Logging errors to a sso migrated high on OAM 11.1.1.5.0 10g bp2

Similar Questions

• shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

  shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.

• Setup log error

  Whenever I try to download a new program I am getting and installation.log error.  Programs with no download... Help, please!

  Hello

  1. did you last changes before the show?

  2. what browser do you use?

  3. What is the full error message?

  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Otherwise, provide us with more information so that we can better help you.

  It will be useful.

• I get the thesis of my observant event log errors.

  I get the thesis of my observant event log errors. Please help me find a solution for the errors I have thanks. On the correction of errors please send me web links to solve problems.

  1. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  2. your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x0800270004C2 address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  3 session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  4. dynamic link libraries custom are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  5 resolution of names for the name officecdn.microsoft.com expired after none of the servers configured DNS responded.

  6 WLAN AutoConfig service has stopped successfully.

  7. The ICS_IPV6 failed to allocate _ bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  Log name: Microsoft-Windows-Dhcp-Client/Admin
  Source: Microsoft-Windows-Dhcp-Client
  Date: 19/02/2015 04:27:17
  Event ID: 1001
  Level: error
  Description:
  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00D041BE61DB address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  You can remove the error by following the advice of 4468mt in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/EventID-1001-DHCP-your-computer-was-not-assigned/2b5227e0-8171-E011-8dfc-68b599b31bf5

  Log name: Microsoft-Windows-Kernel-EventTracing/Admin
  Source: Microsoft-Windows-Kernel-EventTracing
  Date: 19/02/2015 04:25:11
  Event ID: 3
  Level: error
  Description:
  Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  See the following link for a solution:
  https://social.technet.Microsoft.com/forums/Windows/en-us/0c942bd9-47ad-4897-a5c2-485cc9fe681f/Microsoft-Security-client-OOBE-stopped-due-to-the-following-error-0xc000000d?Forum=w7itprosecurity

  Log name: System
  Source: Microsoft-Windows-Wininit
  Date: 27/02/2015 03:34:33
  Event ID: 11
  Level: WARNING
  Description:
  Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

  This report of warning is ignored. Only occasionally do you see event ID: 11 reports that reveal an unwanted guest when the computer is started.

  Log name: System
  Source: Microsoft-Windows-DNS-Client
  Date: 24/02/2015 22:51:01
  Event ID: 1014
  Level: WARNING
  Description:
  Name resolution for the name of officecdn.microsoft.com has expired after none of the servers configured DNS responded.

  This report of warning is ignored. The frequency with which this report occurs varies from one computer to the other depending on the quality of the internet connection. They are usually indicative of a temporary problem and if not all computers are located in the most, Event Viewer system log.

  Log name: System
  Source: Microsoft-Windows - autoconfiguration WLAN Service
  Date: 18/02/2015 23:39:07
  Event ID: 4001
  Level: WARNING
  Description:
  Autoconfiguration WLAN Service has stopped successfully.

  This report of warning is ignored. These reports are generated every time that the computer starts shutdown.

  Log name: System
  Source: Microsoft-Windows-SharedAccess_NAT
  Date: 19/02/2015 04:25:19
  Event ID: 34005
  Level: WARNING
  Description:
  The ICS_IPV6 failed to allocate

  bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system.

  This report of warning is ignored.
  https://support.Microsoft.com/kb/2550111?WA=wsignin1.0

  You have no reports of significant error in your event viewer system log.

• T500 w Vista hangs light w HDD and event log error iastor with ID 9 (Device\Ide\iaStor0)

  Summary

  Edited: This problem was finally resolved by Intel Matrix Storage Manager driver 8.6.3 sent by Lenovo, January 13, 2009

  It is an intermittent problem on 500/T400 with XP or Vista 32.

  Vista 32: the HARD drive light stays on for several minutes, sometimes never goes. The machine crashes immediately, or it may continue to work for a while sometimes sluggish performance w. In all cases the operating system stops not completely so that the HARD drive light is forcing a hard stop with the keyboard, button on / off.

  XP: random BSOD of iastor.sys.

