PC, the computer does not start in Windows.

  Cause:
  The motherboard has a boot from the USB device, or a similar option, which is enabled in the system BIOS.

  Solution:
  In the system BIOS, disable the option to boot from the USB device and the USB Legacy Support option. This will allow the PC complete the process on the internal hard disk and allow you to enter Windows. If this does not work for any reason, you should boot your PC before connecting the USB key. Once the computer is fully booted Windows, plug the USB and wait for the operating system to detect the drive.

  Update the BIOS seems to have solve the problem. It was normally restarted with the attached hard drive.  Thank you!!  Jake

• problems with hard drive HP envy m6 - 1222sr

  HP ENVY m6 - 1222sr Notebook PC (Windows 8.1)

  Bought a laptop with windows by default 8. Everything was fine. But after the upgrade to windows 8.1 have a problem with the hard drive. The simplest tasks cause the startup hard disk 100%. The system starts to slow down. It is interesting that there is no difference in the speed of read/write. 0.1 mb/s or 10 + hard drive still mb/s is charged to 100%. After the defragmentation - nothing has changed. I suspect that blame the upgrade to Windows 8.1. How to solve the problem?

  PS Sorry for the bad English.

  Everything was much easier than I thought. At first reinstalled Windows and drivers, but it did not help. The problem disappeared after disabling user account Windows and switching to a local account. After 4 days of torment is a feeling that the laptop is running 10 times faster. I hope that this all ends.

• UCS C22 M3 software RAID LSI problem with hard drive

  Hello

  I post here because I searched many hours for a stupid problem.

  I have a Cisco UCS C22 M3 with soft RAID LSI MagicRAID.
  I have two hard disk of 1 TB.
  I create a RAID array with the type 1 (mirror).

  When I run the installation of VMware ESXi 5.1 U1 I see the RAID array, but the two discs.
  I think that it is a driver problem.
  So, I install special with an iso VMware in the VMware Web site for Cisco server.
  I have test with ESXi 5.0 and 5.1, and 5.1 U1 but it's the same problem.

  I try to remove the RAID array and to install esx on disc one monkey. Installation works well, but in the boot menu, I can't boot from a hard disk. I don't know why I search with UEFI and she is disabled.

  I test with windows 2012, and 2008R2 to check if its working but in install I don't see also hard drive or the RAID array.
  I go to Cisco and download the driver of the 2G for VMware Linux and Windows.
  I try inserting the driver in windows install, but does not.
  I think that the driver for a hardware RAID card and software.

  I have try to disable the LSI RAID in the advanced bios "SouthBridge". After I disabled I don't know how I can do to start on the hard drive.
  When I go to the start menu (F6) I see absolutely nothing in drive.

  I test this on two Cisco server.

  I can't know what I can do now. I take a working installation tomorrow and nothing.

  I join you a photo of the boot sequence LSI.

  Thank you very much.

  Sent by Cisco Support technique iPhone App

  Stephane,

  For what I understand, you use the RAID controller integrated, therefore, these drivers will not work you:

  -LSI 92xx

  -LSI 106xE

  -LSI 2008 M

  -INS 3081E-R

  -LSI8708EM2

  -LSI 9201< all="" of="" the="" above="" are="" not="" the="" controller="" you="">

  -CISO 1225 x< this="" is="" for="" the="" vic="">

  -CISCO P81E< this="" is="" for="" the="" 1st="" generation="" of="" vic="" cards,="" so="" definitely="" not="" a="" raid="">

  Pilots are organized into top level by operating system folders, and each folder of OS has a structured series hierarchically who become more specific subfolders so that you can find the exact drivers you need. When you navigate to a folder containing the drivers, it will contain also one or several README files that explains what are these drivers in particular.

  Here is an example of the structure of folder for Windows:

  Windows    ChipSet       vendor          blade-model-number             OS-version-number                All                ia64                Lang (contains language subfolders)                Vista                x64

  You need to look for: /< OS > / storage/Intel/C600 /.< if="" you="" are ="" doing="" the="" installation="" of="" the="" os="" through="" the="" kvm,="" you="" first="" need="" to="" un-mount="" the="" os="" .iso="" image="" to="" mount="" the="" drivers,="" once="" the="" drivers="" are="" done,="" un-mount="" the="" drivers="" and="" mount="" again="" the="" os="" .iso="">

  If it does not, you better open a TAC case that will allow us to put in place an additional troubleshooting Webex meeting.

  -Kenny