locked 'photos' - cannot be changed, deleted or added

Similar Questions

• Why the Dreamweaver files locked and cannot be changed?

  I tried to open files in Dreamweaver and it tells me that the files are locked and cannot be changed. I don't know what to do to unlock the files.

  Don't know what that 'the wheel' and 'everyone' are, but when I changed those & read/write, which unlocked files.

• Thus children pass lock code cannot change it on iOS

  I have iOS devices where I can turn on the restrictions. Other people can use the device. I need to lock the access code, so it cannot be changed by "child".

  Device is iClouded and restrictions are enabled for a few things. Don't see anything about locking access code.

  I don't know exactly what you mean by "the lock access code", but you might want to take a look at this - to use a password with your iPhone, iPad or iPod touch - Apple Support

• "delete file" message box, font size too small and cannot be changed in ALL the usual ways

  message box "confirm deleting the file" (one you get when you try to delete, no matter what, the thr office), are too small and cannot be changed in ALL the usual ways

  I have tried all the usual ways, IE display properties, appearance menu advanced.

  It must be in a place of system resources, I can not find.

  any suggestions?

  message box "confirm deleting the file" (one you get when you try to delete, no matter what, the thr office), are too small and cannot be changed in ALL the usual ways

  I have tried all the usual ways, IE display properties, appearance menu advanced.

  It must be in a place of system resources, I can not find.

  any suggestions?

  have you seen these

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/small-window-pop-up/1d1ae5b6-fb1f-4135-a75c-d1b01f1b046d

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/when-i-play-games-on-Facebook-or-Pogo-the-pop-up/447d6349-3345-4102-9cd8-025485d9f992

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• I get the message photos cannot sync because they aren't ready

  Since the upgrade to El Capitan

  my photos sync properly, when I then sync my phone they come back even after I deleted and emptied the deleted file

  He always tells me that my photos cannot be synchronized my photos aren't ready yet

  you close the Photos.app when you do not use? Let your computer run all night and don't leave pictures, so he can t can prepare your photos for sharing with other applications.  Background processes need time to prepare the photo library.

• The referenced account is currently locked and cannot be logged on to. How to unlock it?

  This is the error I get when I enter the correct password also. I have Windows VISTA and I have a set a local policy for the account lockout threshold. My friend wanted to break my password without knowing it. It is not a domain account. Mine is an independent home PC. There is a single account that is my account. I tried in safe mode (even with the command line too), but even then I get the login screen & tell me to enter the password. If I enter the password, it says "the referenced account is currently locked and cannot be saved in. There is no fingerprint reader in mine either. So how I now access my account & see my Office I couldn't since 4 days now! Suggestions, please WELCOME!

  Next time consider that to have a friend who does not really know what there mess in this connection with your computer isn't a good thing. Nor is defining an account lockout policy without knowing what you do or creating an additional administrative account so hot either.

  The faster and easier to solve this problem is to enable (disabled by default) built-in Administrator account and set a null (blank) password. Allowing this account will put an icon for it on the logon screen so that you can then you connect, make an emergency administrator account (call it something like 'CompAdmin' or 'Tech' or other), change the passwords of other accounts, etc.. When you are finished, log on the built-in Administrator and in the "CompAdmin" account and disable the administrator built-in again if you want this additional security (recommended). Leave the account "CompAdmin" rise and future emergency situations given that the account for your daily work must be a Standard account. See the end of this post for general information on configuring user accounts in Vista.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Download CD (.iso) image and burn as an image, not as data. You will need a third party burning software. Then boot with the CD that you created and follow the directions.

  Once all of your changes, on the account of CompAdmin disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  General information of user accounts *.

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  ***

  Doing this requires a certain level of computer skills. You know better and if taking the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best course of action.
  MS - MVP - Elephant Boy computers - don't panic!

