Network connection does not
When I try to connect to my old computer windows7 with new computer windows 7 via the network, I get the following message: "computer is correctly configured, but device or resource does not." Help?
Hi Rick,
Thank you for choosing to ask your question in the Microsoft forums.
You can not put networked 2 Windows 7 computers. To help you solve this problem, I have provided a few methods.
Method 1:
Run the network troubleshooter utility.
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
Start the computer in safe mode with network and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: after the diagnosis is made, follow step 7 of the article so that the computer can be configured to start in Normal startup.
Method 3:
Temporarily disable the security software.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Warning: If you need to disable temporarily to install additional software; You must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Let us know if you need additional assistance.
Tags: Windows
Similar Questions
-
Network connection does not work after reinstalling Windows XP.
Original title: problems with reinstalling XP.
I had re format and re install windows xp but now my network connection does not work. I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver. Any thoughts appreciated.
Hi John Fisher_888,.
You can download & install the drivers for the adapter from this link & check if it helps
Hope the helps of information.
Please post back and we do know. -
NB200 - network connection does not work
Hello
We have 40 nb200 under xp pro connected to our domain. Network connections do not seem to be running. The wireless card is an Atheros AR9285 and Realteak PCIe FE Family controller. In device manager ther is also a Realteak PCIe FE Family controller - wireless intermediate driver that has a yellow! more than. I can't deleted it.
I did a system restore that allows connections to work for less than a week and we have the same problem again. We also disable the automatic updates.Does anyone else have this problem? Anyone who has a solution?
Thank you very much, Tom
Ho tomc85,.
Well, that s really strange, but in my opinion, it happens after a few days, a program or updates are blocking the connection to the local network.
I put t know what programs you have installed, but the fact is that if after the installation of recovery work, it s not a Toshiba related issue.
In order to check your updates Windows, AntiVirus, firewall, etc. for the problems. Maybe you can find something. -
Satellite A200-1js: local network connection does not appear
Hey people
I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:
And in my etiquette system shows this:
I installed the correct drivers
Everyone knows what is happening?
Thnkx
Satellite A200-1js belongs to the PSAE6E series.
Just a few questions:You would update you BIOS to the version of Win XP?
If it isn't-> do this!Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
If it isn't-> do this! -
My wifi network connection does not appear
Hello! I hope someone here can help me out.
The other day my household switched internet companies, and they gave me a new network name and password to connect to the wifi. However, the new network is not displayed on the list of my laptop Vaio wifi connections! My neighbours networks are all appear, and I am still able to connect to other wifi networks, so it doesn't seem to be a problem with the WiFi on my laptop (the wifi driver is up-to-date as well). In addition, my phone and Tablet have no problem finding and connecting to the network, identical to those of the other computers in my house, so I know that it is not a problem with the router or the connection itself. The router and laptop have all both been restarted, but that did not help either. We tried to call the internet society, but they believe it is a problem with the computer itself, since it is the only one that the network does not appear on. It's just the network that does not appear in my list of available connections. I have never experienced a problem like this before!
Can someone help me understand what could be the cause this and tips to help repair?
For reference, my laptop is a Sony's Vaio, model number: VPCCB22FD, running Windows 7 (which is what it came with).
Thanks in advance!
Hi hard_shark,
Welcome to the community of Sony!
What is the type of your wireless router? (You can call your service provider if you don't know). Your computer is too far from the wireless router? It's pretty hard, but we're going to isolate it for us to solve the problem.
- Power cycle or reset your router. (Even once, you can call your ISP for help). Power cycle your laptop as well. Just remove the battery and press the power button for 5 seconds.
- Reinstall wireless driver. - Start -> type-> Device Manager double-click network adapters -> right click and Uninstall (DO NOT REMOVE) the wireless network card driver-> to restart the laptop.
- If still the same then download again the driver wifi: Intel® WiFi Link 1000 BGN Driver then restart the unit.
- Run the Windows updateand Vaio update .
- Run convenience store -> Start -> type Troubleshooting -> click on network and Internet -> select network card , then follow the instructions on the screen.
- go to the control panel-> (as read by: category) under network and Internet, select view network status and tasks -> click on set up a new connection or network -> connect to Internet -> No, create a new connection -> select Wireless and follow the instructions on the screen.
