Local users of VMware ESXi 5.5 for the oversight role of the CIM
Hello, is it possible to create local users in ESXi and assign roles and permissions to manage only CIM interactions? I learned that local groups are not supported to 5.1 from. This means that we cannot add a role (for CIM Interactions only) for a local user created on ESXi? Please advise!
Thank you!
Why not give a user privileges? Maybe he needs admin access to host not only CIM interactions. Any problem with giving Admin privileges?
Tags: VMware
Similar Questions
-
VMware ESXi WARNING - battery on the controller workload 0...
Hello world
I get this warning frequently daily some of my ESXi server that runs on Dell Power Edge 2950 - III:
Status: Warning (yellow)
Alarm: State of the sensor changed hardware host
Duration: 2010-10-24 22:30:55
Sensor "on controller 0 battery charge...". "equal attention.
Sensor 'State of health Rollup VMware' equal attention
is there something wrong with my server ESXi?
Thank you.
As written it is a normal feature of the PERC controller which has a cycle of learning for the battery.
On vsphere 4.0 this task generate a lot of alarms, but after I upgraded to 4.1 I got the alarms only during the learning cycle.
André
-
VMware ESXi does not support the RAID on HP Proliant ML110 G5 drives
Hello
I installed VMware ESXi on my HP Proliant ML110 G5. I got 3 hard drives on my server at the moment, one of them is VMware ESXi and other two are RAID1.Whenever I connect to my server via vSphere client I have the chance to see every HARD drive (datastore) separately. Is it possible that VMware does not RAID installation?I would need to see these two hard drives as a data store. Do you have any ideas on how I can do?Thank you.like any other typical server, you need to configure the sata raid controller RAID5/RAID0. but keep in mind that this controller without any battery backed cache would have very horrible performance. Another way is that you can use datastore span to provide as a large store of data, but if you lose all of the computer, you will lose all data.
-
VMware - SAN verses server for the guest operating system
We set up our VMware environment 4 years ago and want to replace the hardware and upgrade to VSphere. We are now part of a large organization and they are questioning our original facility regarding using a San to host Windows Server guests in this environment. They believe that a San is only for storage and VMware customers have to live on a server. I'm looking for confirmation that we use "best practices" by having the OS guest systems on a San, rather than a server. I'd really like something VMware that says to use a SAN and why. It's our Installer; We have 4 servers ESX 3.5 with dual processors core quad, 32 GB of ram and quad port network adapters. The ESX servers connected to the SAN via redundant fiber via HABs connections. The SAN has 6 TB of storage space and we accommodate 24 people from Windows 2003. I say that we have this right and they say I should welcome the guests on a server and not a SAN. My point is why are in charge of the server OS and everything that comes with it as patching and antivirus and multiple HBA when I can get a SAN form HP at equal or lower cost. I just need help to make my case.
Shared storage is a requirement for features such as vMotion, DRS, and HA.
It is certainly having a guest on local storage, but what happens if you have a question of host or need maintenance? If you use a shared storage and you need to host maintenance you can simply vMotion the VMS to another host and there is no interruption of service. Without shared storage log off the virtual machines or need to spend downtime to migrate them to another host. If a host goes down, your VM on local storage is down until the host is repaired. With HA and a shared storage, another host will reboot the virtual machine and it will be online in a few minutes.
-
Restrict user access to admission 0-9 for the string data
Hello
I want to this control at the entrance façade. This control allows the user to choose between 0-9. For example 0 1 2 3 4 5 6 7 8 9.
Control do not allow the user to upgrade-1-2-3... 10 11 or... or decimal.
This number will be still converted to a string as the name of a folder to create.
Thanks for posting to this thread and help
PX
Firstly, right click and select ' entire representation (i.e. U8), and then right click then select data entry. Uncheck "use default limits" and enter the desired range.
If you have noticed, everything is done by right-clicking. You should be familiar with all the right click options. Did you do tutorials?
-
The user profile Service has no logon (for the 2nd time)
I have Windows Vista, and this is the 2nd time in a few months this product. The first time that I could remedy this by following this tutorial.http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
But I can't do it twice, because I already have a folder with a .bk to the end and the other without the .bak. So I can't rename the files, so neither solutions work. And I can't do a system restore because it screws my McAfree upward. Please can someone help me?
Hello
The .bk is only a backup on the 1st operation comes off so you can listen to.
You can also use .bz (or something else) instead of .bk to this effort. The important
part is to save the old profile before you rename the .bak.BTW, there is a good chance that McAfee is the first cause, or at least getting worse, this question
to verify the message options.----------------------------------------------------------------------------------------------------------------
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Query related to multi site VMWare esxi 5 according to the installation program.
Hi all
We have several distributed sites based on vSphere 5 according to the installation program which are the ESXi host 5.1, 5.1 vCenter and a storage for each site... Now, we anticipate adding distributed locations all host esx to vCenter built one of our new site.
So, what should be the best way to achieve this.
(1) is it advisable to add the distributed over wan to vCenter site on a different location?
(2) can we also go with modes related? Since all our existing site already live, do we need to re - install vCenter to have bound mode installed?
Concerning
Varun Khatri
Hi, as long as you have enough bandwidth between sites, you can add you remote cluster to vcenter. I've done this before and I had no problems. Your approach depends on the configuration of your environment. If you have existing vCenter installed on each site, you can use the linked modes, and you don't need to reinstall to set up connected mode. vSphere Documentation Centre
-
Add new host esxi 5.1 for the existing cluster of vcenter
Hello
I would like to add a new host Virgin esxi 5.1 to an existing cluster from the vcenter. What are the things that I have to preconfigure on the host before add you it? I configured the network already, storage will be implemented when I add it to the cluster, right?
