Location of the queue

Similar Questions

• Under XP, cannot delete a document located in the print queue

  Cannot delete a document in Quebec to print

  now I can't print other documents

  The best way is to stop the spooler, delete the queue and restart the spooler:

  Open a run window (Windows Logo key + R), type cmd and press ENTER. Now type these commands, which are in uppercase for clarity only, also note the spaces in the commands:

  NET STOP SPOOLER and press enter

  DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press enter

  NET START SPOOLER and press enter

  EXIT and press enter

• Problem with the queues

  I have two sensors on a conveyor that will determine whether an object should be rejected or not. Another sensor is located at 80 cm distance where the object will be launched the conveyor. I learned to use the queues, but have had no luck so far. Could someone explain to me how they work and if possible, post an example of code pretty much my conveyor system? Thank you!

  Think of a queue as a line in the film. People come, they get online. When the person who sells tickets is ready they get the first person online and sell a ticket. Like many arive, they will get at the end of the line. This process will continue until there is nobody left online. The ticket seller will always be the person at the front of the line and new people will be placed at the end of the line.

  There are provided with LabVIEW examples that illustrate the use of queues. Use the finder of the example and the search for queues.

  With regard to your situation in more detail would be necessary in order to give the best advice.

• Printer is printingjob in the queue and new jobs keeps printing how to remove all the tasks in the queue? Have a lot of

  Have a lot of jobs in the queue and would like to erase everything and start a new.

  I don't see why you have posted in the forum Feedback, so I moved your post to the windows 'Hardware and drivers' forum.  Please return to your message, click Edit located just below, change the drop-down list of the Windows Version for your version of Windows, then click on submit.

  Click Start > settings > printers and faxes or start > devices and printers.  Double-click your printer.  Depending on your Windows version, you will also need to double-click now 'See what's printing', click Printer > cancel all Documents

• the queue item will not dequeue

  I have some time that reads just a loop telnet connection data.  Channels fall on this topic and fit into a queue called him telnet.

  I have a separate loop which jumps out of this queue for the treatment of the elements.

  What I find is that there is some channels that get queued, but never stand to be removed.  Here is a screenshot of the enforceable part of the code:

  

  I put a breakpoint on the line item in the upper loop.  I then start a process that sends 2 channels via the telnet connection.  The upper breakpoint triggers and I see string1 to probe #12.  I still (i.e., click Pause) and I see string2 to probe #12.  Immediately after, the breakpoint around the outdoor structure case hit, but probe #11 has only 2 chain, never of string1.

  Am I not manage these queues correctly?

  Thanks in advance

  It is difficult to debug when you can see a part of the code.

  But your thread queue of telnet is splitting off and going to a third location all the way to the right and between the two loops.  What is happening with the wire of the queue there?  You have an other dequeue?

• HP 8500 of print jobs stuck in the queue, diagnostic control OK

  HP 8500 A909g connected by USB cable to the Windows 7 desktop. Everything was going well until Verizon gave me a new DSL modem/router after which all print jobs are stuck in the print queue. Printing/scanning doctor told me "printer not connected to the homegroup. Nothing I've tried fixed. Downloaded the recent HP patch for network HP printers in Win7. Complete with a mistake any but installed at the next computer startup and scanning and printing has worked very well. Since then, the print jobs again get hit in the print queue and scanner does not work. Has made clear the queue, stop/start the spooler and the computer restarted. Still no printing or scanning. Print/ASNA doctor says everything is OK. Upgrades of the pilot research suggests that I already have the best driver. Printer is checked OK in the control/material Panel, is checked by default, port is OK etc etc. Before uninstall/reinstall the printer with no guarantee that will solve this problem, can someone tell me what could be wrong and how to fix it? Please help as this is really frustrating. Thanks in advance.

  Hi abuonag,

  We need clean completely the previous attempts of software to get a good setup for this printer.

  Follow the steps below and let me know what happens?

   

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-88604-2&cc=us&DLC=en&LC=en&OS=4063&product=3752459&sw_langis.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11. start the L4uninstall.exe

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Cannot remove the document from the queue

  I deleted a print job, but I can't get out of the queue. I can't print anything now. How can I get rid of this document so I can use my printer?

  To clear the print queue, stop the print spooler service and delete all the pending print files.
      
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
         
  To stop the Print Spooler Service, click Start, run and enter in the box:
          
  services.msc
          
  Click OK to open the Services Applet.
          