Hope these helps.
Kind regards
Vincent
If my post answered your question, please mark it as "accept as a Solution.
-
Satellite C70-B-306 - local network connection does not work
Hello
I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
What can I do? I have the laptop 1 week.René
Hello
What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?
Open Device Manager and check if the LAN CSA is listed and enabled correctly.
-
Wireless network connection does not
I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate
I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you
I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.
Why HP support could not help me in what I don't know, I just got the race!
Hope this helps others with similar problems.
-
Hello.
With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).
When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."
Equipment: laptop Samsung NB30:
- Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006
As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.
Also, when I tried to fix this problem manually, other questions are raised:
- There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
- When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?
So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.
Hi LeoniusLeonius,
Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
Set up a shared Internet connection using ICS (Internet Connection Sharing)
Change the settings for ICS (Internet Connection Sharing) Internet
Sharing an Internet connection between multiple computers
http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers
Change which computer on your network connects to the Internet
See if one of the articles will help you in fixing the issue.
Any sharing via command line for internet connection, unfortunately there is no command available to do.
Hope that answers your query.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
network connection does not work on the static ip address
Hello:
I am newbie for vmware, recently, I've converted a windows 2008 virtual domain controller, after the fact, everything works fine on the IP of the DHCP, but after I change the static ip address, I can always ping the IP but the DC lost its functionality and internet does not work.
Any idea or help that can make my static ip, would be very grateful if someone can help! Here is my network configuration:
Hello and welcome to the community
There are a few things to consider in this regard
First of all, it is not a simple task to change the IP address a domain controller, so I don't know what procedure you followed
Just in case, here is the procedure to do so:
http://TechNet.Microsoft.com/en-us/library/cc794931 (WS.10) .aspx
Second of all, to virtualize a domain controller also has a specific process that must be followed.
Most of the people prefer to create a new virtual domain controller and move all of the above roles.
Here are two rounds, that you might find useful:
http://communities.VMware.com/thread/209813
http://communities.VMware.com/thread/209889
Don't forget to assign points if you find this useful/correct
-
Toshiba Stor.E TV + Wireless Network Connection does not work
I can't transfer files from my desktop PC to the Stor.E via the wireless network. I use a USB WiFi dongle with a Toshiba label thereon, such as provided by Amazon when I bought the Stor.E and I had a lot of trouble so he could connect despite the strength of the signal being 7 of 10 bars.
I now get linked and read directories right on the PC but when I try to transfer a file transfer 1% (he said) of the file and then hangs until, presumably, it expires a few minutes later and told me then the USB WiFi dongle has failed. However, according to the network set up it is still connected.
I tried to access the interface of Samba using 192.168.1.9 port number, which is that of the Stor.E, and by using a browser on the PC and all I get is a page that shows a simple example of HTML + CGI - that is the Samba interface?
Anyone has any suggestions or do I return to the transfer of files via a USB.
Hello
Think that a thread describes a problem which could be similar:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65340Lasko has posted a link for the update of the firmware maybe you need to update the firmware and should test again
There is also an update of the firmware on the European driver Toshiba page
[Stor.E TV + firmware udapte | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42] -
Network connection does not not on real device
Hi friends,
I use the following code to connect to the Web Service using Soap. I use a wifi connection to connect to the web server. In the Simulator, its works well but the problem is there
test the application on the actual device, I'm Java.io.IOException: Tunnel failed error, although I
Joint
;interface=wifi
the above line. What could be the reason behind this, please help me, its urgent...
