locally managed tablespace and confused fragmentation

Similar Questions

• create the table with the parameters of storage in a locally managed tablespace

  Hello
  Can we create object with the parameters of storage in a locally managed tablespace.
  
  CREATE TABLE my_hash_table_6)
  name VARCHAR2 (30),
  value VARCHAR2 (4000))
  STORAGE)
  INITIAL 1 M
  NEXT 512K
  PCTINCREASE 0
  MINEXTENTS 2
  MAXEXTENTS UNLIMITED)
  
  
  default tablespace users is successful locallly.
  Then extended this table management will be managed according to the tablespace or storage settings which
  has been specified when the table was created.

  Hello

  This means that we don't have to define NEXT, PCTINCREASE, MAXEXTENTS at the object level.
  Then, these settings are applicable to Dictionary managed tablespace or what?

  Yes that's right, understand you is correct

  Can we define NEXT, PCTINCREASE, MAXEXTENTS at the level of the object in the dictionary managed tablespace;

  Yes, you can, but go for DMT, is not very good, because you advantages compared to LMT, just think about it before going to the DMT, than I suggest.

  -Pavan Kumar N
  Oracle 9i / 10g - OCP
  http://oracleinternals.blogspot.com/

• Create locally managed Tablespace

  Hello
  
  Is it possible to create a new locally managed Tablespace in Oracle Database 10 g when the SYSTEM tablespace is managed DICTIONARY.
  
  Thank you.

  Yes, which was always possible since 8i, when SYSTEM could only be DMT but other storage space could be LMT.

  However, you cannot create a tablespace DMT if SYSTEM LMT.

• Migrate from Dictionary Managed Tablespace locally managed - 10g

  Is there a document that indicates best practices to migrate the management measure dictionary managed tablespace to locally managed with automatic segment management space.
  
  I read that we can migrate using the DBMS_SPACE_ADMIN. TABLESPACE_MIGRATE_TO_LOCAL Procedure, but is not very clean because existing data will still use the managed dictionary and new lines inserted will follow the local space management, is this correct?
  
  Can someone please provide comments?
  
  Thank you
  KeV

  Kevin, my personal opinion is that future space management will be much easier for the DBA if the ADMINISTRATOR creates new tablespace by using local management instead converts the tablespaces in place. When the packaged DBMS_SPACE_ADMIN. Procedure TABLESPACE_MIGRATE_TO_LOCAL serves the existing objects are not resized and parameters such pctincrease are still in force. Convert the tablespaces bring their problem of fragmentation of space with them.

  New start. Also if you want to use SAMS you put on when creating tablepsace so new is necessary in this case. ALTER table move and alter index rebuild are an easy way to move most tables/index to the new tablespace. The old exp/imp can be used for objects with long columns.

  I saw the free space fragmentation problems in a tablespace which was not converted-allocation automatic. The use of auto-allocate will considerably reduce the likliness of a problem free space fragmentation, but in some cases, you may still experience the problem.

  HTH - Mark D Powell.

• Re: URGENT: SIZE SINGLE Tablespace before crossing to locally managed

  Hello
  
  Storage space in one of our production databases are managed locally.
  
  Is there a way to know if the ONE SIZE was used when these storage spaces have been converted from the dictionary locally?
  
  Please let me know as soon as possible!
  
  
  Thank you very much!
  
  Kind regards
  
  A

  Hello

  What I need to know if the single size WAS used until the storage spaces have been converted to managed locally.

  Sorry, I did not at first that your Tablespace has been migrated from DMT to LMT. My post was just for newly created LMT.

  Yes, formerly your Tablespace has been a DMT. There is no extended UNIFORM allowance for this kind of Tablespace. UNIFORM and SYSTEM apply only to newly created LMT.

  Increasingly, after having migrated from DMT to LMT, extended allocation rest USER ( DMT ).

  You will have more details on the following Note of My Oracle Support:

  Next Extent Size After Migrating Tablespace from Dictionary to Locally Managed [ID 120061.1] 
  

  For example, if you want to check the size of the scope in the (migrated) Tablespace you must query DBA_EXTENTS (column bytes or blocks) view for all extensions inside the storage space.

  Can be the size of the scope is all the same. It can occur if a default storage has been set on the DMT with INITIAL = NEXT and PCTINCREASE = 0 and/or any other Storage Clause (with INITIAL = NEXT and PCTINCREASE = 0 ) has been set to the /Index of tables created in this table space.

  Hope this helps.
  Best regards
  Jean Valentine

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Manager profile and updates the server imacs

  We are new to this rehabilitation so much ignorance.  We are implementing in our public library 30 off a server imacs mini mac OS X Server (El Capitan).  We have MDM, VPP and the Profile Manager.  Using the Profile Manager, we can get the updates for the programs Apple or operating system to deploy about 30 imacs.  Imacs keep asking apple ID and should not do.  Since these imacs will be out for use by the public, we don't want people by connecting you with their own accounts on itunes/icould kind are locked down, so the updates that need to be pushed from the server.  We followed all the directions in which we can find, but so far without success.  Anyone know the answer?

