Location of SSL certificates

Similar Questions

• How to accept a new ssl certificate in Thunderbird?

  7.15.15
  I can't get or send emails on my cell phone two days ago.
  - Neither the "Configuration Options for certificates" worked to bring in the certificate that I use that allows you to send and receive e-mail. Under the "Digital Signature" or "Encryption" when I press "Select" to select a certificate, I get the pop-up message "Certificate Manager cannot locate a valid certificate... ». When I press 'View certificates' certificate that I use is listed under 'Servers' and the 'authorities' and is up to date.
  -In addition, under Tools - Options - Advanced - certificates for: "when a server requests my personal certificate", I selected "Ask Me every time" and left "query OSCP responder servers to confirm...". ', the box is checked.

  I think that this problem is bound to accept a new ssl certificate has been recently renewed. I've never had this problem before. How to start accepting a new certificate?

  Thank you.

  No you can not communicate with the server using a common product of Mozilla. In a short while you will not be able to co interact with it with any product. The operator/administrator of the server needs to fix their server to issue certificates 1024-bit or better. Or stop using TLS.

  The best explanation of this change and it's because I've seen is here https://weakdh.org/
  (right at the bottom of the page is what you need to do stuff)

  In essence, that the server does not have a security flaw serious patched and Mozilla products have been modified to not interact with servers that have not corrected the vulnerability. Vulnerability leaves you open to man in the middle attack on piracy.

• ACS 3.3 invalid or corrupted SSL certificate installed

  Hello

  I installed a new SSL certificate to replace the old one which was about to expire. After this update of cert, I can access is no longer the ACS server for admin purposes. I get the error "cannot establish connection cifered because the certificate presented by is invalid or damaged. Error code:-8101 "or something similar that the message is in Spanish.

  I tried to restart the CSAdmin service without success. I also watched ath the different CS tools but none of them does this nor is the Guide to GBA.

  Is there a way to remove the certificate from the command line or other?

  AY help would be appreciated because I don't want to reinstall/rebuild the server.

  Thank you

  Niels

  If the EC is 3.3.4 or below then it can be disabled through the registry. 4.x do not have registry settings to tweak.

  For 4.x

  A possible workaround we have is that if a GBA backup taken prior to activation of the HTTPS is there, we can restore the same and work around the problem.

  For 3.3.x

  To restore access using http on your server, you must change the registry setting

  to disable the https. Here's the location of the key "reg":

  HKEY_LOCAL_MACHINE \SOFTWARE \Cisco \CiscoAAAv3.2 \CSAdmin \Config \HTTPSSupport

  Change this value from 2 to 1.

  Kind regards

  ~ JG

  Note the useful messages

• Windows 2000 SSL certificate export

  Hi all

  I am trying to export the certificate SSL in Windows 2000 server that is running Cisco ACS 3.3. This SSL certificate is issued by a third-party CA. This certificate is issued by CA bound our server host name. Thus, this certificate can be reused on another server with a different host name.

  I followed under the installation program to export the certificate since 2000 planter

  [1] start > run > Type "mmc" and press ENTER.

  [2], click on Console > Add/Remove Snap-in...

  [3], click Add > certificate > add > computer account > next > Local computer > finish > close > Ok

  [4] expand Certificates > expand Trusted Root Certificate Authority and select certificates

  [5] select the certificate CA ACS, right click > all tasks > export > next > select ' encoded in Base 64 X.509 (.) REB)' > next > Browse

  Choose the storage location and give it a name.

  Press next > finish

  We should get a message "export was successful."

  After the export of the certificate in the CERTIFICATION AUTHORITY folder ROOT of TRUST based on the name of the seller. I could see that the certifcates are self-signed certificate. This certificate is not valid certificate approved in the sound emitted by the CA.

  My Question is: If this certifcate issued by 3 third party trust will be located in a different folder outside the ROOT of TRUST certificate folder. If the folder in which this certifcate trust will be so now.

  I'm checking the certificates of

  published by:

  issued to:

  SE signed certifcate times issued to and issued by is even

  SETTING SNAP SHOT of certifcate MMC window.

  Hello

  ACSCertStore is a record of the certificate created in the MMC - folder of the server certificate.

  I hope this helps.

