Thus children pass lock code cannot change it on iOS

Similar Questions

• I can't turn on my firewall, error: Firewall Windows cannot change some of your settings Error code: 0 x 80070424

  My firewall is off, I went to control panel to turn it on and it comes up saying "Windows Firewall cannot change some of your settings Error code: 0 x 80070424" any ideas how to fix or what's goin'?

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Firewall problem: "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  My firewall doesn't let me turn it on. McAfee says that my computer is in danger because my firewall is not on and tried to turn back on. It gives me an error code and says ' firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  Because you pay McAfee protection antimalware we assume that asked for the help of McAfee Support? http://service.McAfee.com/

  Try this: http://support.microsoft.com/mats/windows_firewall_diagnostic/

• Firewall Windows cannot change some of your settings. Error code: 0x800704c

  I get this message when you try to turn on my firewall. "windows firewall cannot change some of your settings." "Error code: 0x800704c.

  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows: 
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian

• "Windows Firewall cannot change some of your settings. Error code 0 x 80070424 ' how to fix this?

  I get this error: "firewall Windows cannot change some of your settings. Error code 0 x 80070424"when I try to turn on the Windows Firewall (Windows 7).  I am also unable to start my computer in safe mode.  My computer has been infected by the virus 'Win 7 Security 2012', which is what caused this damage to my system.  The virus also seems to have removed all the system restore points before the infection!  I believe that I have the virus completely deleted.  I used Malwarebytes Anti-Malware, Spybot Search & Destroy, Ad-Aware, Kapersky Virus Removal Tool, antivirus Ati Avira (anti-virus program I was running when my computer has been infected by the virus) & Microsoft Security Essentials.  I ran the Scan SFC, a tool for emergency response Microsoft Support, Microsoft FixIt, ComboFix, & Tweaking.com Windows Repair all-in-One.  Repair Windows Tweaking.com seems to be turned Action Center back, where I now get a message that: "Windows Defender is turned off" & it does not seem to recognize MSE as my anti-virus program.  I need to know how to get Windows Firewall works again & get Action Center working properly again.  My computer has a partition with my Windows Recovery on it, but since I can't start in safe mode, I can not also start the restore partition to do a "repair" install, or even restore to factory settings!  Can anyone help?

  Also, when I use a search engine on internet, I get re-directed to a site that has absolutely NOTHING to do with the result of the research, and I click on... I am not that so that is proof that the virus is not COMPLETELY gone or not.

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  Windows Firewall - MpsSvc

  BFE - base filtering engine

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start the firewall now

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security service center - wscsvc

  Windows Defender -windefend

  BITS - BITS

  Updated Windows - wuauserv

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• How to fix error "firewall Windows cannot change some of your settings. 0x800745b error code.

  I have microsoft essential security installed on my laptop & I also downloaded & installed a trial version of avast antivirus.

  & I don't know what other changes on my laptop has been filed, that caused this error, when I'm clicking to turn on Windows Firewall, it invites you to use recommended settings & by clicking "Use recommended settings" it gives an error "firewall Windows cannot change your settings. Code error-0x800745b ".
  How to solve it?

  Follow the steps in the link and check if that helps.

  I suggest you follow the steps in the link below (with an emphasis on the method 3 and 4)

  http://support.Microsoft.com/kb/2530126>

  `~`

  The current time and the date now in Baja California, Mexico

  22:28
  Thursday, May 16, 2013
  DST - 0700 UTC
   
  UTC/GMT is 05:28 Friday, May 17, 2013
              
  Current weather conditions in San Felipe

  Sunny90 ° F / 32 ° C

• Windows Firewall cannot change some of your settings/error code ox80070424

  I get this message "windows firewall cannot change some of your settings/error code ox80070424.

  In a little more detail can help, like when is the message that appears and what OS you have (W7 starter Edition-home premium 32 bit 64 bit etc.). When the message started to appear? either you have installed a program or had a malware attack? (If you have or suspect that you may have been attacked by malicious software, then download, install, update and run a scan with Malwarebytesfree)

  This can be interesting to read - http://support.microsoft.com/kb/968002 not quite the same message, but the same error code, i.e. at least the fixit FW.

• When trying to activate Windows Firewall manually, get code error 80070422 0 x ' windows firewall cannot change some of your settings.

  I use windows 7.

  my windows firewall was disabled. When I click on turn on the firewall, that a message "Action Center can't turn on the firewall".when I try to turn on manually I get an error report that says error code 80070422 0 x ' windows firewall cannot change some of your settings.

  can someone please help?

  PS.i recently had a virus.

  See the thread below for a possible answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-start-Windows-Firewall-for-Vista/8d3ab846-d5a9-4DF1-bb1e-a6f4842abc63

• Firewall Windows cannot change some of your settings. Error code 0 x 80070424

  I use 8 (64-bit) windows, try to turn on "Windows Firewall".

  Get this error "firewall Windows cannot change some of your settings. Error code 0 x 80070424.