{ FromF2C t = new FromF2C(fahrenheit2.getText()); t.start(); try { t.join(); } catch (InterruptedException e) { e.printStackTrace(); } t.setMethod(); } // FromF2C that extends Thread....... class FromF2C extends Thread { String temp = null; String result2 = ""; public FromF2C(String temp) { this.temp = temp; } public void run() { String serviceurl = "http://www.w3schools.com/webservices/tempconvert.asmx?op=FahrenheitToCelsius"; String servicenamespace = "http://tempuri.org/"; String soapaction = "http://tempuri.org/FahrenheitToCelsius"; try { SoapObject request = new SoapObject(servicenamespace, "FahrenheitToCelsius" ); request.addProperty("Fahrenheit", temp); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11); envelope.bodyOut = request; envelope.dotNet = true; //HttpTransport httpt = new HttpTransport(serviceurl+";interface=wifi"); HttpTransport httpt = new HttpTransport("http://www.w3schools.com/webservices/tempconvert.asmx?op=FahrenheitToCelsius;interface=wifi"); httpt.debug = true; try { httpt.call(soapaction, envelope); result2 = (envelope.getResponse()).toString(); } catch(Exception e) { e.printStackTrace(); result2=e.toString(); } //((SampleScreen)this.getActiveScreen()).setScreen?Test(result); } catch(Exception e) { e.printStackTrace(); } } public void setMethod() { celcius2.setText(result2); } }
I use: Blackberry Simulator: 9000 "BOLD"
BlackBerry smartphone: 9000 "BOLD"
BlackBerry Eclipse plug-in
JDE 4.6
any help in this regard would be highly appreciated,
Thanks in advance...
I would like to confirm that you are getting an ioException tunnel failed. You can check that?
I have to admit that I never had no problem with connections like that with '; '. = wifi interface. It works just normally, although in some levels of the OS, it seems just to randomly break from time to time.
I support the idea to install the network on the device Diagnostic tool.
-
Local network connection does not...
Hi, I have a problem with my internet connectibility. I have an Acer Aspire 5560 g-7809 and I recently bought the laptop used. It has been reformatted and installed with all windows updates before being delivered to me. Now that I have, however, I can't seem to get an internet connection via the Ethernet connection... but the wireless connection works FINE. I tried a lot of things. When I run diagnose it indicates that the computer cannot communicate with the dns server or device. And in the connection manager it shows that the computer is connected to the modem but the modem is not connected to internet... which is false, because the modem works fine with another computer. What happens here? !
Too bad! I solved this myself as it ended up being my modem, it is a cable modem and it was to be delicate with only willing to work to the last computer that I am connected. UGH!
-
Socket connection does not work with SIM network
Hi all
I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully. But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.
Can someone tell me why socket connection does not work when I use the SIM card network.
If anyone knows about internal or the following BlackBerry setting that also tell me
"Option-> advanced-> TCP Option.
Thank you
Neeraj Chauhan
Thanks Peter,.
For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.
Thank you & best regards
Neeraj Chauhan
-
Excite PRO 3G connection does not work after last update Android v4.3
Hello
I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.
After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.
Please help me.
Thank you> After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".
Go to mobile network settings and search again for the 3G network.
I had a similar problem with my Android Smartphone and my o2 provider
I started to search for new, so I chose the O2 again and then I could solve the problem.In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)
-
I need help, its frustrating me! network discovery does not illuminate.
my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.
Hello
Did you change your computer?
Method 1:
Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.
Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
1. click on start, type firewall and then click Windows Firewall with advanced security.
2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
4. apply the changes and check the result.For more information about network discovery, see this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discoveryStep 2: Check the status of the following services: browser, TCP/IP NetBios support.
1. Click Start, type services.msc and press to enter.
2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
3. change the startup type to automatic and start the service.
4. apply the changes.Method 2:
Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.
Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.
To turn on network discovery
1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.
2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
I also suggest you turn on discovery of the network link and check.
Enable or disable network discovery
http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery
See also:
Windows wireless and wired network connection problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Maybe you are looking for
-
Satellite L450: upgrade RAM: BIOS shows 8 GB, Win 2 GB
Hi all I have a L450 - 13L that has provided my company to me with 2 GB of RAM, it was about 2 years ago now...The laptop has been very good, but it has been gradually slowing down with the applications that were installed and suites operationso I re
-
HP ENVY TILT 23-m100-ep: install linux on an HP ENVY TILT 23-m100-ep
I want to overlap Windows that comes with linux ubuntu computer. A little tutorial would be helpful.
-
Hello There is a technique to draw a text note on graph XY. For example the text "AAAAAA" put near the upper left of the XY graph. Thank you.
-
My computer screen has decreased to half the normal size and is now only in the middle. I have windows vista on my Toshiba laptop. Please help me to get back to normal size.
-
I recently installed a new router/modem from my ISP. The only problem I have is to reconnect my wireless HP D110 printer. Whenever I have try the connection fails. The test report said something about a MAC address filtering can prevent the connectio