Local VCS-E - Authentication for H323 failure

Similar Questions

• 506th PIX IPSEC VPN allow authentication for local users?

  We have a 6.3 (5) running PIX 506th, configured for Cisco's VPN IPSEC clients. Cisco VPN clients authenticate with the credentials of group fine, but is it possible to use local users to authenicate plu? We use local users to our existing PPTP VPN clients, but we want to migrate these users to IPSEC. Any info would be greatly appreicated.

  Of course, you can... you need to include the command on your card crypto below

  map LOCAL crypto client authentication

  I hope this helps... Please, write it down if she does!

• MOVI authentication for VCS-TMSPE-AD?

  Hi, Expert

  Setup is X7.2 VCS, 13.2 TMSPE with MS active directory as the database of the user.

  The user account has been imported into TMSPE by system > Provisioning > users > Group XXX > import user > configure AD.

  And VCS has been integrated with TMSPE successfully.

  The problem here is how the authentication works? is the user/password full name was imported to TMSPE when importing and then go to VCS? or only modules imported to MSDS?

  I tried the connection, but he also inspired the name of username/password wrong, with logging below, but if I change the user password in TMSPE manully, then it works.

  2012 11-20 T 23: 58:18 + 08:00 VCSC tvcs: elements UTCTime = "2012-11-20 15:58:18, 406" Module ="network.http" Level = "DEBUG": Message = "Request" method = "POST", URL ="http://127.0.0.1:9998 / identification/name/lianzhao information" Ref = '0 x 3985970 '.

  2012 11-20 T 23: 58:18 + 08:00 VCSC tvcs: elements UTCTime = "2012-11-20 15:58:18, 411" Module = "network.http" Level = "DEBUG": Message = 'Response' Src - ip = "127.0.0.1" Src-port = "9998" Dst - ip = "127.0.0.1" Dst-port = '47550' response = "200 OK" ResponseTime = "0.003867' Ref = '0 x 3985970'

  2012 11-20 T 23: 58:18 + 08:00 VCSC tvcs: elements UTCTime = "2012-11-20 15:58:18, 411" Module = "network.ldap" Level = 'INFO': detail = "directory of identity authentication credentials: lianzhao"»

  2012 11-20 T 23: 58:18 + 08:00 VCSC tvcs: elements UTCTime = "2012-11-20 15:58:18, 411" Module = "developer.nomodule"Level = "NOTIFY" CodeLocation="ppcmains/sip/sipproxy/SipProxyAuthentication.cpp(453)" = thread of "SipProxyAuthentication::validateDigestAuthorisationCredentials" method = "0x7f7b9fffd700": calculated the answer does not match the answer provided, calculatedResponse = 6c510983415df744b9fc057cd5315133, answer = bfc97064a7d7e434f1a1d189e59d996e

  For authentication of device using NTLM in integrating MS AD, TMS import user account from the AD server (single user but account not password).

  This account information will export to VCS of TMS as provisioning user account (yet once does not include password).

  When VCS receive application for commissioning of Jabber client video, VCS will challenge ad server password.

  For traffic flow, please see the guide to deploy authentication https://supportforums.cisco.com/docs/DOC-25398 or peripheral.

• RADIUS authentication for the switch using ISE

  Hi guys,.

  Someone did he do Radius Authentication for switch cli connection using ISE?

  We did it in our environment with ISE, but it is a challenge to give read-only access / Priv-1.

  If some users know the enable password, they can use and earn full privilege.

  Anyway to get around this other than to change the enable password?

  We have thousands of switches and won't change on each of them.

  If you have another method please advice.

  Thank you in advance.

  Well, you can set the "enable" function also be controlled via the AAA server with the following command:

  AAA authentication enable... This way server AAA will be checked for authentication for the secret to activate and use the local database as a last resort

  I hope this helps!

  Thank you for evaluating useful messages!

• Local use and authentication AD with ACS 5.6

  I have an ACS 5.6 unit configured to use AD authentication for my default network access and rules. It works very well.

  I tried to implement some features, put them in a group and give only locally defined ACS to users access to these devices.