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
      
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
      
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service again...
      
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
      
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
      
  C:\WINDOWS\system32\spool\PRINTERS
          
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
          
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
      
  After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• Everything I print gets stuck in the queue, but the document is printed

  ORIGINAL TITLE: Spooler

  I installed a printer on a pc windows 7 64. Everything I print gets stuck in the queue, but the document is printed. The printer is on the network, I tried to restart the spooler and erased the record of the spooler, but perisisted of the question, given that the document gets stuck, no other agency will be able to print, remove the paper and print again to print but the file gets stuck again on the queue. I tried to change the IP address, but the same thing happened. Can someone help me?

  Hi, Omorguz,

  Printer brand and model, if you please.

  Start > run > type services.msc

  Press enter

  Scroll down to print spooler

  Select stop

  Let Windows stop the spooler

  Control Panel > printers and Faxes folder

  Right-click on the printer icon, then select open

  If you see pending orders in the queue, select the

  Click file > cancel all Documents

  If a job shows the deletion, but never finished, open the command prompt window

  Start > run > type cmd

  Press Ok

  Enter Net Stop Spooler

  Press enter

  Wait for the DOS window opens and is

  Open the command prompt window

  Type Net Start Spooler

  Press enter

  If that does not cancel the print job:

  Your directory of spools Windows XP is located at

  C:\WINDOWS\SYSTEM32\SPOOL\PRINTERS

  It will usually contain files like these:

  FP00008
  FP00008. SHD

  There are two files for each remaining print job.  Just delete these and restart the computer.  Your queue should now be provisioned.

  If you are printing over a network, and the queue is not clear after the above steps:

  Go to the computer that has the shared printer connected and perform steps 1 & 2 above.

  If this does not work, then go to the computer when he was sent to the printing of the task and perform the steps 1 & 2 on this computer.

  Run chkdsk

  Start > run > type CMD

  Press Ok

  Type C: chkdsk/r/f

  Press enter

  You will receive a message re: volume must be locked and you want to start scanning reboot?  Press y and press enter

  Type Exit to close the CMD window

  Restart the computer for the scan at startup

  This will check the integrity of your data on the hard drive of computer as well as find and fix errors that could corrupt your data or program files.

  I even recommend that you uninstall the printer and when you are done uninstalling, restart computer.

  When you reinstall the printer, reinstall it using the compatibility mode

  How to install a hardware device using the compatibility mode driver.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7

  It works on Windows 7 Professional, comprehensive and business - Windows XP Mode - it's free

  It's the best of both worlds: the new Windows XP Mode allows you to run Windows XP older right on your Windows 7 desktop business software.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  e FAQ or choose a link from the top of this page.

• Jobs FRUSTRATED stuck in the queue on Officejet 6500 with IP printing

  

  I'm especially frustrated because I just typed in many details, and when I click on "Preview" my text disappeared. Thank you, HP!

  Like others, I have an Officejet 6500 E709n. Print a test page, the diagnosis, the HP printer utility page, I cannot print any document. "They simply wander in the queue with the message host ' 192.168.2.6 network ' is busy. retrying in 10 seconds... forever. Yes, I tried to delete and add the printer again and he gets found very well.

  I can print with USB.

  I can print with Hello (but which is slow, so I turned off)

  It's okay if my OS X 10.5.8 laptop is connected wirelessly or through ethernet.

  The printer is connected to the router Wireless Ethernet. At the present time, my mac is connected to the same router by ethernet. I just started the HP printer utility and printed page setup very well, showing the ink levels.

  I'm guessing that it is a problem of intellectual property, and that the HP printer utility uses a different protocol to connect to the printer. Yes?

  Fine, I can print from Windows 7 computer that is connected by ethernet on the same network. IP addresses are correctly reserved.

  Please, someone help. I have a forthcoming major surgery and won't be able to walk upstairs to the office, so I really want to be able to print wireless from below. I bet once wired print jobs, the wirelss go, too.

  Well well, thanks to the kind soul who wrote this:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/duplex-printing-with-HP-OfficeJet-6500-wireless/m-p/129735#M3716

  (useful text cited below)

  You can also modify an existing printer driver:

  (1) system preferences > Print & Fax

  2) click your printer

  3) click on the Options button & supplies

  4) click on the driver tab at the top

  (5) in 'print using... '. "drop-down, choose Select printer software...

