Location of loading on WCS software
Hello
I try to load the software on WCS location via the WCS interface and not CLI device and I'm running into some problems.
I am currently on version 4.1.83.0 with location and 2.1.39.0 on the location device.
The device's sync would be with WCS, but every time that I try to transfer new software, I get the following error message:
Error: Unknown Exception occurred. If the problem persists please send logs to technical support
I tried several versions and I am following the guide of upgrade on CCO is not very good
I'm confused at what you're trying to do. This new software you are trying to load? the code?
-What are you trying to do?
http://www.Cisco.com/en/us/docs/wireless/location/2700/quick/guide/li31main.html#wp1048000
Tags: Cisco Wireless
Similar Questions
-
Error code 101-752 dotnet framework error, problems to load the new software of the printer
Error code 101-752 dotnet framework error, problems to load the new software of the printer
Hello
(1) have you made changes before the start of this issue?
(2) when you get the error message?
(3) is the specific question of the installation of the printer software?
(4) what is the brand and model of the printer?
It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.
Fix the .net Framework installation
http://support.Microsoft.com/kb/976982/en-us
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows
See also:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Let us know if that helps.
-
Locate and load drivers for devices on the XP laptop.
I have an older laptop that wouldn't start, I ran the module to repair XP on the installation disc where I replaced the files by following the instructions in the repair folder to the system32 folder. Then the computer started properly, but I have no internet connectivity. It is said that he finds the wireless network but will not connect. I checked Device Manager and several devices have no pilot, including the ethernet Controller, the wireless network adapter seems to work correctly.
As it is a laptop plus I have not any driver disks. I think that are on the hard drive somewhere, but do not know where. Can anyone help to locate and explain how to load. Thanks for any help.
Hi vincekame,
· You get the error message?
Follow these methods.
Method 1: Follow the steps.
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Follow the steps in the article.
Windows wireless and wired network connection problems
-
Could not load the Lego software using a student connection
Hello all, I tried to get the Lego factory software shipped to work on our network (we are a school and use s RM CC3 network). I was able to get the package to work correctly for a user admin (full access to the local computer), but to us this software as a student, I get the following error. "Error loading ' fantom.dll initialization routine"A dynamic link library (DLL) has failed. " This error, as the software does, and then it breaks down before opening the main program. If someone could give me an idea what permission to give in the case or a solution on how to fix this? I have not downloaded the Toolkit or any additional software for the moment because if it is possible I prefer to get this work with the standard software. Thank you very much in advanced, Richard
Hello, we have solved the problem, we installed the software a differernt way and now, which seems to be working properly it could have been something wrong with the installation after all. It wasn't flaged, because it worked for an administrator.
Cheers for your help tho.
Soluition here: http://communities.rm.com/forums/posts.aspx?postID=45586&postRepeater1-p=2#58046 by Alex Hart
-
I am trying to load new software on my computer but it keeps asking for a password for security and I do not have a password! Can I put this somehow?
Maybe he wants your administrator password.
It is the MSE Forum and is not a question about anti-malware Microsoft Security Essentials (MSE) program.
Suggest that you post your question in the appropriate forum for your operating system: http://answers.microsoft.com/en-us
-
Reference Dell XP will not load hp Camera Software
I have a camera digital hp 2004 bought 935. I have an old dell for 5 years with xp. The computer does not allow me to load the software for the camera. I even downloaded from the hp website. Now, it appears on the desktop, but when I try to launch an error in a box. Would be very happy to help.
Have you checked the HP site of the clues as to what the problem is, for example:
Use the workaround or try to update the software.
-
After installing windows vista sp2, lost all the sound elements, when I try to reinstall I have error "driver has been installed correctly, impossible to install the software for this driver... when I tried to use windows update, 800703e6, invalid access to memory location error I received...
You will have the good idea after viewing this thread. http://www.Vistax64.com/sound-audio/291850-no-sound-error-800703e6.html
-
Error loading of the software hive
Original title: the hive errror vista
I dropped my laptop fro windows loading screen took a few minutes and then I got a message saying stop: c0000218 (registry file failure). The file of registry cannot load the hive (file): \systemRoot\System32\config\SOFTWARE or its lof or replacing. It is damaged, missing, or not accessible in writing. How can I fix this if possible without a hardware replacement. UPDATE: I made an attempt to reinstall windows I get settings for windows loading and I get the loading screen of windows 7 and that a black screen with the cursor nothing happens at all so is this a hardware problem?
Hello MTK1988,
If we are still having problems with the Software hive, let's try the following:
- Start to repair the system and choose command line.
- Type the following commands:
- z:
- cd\windows\system32\config
- Ren software software.old
- ren system system.old
- Regback CD
- Copy the software z:\windows\system32\config
- copy the z:\windows\system32\config system
- Reboot and see if we are able to start Windows.
Please note that if there is no directory regback, we should type the following:
- Ren software software.old
- ren system.old system.
Let us know if that helps.
Best regards
Matthew_Ha
-
Trying to find out if my software work and what happens if I load the wrong software?