  Problem, after you have created the local accounts on ACS creates a group of local identity, and trying to authenticate with a camera, I always get "object not found in the identity store.

  Is there a way to have the hybrid authentication like that? How do we?

  Hi Colin,

  One thing that comes to mind is "sequence of identity store. Ensure that you have "internal users" listed in there otherwise that demand would never be mapped against the internal users.

  I also want to double check the source of identity under default device admin or any service that you created. Ensure that internal users.

  Take a look at the document below for more details on the identity store sequence.

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-se...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• For Cloud SGD LDAP authentication for users and administrators

  Hello.

  I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).

  My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?

  We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server?  Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.

  One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.

  I see that when an account is created in the OMS, the user is created in the repository of OMS database.  I really want to restrict not know them to log directly in the database, but do how this is possible.  Can we still use pupbld for this?  Probably not...

  I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.

  But the same year, he was not very descriptive about how to set up.

  It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.

  I hope not, and I do not remember that as an option that I have installed the SGD.

  Configuration of Oracle Enterprise repository to use external authentication tools - 11 g Release 1 (11.1.1.7)

  Yes, you can still integrate with LDAP.   Please see the documentation here

  http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH

  EM use WLS for authentication, so everything that is supported by this version of WLS will work.  Documentation received instructions for OAM/OID/HAD and Active Directory are specified.

  Users can be changed to type external if they are already created in the repository with the appropriate connection name.   Otherwise, new users can be created.

  Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.

• HP20002D19WM came with no software (cyberlink) key and certificates of authenticity for windows

  I just bought the HP20002D19WM, which came with no software (cyberlink) key and certificates of authenticity for windows. I can't use any program cyberlink with a key number to enter. Also if I would give for somereason I wonder in my number of windows I would not be able to since I have ever trevieved it

  This is the original factory specifications for your laptop HP 2000-2d19WM. All Cyberlink OEM software should work without key, because it is not mandatory for the installed OEM mass products. Regarding the Windows product key, see Activation of Windows 8 product;

  • OEM Activation 3.0 (OA3) at the factory. A digital product key (DPK) is encrypted and installed on the motherboard BIOS during the manufacturing process. Windows 8 will be ignited automatically the first time that the computer is connected to the Internet. With systems activated by OA3, most of the computer's hardware can be replaced without the need to reactivate the software from Microsoft.

• How can I inform the operator of the reason for the failure?

  I inherited several TestStand sequences with about 35-40 pass/fail and tests digital limits. The sequence is made to fail if a step fails.

  There seems to be several ways to warn the operator on the nature or the reason for the failure. Everything that happens now is that the Red 'sequence Failed' popup appears, and the operator gets to install UUT following. This example uses the template of "Sequential" standard.

  I am looking or the other

  1. change each affected step and change in 'Action', then adding a step later that displays a message if the stage previous "failed", then fail the sequence. Or perhaps a variant of that, to change the step so he can skip the next step if 'Pass', the next step was to pop the message and fail.

  2. having learned about the UI and then implementation. (Exaggerated this feeling but I'm open to suggestions.)

  Or y at - it another simpler way? I'd just like to bring up a text with suggested corrective action, just before the red notice "Test failed".

  Thank you.

  Take a look at the use of the callback SequenceFilePostStepFailure engine.

  There is an example found in \Examples\Callbacks\PostStepFailureCallback\FailureHandlerExample.seq

• Cannot enable authentication for 802. 1 x

  Original title: I can't change the properties on my wireless adapter to get the authentication of 802. 1 x. I get the error message.

  I get an error message when I right click on my wireless connection. I want to access authentication of 802. 1 x. need help, please.

  You see the error of not being able to find a certificate because you select 802.1 x.

  For a home wireless network, you don't want the box "Enable IEEE 802. 1 x authentication for this network"to check.

  What was the problem that you entered in the Properties dialog box of your first wireless adapter?  Normally, see you the list of available wireless networks, select one, click Connect and enter the password when you are prompted.