  In the log window of the events is an event of error each time passed than the HDD light grip. Source is iastor, Id is 9, and the text is "the device, \Device\Ide\iaStor0, did not in the expiration time. See below for a description of how show all events iastor error 9 in your event log.

  The problem has appeared since the second or third week of December. The likely source is an update of the Intel Matrix Storage Manager, driver version 8.6.0 delivered on 4 December.

  This driver has been after December 4, distributed via Thinkvantage System Update. T400/500 made in December were also shipped with this driver installed. Since then, lenovo has withdrawn the driver, drivers, T400 and page software here and the T500 here page now shows the driver for Vista 32 and XP as version 8.2.4.

  The experience is that this problem is solved in the restaurant or by installing the 8.2.4 version of the Intel Matrix Storage Manager driver. If the 8.6.0 driver was installed through system update, go to Device Manager and open the Intel(r) ICH9M-E/M SATA AHCI Controller. On the driver tab, make sure that 8.6.0 is installed, and then click the roll back button.

  If the T400/500 has been shipped with the 8.6.0 driver installed, first driver to download the 8.2.4 and run the extract in the c:\drivers folder. Update driver then choose Device Manager. On the second screen appearing to ensure you choose "Let Me pick from a list of drivers on the computer' - in the case otherwise, he will tell you, best driver is already installed when you click Next. In the next screen, select Intel(r) ICH9M-E/M SATA AHCI Controller and click on "disk" and on the next screen, specify the path c:\drivers\win\imsm.

  PS review iastor in case connection error messages comparing them to the update system install history as follows:

  1. in Control Panel, in administrative tools, open the Windows event log. If this is not the first time, you use the newspaper, you may need to select the local newspaper - the top left - line for the Summary window to open in the Middle, you can maximize this window down.

  2. Select the error line in the Middle window and click Show all instances of this event on the right side. All error events are now listed in the Middle window.

  3. click on filter the current view on the right side. In the new menu, enter 9 in the field of event ID, select ok and then Yes.

  4. you should now have a list of all occurrences of the error in iastor event. Scroll through the list and note the timestamp of the first occurrence of the error.

  5. open Thinkvantage System Update, then select historical spectacle of installation. Scroll the window to the right you see the timestamps. Examine your updates, just before the message in iastor appeared first in your event log.

  __________________________________________________________

  Original entry

  My new T500 a few days after the execution of the first update of the system began to hang once or twice every 24 hours with light on HARD drive and "the device, \Device\Ide\iaStor0, did not in the expiration time" in the registry.

  ,

  iastor is the Intel Matrix Storage Manager (MSM) for their device RAID/AHCI controllers. The Intel AHCI controller listed in as installed for the T500 shows version 8.6.0 Device Manager, which is the current version according to the Intel web site.

  There are zero warnings to disk in the event log errors, I ran the drive diagnostic - the drive is healthy. I don't think that this is a problem of DVD or disc, it's the MSM which is a failure.

  Googling on the MSM error message there is a certain. A batch is since last year and concerns of Intel THAT MSM supporting properly - l/min, this has been fixed in MSM 7.5.0 see http://www.intel.com/support/chipsets/imsm/sb/CS-025783.htm

  A second batch was held earlier this year for Dell laptops that, without looking into the details, seems to have been caused by an incompatibility between the BIOS and the MSM reported. (Update system to update my BIOS to 1.20 - 1, 01).

  Other solutions to this problem found on the web include the removal of iastor/MSM settings in the Windows registry to disable l/min and turn off AHCI in the BIOS.

  It would be nice to be able to verify that this isn't a hard drive problem by disabling the AHCI and therefore the Intel controller. How to do that in T500 BIOS Setup and what are the implications on the performance of my drive (Hitachi 160 GB at 7200 RPM)?

  
  

• Metric derived in FMS log errors

  Hey guys,.