Just ordered my HP Pavilion yesterday so I have not yet used. Some the sofware as 'Adobe Photoshop Elements 7' which is on my xp desktop I want to load on my new laptop. On the side of the box does not list windows 7 but it does not list xp and vista. Any chance it to load on my new laptop? If I try, what happens? Don't want to spoil it but would really like my software on the laptop.
Hope I did this right, my first post.
Adobe Photoshop Elements will require that you enable XP compatibility Mode to operate. He will not be fully functional. You should probably check the Adobe forum for problem with their software
Best regards
Eric
-
Hello:
I went on the Blackberry site and loaded the carrier ATT page software, Desktop software, it's on my computer, but when I plug my BB I can still see the white screen with JVM 513 error and the Director of office gives me again - no request is available. How can I get the software to reload on my BB 8310.
Please help, I don't want another phone, I like this one.
Thank you
Ladylaresa67
Can be accessed through this site
http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp
-
"Cannot locate the installation of the software.
I try to install cx-oracle so that I can use the Django framework with an oracle database. but when I try to install it, it gives me this error
bcalderon@bcalderon-desktop:~/Oracle/cx_Oracle-5.0$ sudo python setup.py build
Traceback (most recent call changed):
File "setup.py", line 123, < module >
raise DistutilsSetupError ("cannot locate an Oracle software"------)
distutils.errors.DistutilsSetupError: could not find an installation of the Oracle software
any help would be greatly appreciated. I think that perhaps Oracle database 10g Express edition has not installed properly or something. but I reinstalled like 3 times now and it made no difference.CX-ORACLE
Oracle 8i developed by Computronix interface. [Open Source, BSD-like]I suggest that you join the 21 ^ st ^ century & not worth it with the 8i.
Install Oracle XE placePublished by: sb92075 on July 29, 2010 11:08
-
I am currently a student on a course of Japanese language. I use a homemade computer and it runs under Windows XP. I would like to be able to correspond with people living in Japan, with Japanese text (Hiragana, Katakana, and Kanji). I understand that I need a MUI (multilingual user interface). Is it possible to install the software on my computer? Another possibility, what is the most effective way to achieve this? I live in England and computers do not come with this already installed. -Thanks in advance - Fred.
You are Windows XP Home Edition? or professional?
If you run Professional, you can follow this link to download a MUI
-
XP Pro cannot see my Garmin GPS, not able to load the new software
When I plug the device via the port USB port unit starts, and that's all. Cannot see it in my computer, or the files of the menu drop down.
Hello
1. were you able to use this device without any problem before?
2 did you recent hardware or software changes to your computer before this problem?Try to update software for Garmin device.
Reference: http://www.garmin.com/garmin/cms/site/us/support/
See also the articles that might help you.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-usTroubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway
http://support.Microsoft.com/kb/952607
GPS and your Windows XP laptop
http://www.Microsoft.com/windowsxp/using/mobility/expert/ballew_03may27.mspx -
WHERE CAN I DOWNLOAD A COPY OF WINDOWS 7 MEDIA CENTER FOR MY OPERATING SYSTEM WINDOWS 7?
You can't download unless you run Windows 7N. Media Center is an essential component of all other editions of Windows 7. But you can unload and then reload.
Unload 1 Media Center - Panel, programs and features, [left] turn turn Windows features on or off, characteristic of the media, Media Center clear box, Yes, OK, restart the PC.
2 reload Media Center - Control Panel, programs and features, [left] turn Windows features on or off, multimedia functions, the Media Center of the value checkbox, Yes, OK, restart the PC.
At the end of this, you will actually have a new installation of Media Center.
-
Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll. can someone tell me how to solve this problem?
I have windows xp 2002 Service Pack 2
Hi henryjeshom,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Uninstall and reinstall the application of Turbo tax.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
If the problem persists, contact support for Turbo tax for more help and information.
Maybe you are looking for
-
can I change the background of an invitation card or thank you?
Can I change the background of an e-mail message so that it looks like an invitation card or thank you?
-
Why can't I view the statistics of players in MSN games?
Original title: why cant I find statistics of players or mine. I can't view my msn game statistics or other players. The players seem to sign when they do not. How can I activate my statistics?
-
BSOD when the htc Desire as drive connection
Very often, I get the BSOD when connect my HTC DESIRE phone to my VISTA 32 as a reader. It seems to me that the USB drivers do not well behave. So I uninstalled the PC all the drivers the HTC and the HTC sync, but no difference. I read on the interne
-
Pavillion 500-336: powerDVD LOST 12.
I have a new 500-336 Clubhouse when I tried to update the cyberlink powerDVD 12, somehow during any new request to delete the old version to install the new version I did it, but I never get the new version, so I lost the old version, and I can't fin
-
Vista boot problem-do not start off normally
All of a sudden my laptop running Vista home premium stopped starting after a normal shutdown. Auto repair can not solve this problem, nor done restoring, check disk comes back ok, repair of the original disc also fails, rebuild the startup file did