• The referenced account is currently locked and cannot be saved in

  Hello

  About three days ago, I am entered the wrong password into my computer and received the error message, "the referenced account is currently locked and cannot be saved to." I let the computer turned on for a long time see if this resets eventually, but I get the same error message. There are no other accounts on the computer and I do not currently have a password reset disk or the Windows 7 installation CD. I tried to access the system settings to turn off the need for a password to log on to the computer and change the date and time system, so the time lock should be reset, but it did not work.
  Any help would be appreciated, especially since if I had reset and reinstall, I would lose a lot of files and programs that I have purchased, which would be expensive to replace. Another friend of mine had a similar situation, but the blocking period was 30 minutes, so I'm not sure what the problem is here.
  Thanks for your help!

  Your running your PC mode at high risk:

  -No disc reset
  -Only one single admin account
  -No backup file
  -No installation media for your applications (and maybe no list of product keys)
  -No CD repair
  Each of these steps takes only a little effort to implement. Without all in place, you are likely to get hurt someday. You can probably fix your current problem as follows:
  -Ask a friend to burn a CD to repair for you.
  -Start the computer with this CD.
  -Use a system restore to set Windows in a week.
  -Revise the list above.

• Unable to print from other programs like Gimp and the error is "your photos cannot be printed because this error occurred.

  Original title: I can print from other programs such as Gimp, just not windows live photo

  When I first installed Windows Live I could print very well but now I have the same box that says "your photos cannot be printed because this error occurred.  I looked in the forums and found several answers, but none that have the situation corrected.

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not to print from the program Gimp and the error is 'your photos cannot be printed because this error occurred'. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Before troubleshooting, I have little information on the issue.

  1. what type of image file?

  2 are you facing this problem with specific program or all programs?

  3. did you of recent changes to the computer before this problem?

  4. What is the serial number and model of the printer?

  Note (1): If you are faced with the question with all programs, try the methods you haven't tried earlier and then check after each method:

  Method 1: Print a test page:

  http://Windows.Microsoft.com/en-CA/Windows7/print-a-test-page

  Method 2: Why can I not print?

  http://Windows.Microsoft.com/en-CA/Windows7/why-cant-I-print

  Note 2: If the problem is with the specific program (Gimp), I suggest you contact the manufacturer of the program.

  http://www.GIMP.org/webmasters.html

  Reference link:

  Picture printing: frequently asked questions: http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further!

  It will be useful.

• Title of movement cannot be changed

  Hello world

  I have problems trying to add a title of movement to my project.  When I drag and drop a title of movement in the titles and text group I get a popup message saying "cannot change this title of movement. "You could have split or applied Time Stretch. The title of the query is added to the timeline, but it cannot be changed. And Yes, I applied TimeStretch on one element in my project later in the timeline and on a separate track. The title of the motion that I am trying to add does not overlap in the timeline with the clip with TimeStretch applied to this subject.

  Is this behavior to predict something? Is this so that if somewhere in the draft, I used TimeStretch I can't use securities motion more?

  I'm on Mac OSX 10.11.6. My pre version is 14.1.

  Sorry, Marcin, I wasn't able to reproduce the problem on my iMac with OSX El Capitan. And you have certainly a lot more power than I do!

  I certainly don't see anything extraordinary in your project, based on your YouTube.

  What happens if you start a new project, with no media inside? Are you able to place and edit a title of movement there?

  In addition, the title you use a text font. And Macs can have problems with the fonts at times. (BTW, you have not all creative Cloud installed programs and you do not use cloud of fonts or font management, right?)

  Just as an experiment, try using the title of contemporary/general movement and see if that makes a difference.

• Acrobat Reader DC - cannot modify or delete pages

  Acrobat Reader DC.  Cannot modify or delete pages.

  Hi luciek42334613,

  Are you sure that you open the PDF file in Acrobat Standard DC not in Acrobat Reader ms?

  To change the PDF files, you need to open it in Acrobat Standard DC.

  Kind regards
  Nicos

• Please note that the quote/cart has already placed an order and cannot be changed.

  Hi all

  Currently, we are trying to create an order istore and doing so when you add an item to the cart, shopping cart throws the error "Please note that the quote/cart has already placed an order and cannot be changed. What happens with a single user. We created an order earlier and this was achieved convert quote to order. Now when we created a new this error pops up. Also, there is no record in the IBE_ACTIVE_QUOTES_ALL table for this user for any active carts.  Please provide suggestions. I cleared the cache bounced the server istore and disconnected and connected and always the question already exists.