  (6) locate HP OfficeJet Pro L7700 in the list

  I followed the instructions to turn my printer OfficeJet OfficeJet Pro L7700 6500n driver. Let the JetDirect Protocol.

  Now I can print when connected to the Ether - and I can print duplex. AND I can print wireless.

  To sum up: If your print jobs stuck in the queue to print on a HP OfficeJet 6500n, but you can ping the printer or you connect via the HP printer utility, the following workaround solution:

  Change the IP to JetDirect Protocol

  Change the 6500n to OfficeJet Pro L7700 OfficeJet printer driver.

  SOLVED.

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• first export to the queue of media

  Help me understand?

  Chronology in which each clips have a cross dissolve to black when I export the sequence to the media in the queue, the result shows an export clip line color a right of the screen of the monitor still whenever that happens dissolve it black, but when the same sequence is exported directly from creation without going into the queue the clip of the exported sequence is fine without color line when I read in there again...

  Any suggestions?  Thank you

  If all the settings are the same, then the question is probably internal to the SOUL, which means that you will need a work around. First, check the updates to ensure you have the latest versions of first and SOUL. If the problem persists, here are a few alternatives to get the same effect:

  -Replace the effect melted with opacity keyframes ranging from 100% to 0% at the end of each clip, and 0% to 100% and at the beginning of the next clip. Or,

  -Create a title consisting of a large black rectangle. Place the title on the timeline over the end of each clip where you want to dissolve. Adjust the length according to the cases and the keyframe of the opacity of 0% to 100% at the end of the clip title and back down to 100% to 0% at the beginning of the element following, if you wish. This title can be copied and placed on each location where you want the effect of dissolution - to-black.

• Reliable messaging, attempts of the queue and management of AIA errors

  Hello
  I would like some advice on how to best use AIA errors management process in a process that uses the queues.
  We have a composite that picks up messages from a queue and executes a particular process on each message. If the errors of process, it preforms a rollback put the message on the queue. It retries then 3 times, possibly succeed in another attempt.
  My question is how this process should use error handling infrastructure. We want to see a single error Notification only in the final of new attempt fails. We do not want to be informed for each failure, that we will end up with a lot of unnecessary notifications.
  How it should be managed in AIA? Is there a flag located in the message when it's final attempt that the composite can check before sending the notification of the error? Or is used another method?
  Robert

  While I can't help you make these decisions, I want to make a final comment on this: it must also ensure not too much engineering workflows. What you describe with the queues, before and after the EBS would be wise in some complex scenarios (and that's why you'll find that the developer of the AIA Guide), but I doubt it's the right plan in each case of use asynchronous integration. This design has apparently more options, but also more code, several components middleware such as queues, so significantly more complexity leading to harder overall maintenance.

  The seeds of AIA use these interim queues as well - but only where the use case really required, for example where the orchestration of an order goes through the various stages of treatment. In this scenario, you do not want to be able to resubmit a message that failed each of these persistence points while guaranteeing delivery. For a one-way flow of integration that basically displays a message to application application B wouldn't us usually do.

  Gerhard

• Access to the queue and submit the form on their behalf:

  Hello

  We have a form that go on several approvals to complete the process. One of the process is hit with an approver (Manager).

  Somehow, he cannot access the workspace / or it is busy. He asked us (super admin) to approve tasks in its list of tasks on its behalf.

  How can I do? It will not connect to the workspace or do nothing with LC to grant permissions or something like that.  He asked us to approve.

  It is an urgent matter for me. Help, please.

  Thanks in advance,

  Krishna

  Access to the queues must be granted before the task arriving in the queue, so even if he shared his queue, now, the task cannot be visible.

  At this point, your only option would be to connect to the /AdminUI, like your LiveCycle (Super admin) administrator and locate the task through Admin management process and reassign the task to someone else.

  Hope that helps,

  Robert

• How to disable location under the privacy services? My switch is freezed help kindly

  How to disable location under the privacy services? My switch is freezed help kindly

  Try disabling "Find my iPhone" in iCloud settings first.

• I do a migration and need to know the location of the file of passwords for Firefox, please.

  I'm migrating from an older system to a new system.

  I need the location of the password file, please.

  I tried to migrate and crush the entire Firefox folder, but passwords are not transferred?

  I can't use sync to the cloud. It is a secure laptop and the cloud doesn't offer sufficient guarantees.

  TIA.

  MJR

  key3db and logins.json: these are the password files.

  Both are necessary.