  Thank you.

  Susan Dillinger

  Director of the library

  New Port Richey Public Library

  Hi Susan,.

  Welcome to the forums.  If you are one of those borderline cases where the VPP doesn't really help.  As you deploy systems of shared use, and as you said, you don't want visitors enter personal data on the machine that are public terminals, they does not really benefit you in the collapse of the licenses in the VPP program.  VPP works very well if you have unique Apple IDS on each of these devices and each device has a user invited to the VPP.  But, I guess, you have a local administrator account and possible you are exploiting the guest account or using something like Deep Freeze to protect the machines of significant change.  If this is the case, the last thing you want to do is to manage manually 30 Apple ID each machine which means you would end up with 30 catalogues of app store.  Messy.  And very manual.

  You can provide compliance with the VPP program (you have 30 licenses of each application), you will probably have to fudge the distribution of the software.  For example, the last update to iMovie.  You bought 30 Apple machines.  Each machine came with an individual license of iMovie.  You converted to the VPP seats.  Ah, but you do not have 30 users to invite to the program to claim each seat.  I suggest you fudge it a little as you can always stay in compliance.

  Download the update for a single machine.  Suppose that you have a "master".  It could even be your server.  Patch iMovie on this machine.  Then, use a tool like Apple Remote Desktop (retail $ 80 on the App Store) to push the App update for 29 other machines.  The application is nothing more than a bundle of the application.  You don't need to do something special for the app get her as a source in the functionality of the copy of the elements or the ARD.  Now you download the application once on the internet and put it on other devices.  Bind the iApps a identifier Apple is a thorn in all shared device deployments.  The key is to stay in compliance of the software.

  Don't forget.   The Profile Manager is any device monitoring and management parameters.  The Profile Manager can not deliver software to devices.

  I hope this helps.  Looks like a good library to have 30 ready to use Mac.

  If the children are, I would suggest installing zero from MIT, Lego Digital Designer Lego, Meshmixer from Autodesk and even the unity game engine.  All are free tools and can provide interesting opportunities for youth programming.  Scratch for the Foundation in computer programming, LDD for the architect budding in each of us (and it's Lego), Meshmixer is a modeling tool from Autodesk, which is free and the unit for those adolescents who are seeking to build their own games.

  Oh, and you should probably set a firmware password or activate the full encryption of the disk on machines to prevent visitors curious to play with your machines.  Encryption will require a member of library staff unlock the device at each reboot.  Who can get boring.  A firmware password would be only necessary if someone was trying to use modifiers to boot (which is what you're trying to prevent).

  These Macs can open up unimaginable avenues of learning for your community.  Be creative.  Push the limits.  Don't let them collect dust.

  Reid

  Apple Consultants Network

  'El Capitan Server - Foundation Services.

  «El Capitan Server - Collaboration & control»

  'El Capitan Server - Advanced Services '.

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• tablespace and data files not synchronized

  Hello
  I'm under 10.2.0.1.0 Oracle instance.
  got an error like:
  
  ORA-01652: unable to extend segment temp of 128 in tablespace TEMP.
  
  resolution, I've tried:
  I added 2 database files each of 2 GB in TEMP tablespace.
  
  then I re-run same query got the same error message.
  
  On OEM, the TEMP tablespace and data files that it contains are not synchronized.
  
  When I added a few .dbf in tablespace TEMP it has not yet calculated space and space occupaid.
  
  Is anyway I can make TEMP tablespace and .dbf in tablespace TEMP in sync... ?
  anyhelp is fine
  I'm stuck... ?
  
  Thank you
  JP

  Hello

  You should have added tempfiles and not the datafiles, right?

  Why didn't you not adjust existing files to autoextend on? And you can try adding space via Enterprise Manager itself.

• When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  Check that you have not set multiple home pages.

  You can find the homepage here:

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Firefox supports several home pages separated by ' |' symbol (pipe).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy

  How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy.
  It also serves as the sites I want to keep are my favorites
  Is there an alternatively an add-on for this

  Hi Wayne_a,

  If you are concerened about your privacy you can turn off this feature:

  Disable the new tab Page

• I have manually manage music and videos manaully just only manage videos. What should I do

  I have manually manage music and videos when I connect my iPhone to iTunes, but only manually managing videos. What can I do to fix this

  You use Apple music or iTunes game? With the iCloud music library active on the device, all your library is available and you choose what to download for use offline on the device itself.

  TT2

• iTunes "manually manage music and videos" option cannot be deselected.

  I changed my options on iTunes and now I can not uncheck "manually manage music and videos". I tried to uncheck and then clicked 'Apply' and after that, there is still not controlled. The first image shows the option checked. Picture 2 shows that "manually manage music and videos" was unchecked and I clicked apply. After I clicked on apply "manually manage music and videos" remains active. I want to know how do I uncheck "manually manage music and videos" and keep it unchecked. Any suggestions?

  

  

  What should I options you checked in the SETTINGS > tab MUSIC?

  Sync music checked?

  Entire library of music?

  Selected playlists, artists, albums and genres?

  Is probably a dependency between these parameters.