  I tried to locate the "Windows Firewall" services in the service (in Services.msc) database, but this service is not listed. Help, please

  Thanks Robear,

  Today, I just made "Reset PC" to make it back to my factory setting (even if I lost all my data, but I've got to the top of it). Then, I used "Norton Removal Tool" to remove Norton who was there in orginal factory setting.

  Now, I tried to run "Windows Defender" & "Windows Firewall" both are running without any problem.

  Thank you much for the help.

  Vikas

• Why the Dreamweaver files locked and cannot be changed?

  I tried to open files in Dreamweaver and it tells me that the files are locked and cannot be changed. I don't know what to do to unlock the files.

  Don't know what that 'the wheel' and 'everyone' are, but when I changed those & read/write, which unlocked files.

• cannot change the images downloaded from the iphone 4S

  Photos uploaded from iPhone4s on PC Windows 7 cannot be renamed, copied, changed or anything else. I get a message "error code: (0 x 80070057) '"

  Photos uploaded from iPhone4s on PC Windows 7 cannot be renamed, copied, changed or anything else. I get a message "error code: (0 x 80070057) '"

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• HP ENVY Phoenix 860-000nd: cannot change bios Phoenix language - utility Configuration BIOS HP - HP ENVY 860-000nd

  Hello

  trying to change the language of the BIOS, the Bios HP Configuration utility, but get the error code 6 - access denied (failed due to permissions of the BIOS).

  BIOS version is vA0.08 THI.

  I can read (get) successfully, but cannot change any settings... tried to change other settings to no avail.

  What Miss me? Should I first set a password?

  Hi there @mucckki,

  Welcome to the Forums of HP Support!  I understand that you want to change the BIOS language on your system in current Dutch English.  I'm happy to help you with this.

  Was the Dutch language that the BIOS was set to out of the box or he later changed in Dutch?

  If original default systems was English, you can try to look at the motherboard of your system guide. HP and Compaq Desktop PCs - specifications of the motherboard, Thimphu. At the bottom of the page is an indicator for the riders for the BIOS and CMOS password. If your default language was English, you can use the jumper to clear the current CMOS settings, including language.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• The referenced account is currently locked and cannot be logged on to. How to unlock it?

  This is the error I get when I enter the correct password also. I have Windows VISTA and I have a set a local policy for the account lockout threshold. My friend wanted to break my password without knowing it. It is not a domain account. Mine is an independent home PC. There is a single account that is my account. I tried in safe mode (even with the command line too), but even then I get the login screen & tell me to enter the password. If I enter the password, it says "the referenced account is currently locked and cannot be saved in. There is no fingerprint reader in mine either. So how I now access my account & see my Office I couldn't since 4 days now! Suggestions, please WELCOME!

  Next time consider that to have a friend who does not really know what there mess in this connection with your computer isn't a good thing. Nor is defining an account lockout policy without knowing what you do or creating an additional administrative account so hot either.

  The faster and easier to solve this problem is to enable (disabled by default) built-in Administrator account and set a null (blank) password. Allowing this account will put an icon for it on the logon screen so that you can then you connect, make an emergency administrator account (call it something like 'CompAdmin' or 'Tech' or other), change the passwords of other accounts, etc.. When you are finished, log on the built-in Administrator and in the "CompAdmin" account and disable the administrator built-in again if you want this additional security (recommended). Leave the account "CompAdmin" rise and future emergency situations given that the account for your daily work must be a Standard account. See the end of this post for general information on configuring user accounts in Vista.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Download CD (.iso) image and burn as an image, not as data. You will need a third party burning software. Then boot with the CD that you created and follow the directions.

  Once all of your changes, on the account of CompAdmin disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  General information of user accounts *.

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  ***

  Doing this requires a certain level of computer skills. You know better and if taking the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best course of action.
  MS - MVP - Elephant Boy computers - don't panic!

• The referenced account is currently locked and cannot be saved in

  Hello

  About three days ago, I am entered the wrong password into my computer and received the error message, "the referenced account is currently locked and cannot be saved to." I let the computer turned on for a long time see if this resets eventually, but I get the same error message. There are no other accounts on the computer and I do not currently have a password reset disk or the Windows 7 installation CD. I tried to access the system settings to turn off the need for a password to log on to the computer and change the date and time system, so the time lock should be reset, but it did not work.
  Any help would be appreciated, especially since if I had reset and reinstall, I would lose a lot of files and programs that I have purchased, which would be expensive to replace. Another friend of mine had a similar situation, but the blocking period was 30 minutes, so I'm not sure what the problem is here.
  Thanks for your help!

  Your running your PC mode at high risk:

  -No disc reset
  -Only one single admin account
  -No backup file
  -No installation media for your applications (and maybe no list of product keys)
  -No CD repair
  Each of these steps takes only a little effort to implement. Without all in place, you are likely to get hurt someday. You can probably fix your current problem as follows:
  -Ask a friend to burn a CD to repair for you.
  -Start the computer with this CD.
  -Use a system restore to set Windows in a week.
  -Revise the list above.