  I suggest that return you to the "Wireless networks" tab of the properties of the wireless adapter dialog box (it should look like this) and "Delete" all entries in the list of "Favorite networks."  Then go to list "View wireless networks" and connect from there.

  In addition, the foregoing assumes that you use Windows to configure your wireless network card (see the checkmark in the screenshot linked above).  If you use another utility - that came with your computer or your wireless adapter - you should disable that and activate windows (using the checkbox) or read the guide of the user for the utility to determine how to set up your wireless security.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Test command of the AAA for EAP - TLS authentication for wireless users

  Hi all

  Can anyone suggest me the test command to verify the eap - tls authentication for the Cisco WAP's wireless.

  If it's an authetication jump we can use the command to test the connection below

  Radius of group aaa Testwap-01 #test [email protected] / * / o4 & yJ) NoL$ new-code %0
  Trying to authenticate with the server radius group
  User successfully authenticated

  But eap - tls is not delivered with the password. He insists that for the user name.

  We strive for remote location then test remotely before production.

  If someone help pls in that if we have a command to test or debug command to test this authentication.

  EAP - TLS requires a client certificate. How can you have a simple command that analysis without loading any certificate on the router/switch? It does not exist. This is why eap - tls is not considered an easy to deploy eap method: because it can go wrong on several levels.

  The aaa command test performs a PAP authentication, therefore, it tests the connectivity of the base RADIUS and name of user and password.

  If it works, the only thing that can break for eap - tls are certificates, as well as the radius server will be able to tell if something worng.

• Authentication for wireless access

  Hello

  The independent implementation of a wireless network is configured as authentication open with an TKIP encryption algorithm. The client key management is set to WPA PSK.

  What exacly is authentication for? I see that the MAC and the EAP are available options. These options to block or to allow real wireless devices that connect to the AP?

  The next thing I see is the authenticated Key management Client and I use WPA PSK. Exactly, what happens once I get this PSK from the client? It is used only to encrypt data?

  Thank you

  Kevin

  Hello

  Here is the link to configure the WLC with LDAP for EAP-FAST...

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a008093f1b9.shtml

  About the difference between EAP and PSK, the link I provided in my previous post will help you. different stages through which is involved all its EAP and WPA... Andgoogle search will provide you with several good links as well!

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• Basic authentication for the OSB exposed as a Rest Service

  Hi all

  We expose OSB Service as a Rest Service to the customer. Need to add basic for the client authentication. In the HTTP transport Service proxy, we have enabled basic authentication. However, we do not know how to proceed. We want to take care of the authentication section in the BSO it itself, so what should be our next step for her? How to extract the authentication information for the request and where to add the check? Is there an easy way to integrate with authentication AD in OSB?

  Hello

  OSB will do authentication for you, no need to make something of yourself. Just move the radiobutton control to basic authentication. It uses the Weblogic domain in the to do. OSB will get the name of user and password of the authentication HTTP header property and validate it against weblogic. If weblogic confirms as a name of user and password valid, OSB running the proxy. Any valid user in weblogic will do, there is no authorization: so no way to limit to a specific user. This means that to connect to AD you must configure using Weblogic. In the field of weblogic, you can add any AD or any LDAP as authenticator.

  With the help of its also possible to validate on a particular user using the UserToken GOSA strategy. You can also use GOSA do BasicAuthentication by applying the specific policy. But GOSA only supports basic over SSL authentication, not simple basic authentication.

  By the way: for BA on a Business Service: you must create a ServiceAccount object with the specific user name password and assign to specific BusinessService. You can create a surveillance society by environment, each in a particular folder of dev/test/ACC/prod. Then use a customization file to switch between them.

  Kind regards
  Martian

• Configure Alerts email for hardware failures

  Our ESXi 5.5 environment goes live today and now it will be in production I was wondering if there was a way to configure alerts email for hardware failures. For example, if a disk goes wrong in our RAID array, I want to be emailed on this subject. Is this possible, and is there a link to find out how to implement that?

  Go to the Administration menu-> vCenter Server Settings-> E-mail and enter SMTP server and the account of the sender.