  Thank you

  Hello

  Please confirm that there is no basket of assets

  Confirm the data in ibe_active_quotes_all

  SQL > select active_quote_id, order_header_id, quote_header_id

  of ibe_active_quotes_all

  where party_id = & partyid

  and cust_account_id = & cust_id;

  To get values-
  Select customer_id from fnd_user where user_name = ==> set to 1
  Select person_party_id in the fnd_user where user_name =
  Select object_id from hz_relationship where subject_id =
  Select cust_account_id in the hz_cust_accounts where party_id = ==> value 2

  Confirm the data are synchronized in citing it table aso_quote_headers_all:

  SQL > select order_id aso_quote_headers_all

  where quote_header_id = & from above;

  If a basket of assets is found, you can remove-
  delete from ibe_active_quotes_all where party_id = and = cust_account_id and record_type = "shopping CART";
  > This will remove the active cart of the user, so you can proceed to the next cart.
  Reference for the discussion:
  How to remove Active iStore basket of a user (Doc ID 1261926.1)
  Thank you
  Debbie

• iStore error: Please note that the quote/cart has already placed an order and cannot be changed.

  Hi all

  Please help with error - "Please note that the quote/cart has already placed an order and cannot be changed."

  I am able to search for items in the store but when add to cart we get error "Please take note that the cart/quote has already been placed an order and cannot be changed."

  We do not process returns in our iStore.

  Thank you

  Subin.

  Okay, okay...

  See if you have any folder for that user in the IBE_ACTIVE_QUOTES_ALL table, if so delete it and try again...

  IBE_ACTIVE_QUOTES_ALL is used to store the current active cart of a user.

  The user is identified by party_id cust_account_id reference HZ_PARTIES and the active carriage is identified by the quote_header_id referri

• When I delete photo main feed it deletes the photos that I put in separate files.

  Hi, I've uploaded my photos from PC to iPhone 5 s, all ok, now I want to put them in separate folders, what I did, but they always appear in my photo feed, so now I have 2 identical photos, but when I delete feeds main photo, it removes both, is there a way to keep only the pictures in Help file

  < re-titled by host >

  When you say in "separate files" do you mean in Albums on the iPhone?

  When you do this, if so, the images in Albums or projects are NOT double of what is in the main library. They are just "shortcuts" for the original images. That's why you can have the same pictures appear in multiple Albums without duplication and increase the size of the library.

  You must also make sure to keep the original high resolution on your computer.

• [Depressed] Due to the cannot update/change my card wireless dv8000t

  My HP pavilion dv8000t Intel 3945abg pci-e wireless card died a week ago and I want to upgrade to Intel5300agn because it supports Wireless-N much faster than G.

  However, I got a 104 error messeage: unsupported material and never boot into windows.

  I checked the internet and understood this limited HP than dv8000t support Intel3945 abg only bios.

  I don't know the reason behind this, however, whatever the reason, it is totally unacceptable.

  You cannot update/change the brand of the wifi card, it's the most ridiculous thing that I have experienced in my life of the computer.

  I'm a fan of HP and I always recommend my fds HP and they trust in me and buy HP laptops that I am the head of the spirit of my circle.

  Unfortunately, after this time, I can't buy any laptop of HP unless HP change their policy which is to give the user benefits from upgrading their equipment.

  HP must indicate the parts that customers of can/Can ' t make clear in their brochure. I wouldn't buy this dv8000t if I know that I can not update/change my wireless card.

  One more thing, it is that the total customer care serivces is crap.

  Sharon of the team don't even know not dv8000t is intel based from the model number. I must give a conference to tell him how HP named their laptops.

  dv8000 (T), T for intel cpu dv8000 (Z), Z is AMD processor-based. I really doubt on the quality of the knowledge of their own products customer service team.

  A frustrated customer.

  You can also use usb adaptors as well for the wireless, it doesn't have to be an internal card. But you can be upset by a manufacturer to support only the card with which he delivered. These aren't desktop computers.