  Kind regards

  Anisha.

  P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• Failure of the conversion due to SSL certificate problems - can work around this problem?

  I began the process of migration of a collection of virtual machines in an environment of KVM to an existing cluster of vSphere and try to use the converter (5.5) do a dynamic conversion/migration of a Ubuntu box, but it does not reason create the virtual disk on one of the hosts because of the SSL certificate, and I found no other messages or articles specifically on this (looks like most associated with SSL include improving speed)

  In the worker newspaper, I can see that:

  • The converter is able to successfully create the target VM
  • The attempt to create the virtual disk is defective for the certificate SSL is not invalid (all systems in the cluster appear to be using default certificates from VMware).  In the log file of the worker:

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL_IsVerifyEnabled: failed to read the registry value. Falling back to the default behavior: verification on. LastError = 0

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL: SSL unknown error

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] SSL: connection failed

  2014-08 - 07T 09: 35:13.947 - 07:00 [warning 06620 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: The certificate of the remote host has these problems:

  ->

  -> * The host certificate chain is incomplete.

  ->

  -> * unable to get local issuer certificate

  2014-08 - 07T 09: 35:13.947 - 07:00 [info 06620 'Default'] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  • The goal of the virtual machine is removed.

  Is it possible to simply disable the validation of certificate for this process?  In the newspaper, it looks like a registry key that it would control, but I have not found any information on this subject (or guessed correctly).  Or can I import this certificate on the local Windows system running converter to get around it (I could not with this approach, but either)

  It's really not clear to me which system validation.  While the worker log shows it connect to the vSphere host, there is no such line indicating it connects to the host where the target VM is located, and it looks like this is the host with the certificate which is considered not valid.   Validation occurs not on my local system running the converter? (the parameters of the vCenter server shows that the box 'vCenter requires a verification of certificates SSL host' is unchecked already)

  Thank you

  Scott

  You might want to take a look at Re: an error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination and let me know if it works for you.

• SSL certificate tool Automation error level 3?

  So I'm working out KB 2041600. I'm trying to update the certificates on two servers separate vCenter and I get the same error "can not determine if the inventory Service is registered with Single Sign-On - errorlevel is 3" while improving my certificate inventory. "." See full changelog below *.

  I am 100% positive that my certificates are correct. I used Derek Seamons scripts in the past to generate my certificates and it has worked for other vCenter servers. I have completed step 1 and replace the certificate for the SSO. I'm just stuck in the service of the inventory now. I opened a case of pension as well.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 1

  [Thursday June 26, 2014 - 14:51:26.61]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  [Thursday June 26, 2014 - 14:51:57.01]: update of the last confidence Inventory Service operation to

  Single Sign-On completed successfully.

  [Thursday June 26, 2014 - 14:51:57.01]: go to the next step in the plan, which was received

  Scheduler of update steps d.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 2

  [Thursday June 26, 2014 - 14:53:50.92]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  [Thursday June 26, 2014 - 14:54:23.93]: update of the last confidence Inventory Service operation to

  vCenter Server completed successfully.

  [Thursday June 26, 2014 - 14:54:23.95]: go to the next step in the plan, which was received

  Scheduler of update steps d.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 3

  [Thursday June 26, 2014 - 14:54:47.90]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  Enter the location of the new stock Service SSL cert file (default is):

  C:\Certs\Inventory\chain. (MEP):

  Enter the location of the new private key of Service inventory (default is: C)

  (: \Certs\Inventory\rui.key):

  Enter the SSO administrator user (default value is: admin@system-doma)

  in):

  Enter the SSO administrator password (not displayed):

  [.] WARNING: Certificate ' CN = vcenter01.burdweiser.com, OU = vCenterInventoryService,.

  O = Burdweiser, L = Houston, TX, C = ST = US signature uses low one-way hash (SHA

  (- 1). In a secure environment, it is recommended to use SHA2 256 or higher has

  algorithm of h.

  [.] The supplied certificate string is valid.