So, what I ended up doing was just set up time, networking and dns. I then added the host while he was in maintenance mode. I have a Compellent SAN storage and im using a folder in compellent to map all my Lun, then I can just add a new host in this folder, and it will automatically map all volumes to the newly added host once I go into vmware and make a new analysis on the FC HBA host (do FC fabric SW zoning first of course). I then added a file .locker on one of my SAN LUNS scrach location/newspapers. She's.
-
several user sign component software plug-in for the mail account
When I start each day, the computer goes directly to my account and e-mail. I would like to have the possibility of another user to choose his account. How do I do that? I'm on Vista and his email is set up and on the current desktop.
You will need to set up a second account of user login and have this person to enter his e-mail in their account.
"bstephen19" wrote in the new message: * e-mail address is removed from the privacy... *
When I start each day, the computer goes directly to my account and e-mail. I would like to have the possibility of another user to choose his account. How do I do that? I'm on Vista and his email is set up and on the current desktop.
-
Choose switch user/group in a line item for the automatic creation of a BP
Hi all
I created two business with workflow process. When I create a topic with the first BP, he auto-créer an account of the second BP. But I have to open the folder newly created to push into the workflow (and choose the assignee)
Is there a way directly choose the assignee to the line item and bypass this step?
Thank you in advance.
Thomas
Hi Thomas, take a look at the controls of the project base SKU BPs (minutes and Actions items specifically). MM topics auto-crée records of HAVE and is configured to support your use case I think... It is using a combination of "previously assigned" on the approval of follow-up action step (assignees = "all users of the project") and also the function "filter assignee" to filter the list of "all the users of the project" down to 1 assignee (based on the value OF 'Login username', i.e. that you have added to the online meeting item minutes that generated automatically during the recording of the AI was created.) Ian
-
startup script of VMware services - correct naming for the VMware NAT Service?
Hello
Because I don't want the VMware services to start whenever I start my PC, I use the following script to start the services manually.
ECHO
the echo of vmware
ECHO
net start VMwareHostd
NET start VMware NAT Service
net start VMwareServerWebAccess
output
Question: net start VMware NAT Service does not work.
Question: what is the correct name of the Service NAT VMware?
Thank you
SJW
Hello
The commanf is incorrect. It should be like this:
net start "VMware NAT Service"
-
For the CIM-BX132, how can I transfer an audio file to a PC?
I just buy a voice recorder ICD-BX132. There is no USB port, and no software or cable provided. How to transfer an audio file to a PC?
Since no one has answered my question, I returned to the store for a refund. I don't consider is the sensitive customer service!
-
I have a professional Windows 7 operating system and have a program that was installed when the user is logged on as a local user. Is it possible to give the same user rights to run this program without having to reinstall the program when the user is connected to the domain?
Thanks for any help you can provide.
Microsoft Answers is for consumers to related issues and it would be preferable for you to post in the following TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads
Sincerely,
Marilyn
-
VMS with VMware Tools ESXi5 works for host ESX4.1?
Hello
Just upgraded a 4.1 ESX host to ESXi 5 host in a Cluster of 3 armies.
We observe that VMware tools running obsolete for the virtual machines on the host ESXi5. We would like to know if we apply the latest VMWare tools on those virtual machines, they run correctly when they are transferred to ESX 4.1 hosts?
Thank you
VMware Tools version 5.0 is compatiable on 4.x, but the virtual hardware version 8 is NOT compatible on 4.x
Se see page 3 what 's new
-
The upgrade of the host, VMware ESXI 4.1
Hello
I am running a host VMware ESXi 4.1. It seems that VMware claims now this product VMware vSphere Hypervisor (am I right?). Was it a name change purely marketing, or they introduce new functions as well? Is VSphere Hypervisor a more recent version of ESXi
Is there a tool to upgrade VMware ESXi 4.1 for newer versions (no matter if their output yet or not, just wondering about the upgrade in general)?
Thanks in advance!
Don't worry, it's all the same. You have the same binary files for all editions of ESXi, it is only the license key that locks or unlocks features. I think that the main reason why VMware decided to call ESXi free edition "Hypervisor" was because many people were confused that ESXi is free or not.
There are two upgrade options ESXi. For the first, you must have a licensed version of vCenter Server, which offers the "Update Manager". The second is to use the command line utility "vihostupdate".
In addition, you can take a look at http://www.vm-help.com/esx41/Patching_4.1_with_the_host_update_utility.php
André
Maybe you are looking for
-
Want to m6 1225dx: hard drive
Whiles run check the system diagnostics (text comprehensive system) he told me that the hard drive optimized DST: software error, check processor: missing module. How can I solve this problem
-
I checked all of the updates and connections for my new printer. As far as I can tell, I've checked everything that needs to be checked and everything is good. But I still have the error of mail delivery when e-printing. And my friend has the same
-
Under XP, I could put pictures in a folder where I want them, and they remained there. Now, I went to Win 7 they insist to keep in order digital alpha. How can I change this please? If both of us are using two cameras each I want the photos chronolog
-
Windows Media Player does not recognize external DVD drive - so how do you watch a movie DVD?
I just connected an external DVD - RW drive in my ultrabook of Windows 8 for the first time. The ultrabook recognizes the drive and the dvd movie which are, but Windows Media Player only - only says: "connect a device". The resolution of the issue
-
How to remove contacts from "people" app in Windows 8?
Original title: Windows 8 will not let me delete contacts from "people" app. I have 8 pro win. I even closed my Facebook account and I can't delete contacts. Windows 8 will not let me delete contacts from "people" app. I have 8 pro win. I even cl