  [Thursday June 26, 2014 - 14:55:14.12]: last update of functioning inventory Service SSL cert

  ificatsanitai re has failed:

  [Thursday June 26, 2014 - 14:55:14.14]: unable to determine if the inventory Service is registe

  Red with Single Sign-On - errorlevel is 3

  In my case, I was trying to replace the certificates before an upgrade from 5.1 to 5.5. The easiest route taken was to uninstall SSO and the inventory service and then proceed to the upgrade to 5.5. After that, replace the certificates.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2057340

• CA-signed SSL certificates on vCenter 5.1 installation (server or device)

  I recently updated my 5.0 to 5.1 ESXi ESXi hosts and they all kept CA-signed SSL certificates that I installed previously. I did a new install of vCenter 5.1 server where the box even ran SSO, inventory, vCenter Server and Manager Update Services. After installing, everything worked perfectly except that none of the vCenter services used my CA-signed SSL certificate - only 5.1 ESXi hosts had these.

  So, I followed the instructions in replacing default vCenter 5.1 and ESXi certificates PDF found at http://www.vmware.com/resources/techresources/10318. The document is terrible. For example, page 10 lists the locations by three default certificates SSL on Windows 2008. None of these paths are correct. The first a typo of extra space between "Program" and "Data" and the other two say "Program Files" when they should have been "ProgramData". This is just the beginning of the problems.

  If you follow the instructions to the letter, you'll break vCenter. I got frustrated and thought I'd give the vCenter 5.1 device a shot. With regard to the Certificates SSL signed by CA, it was worse. The vCenter 5.1 device can even automatically generate a new SSL certificate if you change the host name (turn on generation auto-certificat, change of hostname and restart). It gives an error 653 during the boot process and keeps the original of the certificate. Even bother trying the steps on page 18 of the above-mentioned guide - you will get just the same mistake 653.

  It seems to me that VMware did not all tests around the CA-signed SSL certificate on vCenter 5.1 installation. It's amazing to me that the installation of the SSL certificate is so tedious for ESXi and vCenter when vShield Manager 5.1 has a very simple process that works well (and is similar to the installation procedure for Certificate SSL on the DRAC, ASR, breeding various firewalls, etc.).

  I did a lot of research on Google and found various articles on the installation of the SSL certificate, but most were based on GA pre - 5.1 products. If you have any installation of certificates SSL CA-signed success with vCenter Server or device 5.1 GA, let me know how you got around some of these issues. Please indicate if your vCenter Server or device will run on a 5.1 GA ESXi host as well. Please do not answer about vCenter 5.0 - I had no problem with SSL certificates (other than it was more painful to be).

  Thanks in advance,

  Nate

  Finally I managed to install giving him to 127.0.0.1 instead of the period of INVESTIGATION, accessible from the outside of the vCenter server, it's very well in my case the vCenter and VUM server are on the same VM but its not exactly ideal for deployments of more large.

• Firefox for Mac does not recognize a valid SSL certificate

  Firefox for Mac does not recognize the SSL certificate that is valid for this site, I got: https://www.georgeglazer.com. It gives a warning "not reliable." However, the Firefox for Windows does not give a warning. This happens even if I clear the cache and it happens in the Mavericks and OS of Yosemite. The certificate is up-to-date and with Comodo. Firefox for Mac is now the only browser producing these errors (v. 39, put updated) - Internet Explorer, Safari and Chrome are not. Our hosting provider has said it's probably a browser issue, perhaps having to do with intermediate certificates in Firefox being obsolete. I really hope you'll solve the problem, as it's annoying for us when we're going to do right by our customers and pay for the SSL certificate. I have attached a picture of the warning and the other from what you see on a PC: a pop-up that says it is a verified SSL certificate and gives details about the issuer, the period of validity, etc.

  COMODO should you sent a link to download the file 'bundle' containing the intermediate certificates. Who needs to go in the same directory as the certificate of your site. If you are using a control panel, your host can probably help with this process. And if you bought through them, shame on them for not taking care of this for you already!

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• Thunderbird does not recognize a self-signed SSL certificate

  Dear support,

  I have a very strange problem that I don't understand.

  I run a server ISP offering IMAP and TLS/SSL HTTPS encryption. Both services use the same SSL certificate issued by RapidSSL/GeoTrust Server edward.ennabe.de

  When I open an https connection to the server, Firefox correctly solves the certificate chain and use the certification authority root Equifax (which is correct).
  However, when I try to connect to a mailbox via Thunderbird, all I get in the hierarchy of certificates is my server edward.ennabe.de. I don't think that it's "working as intended", or is it?

  Is something wrong with my Thunderbird or My Dovecot configuration? What is really strange that firefox recognizes it correctly.

  Thanks in advance

  Kind regards

  ZeroEnna

  In Thunderbird, click the 'Détails' tab in the display of the certificate.
  See all certificates of CA listed in the field "Certificate hierarchy" also installed in your Thunderbird certificate store?
  When checking this look for the tab 'authorities '.
  If there are no certificates listed in the missing chain in the Thunderbird certificate store (for some reason any), you can try to export it in Firefox and import them into Thunderbird.

• SSL certificate not used for Admin Server connections

  I have a GoDaddy SSL certificate installed on OS X Server 10.11.4. It works very well for the web server (https). Connection via Server.app off-site, produces a warning SSL and self-signed certificate. There is a related error regularly in newspapers:

  [[servermgr_certs]:-[CertsRequestHandler(KeychainOpenSSLExport) exportIdentity:]: SecKeychainItemExport (certificateChain) no certificate string available, defaulting to a cert leaves only

  Any suggestions? I reinstalled the cert...

  You must raise the.app of 3rd party certificate.  Follow these steps:

  1: Open Keychain Access.

  2: select the system Keychain in the keychains list.

  3: find the preference of identity com.apple.servermgrd and double click it.

  4: select your SSL certificate 3rd party in the contextual menu of preferred certificate.

  5: Press the button Save changes.  You will be asked to authenticate.

  6: restart the server or restart the process of servermgrd to activate the changes.

  Now when you connect to the server from a remote device using.app, sign in using your valid 3rd party SSL certificate and avoid mistakes.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• SSL certificates - sec_error_unknown_issuer

  Difficulty already in your browser. Get these SSL errors on all other sites starting to get really annoying! There is nothing wrong with SSL certificates or sites. It's your browser that is unable to verify certificates.

  http://i.imgur.com/52qSNXt.PNG

  Latest addition to sites that do not work: https://www.inspirepay.com

  The latest browser causing nothing but trouble for customers.

  Language edition. Please see the guidelines and rules of the Forum

  Quote: the browser should come with all certification authorities

  Note that Mozilla has a strong policy to decide that the CA registration certificates root.

  • http://www.Mozilla.org/en-us/about/governance/policies/security-group/certs/policy/
  • http://www.Mozilla.org/projects/security/certs/pending/

  The required intermediate certificates must be send by the server to make it possible to build a chain of certificates ending in a root certificate.

• The e-mail application does not connect to the Dreamhost servers. Perhaps because of how they configure their SSL certificate for their subdomains.

  http://wiki.DreamHost.com/Certificate_Domain_Mismatch_Error

  Certificate SSL of Dreamhost for their mail servers only at one level of subdomain while many of their clusters of e-mail exist on a second level subdomain. In my view, this translates into an error message 'bad security' of the e-mail application.

  I contacted DreamHost and they say they are unable to solve this problem, or that they will allow me to install an SSL certificate on my virtual domain pointing to my cluster e-mail (even if I had to buy a).

  I understand, it is possible to manually add certificates via adb in a way similar to this: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/

  However what I read this: 1. does not work on the ZTE Open 2. Can only fix only navigation not the web mail client.

  Is there any option that is available to me short of switching hosts?

  Fabian,

  Are you familiar with Firefox OS? The reason why I say this is because the e-mail client cannot create an excaption certificate. In fact, it's design. It's design: https://wiki.mozilla.org/Gaia/Email/Features#Security

  This request for support to Mozilla was placed specifically for the product Firefox OS, for which there is only a single mail client.

  That said many people in the Mozilla Bugzilla, have been able to show me how to find another alias for those servers that actually works and in fact corresponds to SSL certificates. Although Dreamhost support could not provide me with any such information, and such information is not actually in the DreamHost wiki.

  I have a repeated insistence of Dreamhost possibility I should just live with the exceptions of SSL certificate, when there is real existing valid server names to match the certificates in question, silly.

  The fact that you post this solution for one product, so that it is not yet applicable beyond useless. It serves to muddy waters.