  A month or two there are yall really helped me when I tried to create a metric derived for number of CPU.  That's what we were using.

  scope is an instance of HostCPUs
  cpuCounts = #! CPUCounts: UC = $scope # .topologyObjects
  cpuCount = cpuCounts.iterator () .next)
  logic = cpuCount.logicalCPUs
  Physics = cpuCount.physicalCPUs
  virtualCPUs = cpuCount.virtualCPUs as Double
  use = (#utilization #)? div (100)
  inUse = (virtualCPUs * use)? Round (2)

  It still works very well for what I wanted, but I see several errors in the FMS logs about this derived metric.  I think I need to scope it better so that these errors do not appear in the newspaper, but I'm not sure what it takes to reach.  Any help would be greatly appreciated! It is currently limited to HostCPUs

  Here is an example of the errors that I see in the log file, I guess that's because a value is zero, but Im not sure how to modify the code to check that.

  2013-04-23 05:48:00.889 WARN [data-3-wire-12472] com.quest.nitro.service.derivation.DerivationService - impossible to evaluate the following calculation: DerivationCalculation for "CPUUsageCount" on "HostCPUs" calculated by (/ / scope is an instance of HostCPUs)
  cpuCounts = #! CPUCounts: UC = $scope # .topologyObjects
  cpuCount = cpuCounts.iterator () .next)
  logic = cpuCount.logicalCPUs
  Physics = cpuCount.physicalCPUs
  virtualCPUs = cpuCount.virtualCPUs as Double
  use = (#utilization #)? div (100)
  inUse = (virtualCPUs * use)? Round (2)

  ) DATA_DRIVEN
  com.quest.nitro.service.sl.interfaces.scripting.ScriptingException: com.quest.nitro.service.sl.interfaces.scripting.ScriptAbortException: java.lang.NullPointerException
  -beginning of script-
  scope is an instance of HostCPUs
  cpuCounts = #! CPUCounts: UC = $scope # .topologyObjects
  cpuCount = cpuCounts.iterator () .next)
  logic = cpuCount.logicalCPUs
  Physics = cpuCount.physicalCPUs
  virtualCPUs = cpuCount.virtualCPUs as Double
  use = (#utilization #)? div (100)
  inUse = (virtualCPUs * use)? Round (2)

  --end of script--

  at com.quest.nitro.service.scripting.ScriptingService.invoke(ScriptingService.java:618)
  at com.quest.nitro.service.rule.expression.Expression.evaluate(Expression.java:125)
  at com.quest.nitro.service.rule.expression.Expression.evaluate(Expression.java:138)
  at com.quest.nitro.service.derivation.DerivationCalculation.evaluateExpression(DerivationCalculation.java:764)
  at com.quest.nitro.service.derivation.DerivationRulette.trigger(DerivationRulette.java:318)
  at com.quest.nitro.service.derivation.DataDrivenDerivationRulette.arm(DataDrivenDerivationRulette.java:51)
  at com.quest.nitro.service.derivation.DerivationService.process(DerivationService.java:817)
  to com.quest.nitro.service.data.DataService$ PublishMetricsTask.callProtected (DataService.java:1106)
  to com.quest.nitro.service.data.DataService$ PublishMetricsTask.publish (DataService.java:1072)
  to com.quest.nitro.service.data.DataService$ PublishMetricsTask.run (DataService.java:1007)
  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)
  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)
  at java.util.concurrent.FutureTask.run(FutureTask.java:138)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
  at java.lang.Thread.run(Thread.java:662)
  Caused by: com.quest.nitro.service.sl.interfaces.scripting.ScriptAbortException: java.lang.NullPointerException
  -beginning of script-
  scope is an instance of HostCPUs
  cpuCounts = #! CPUCounts: UC = $scope # .topologyObjects
  cpuCount = cpuCounts.iterator () .next)
  logic = cpuCount.logicalCPUs
  Physics = cpuCount.physicalCPUs
  virtualCPUs = cpuCount.virtualCPUs as Double
  use = (#utilization #)? div (100)
  inUse = (virtualCPUs * use)? Round (2)

  --end of script--

  at com.quest.nitro.service.scripting.Script.runInternal(Script.java:334)
  at com.quest.nitro.service.scripting.Script.run(Script.java:255)
  at com.quest.nitro.service.scripting.ScriptingService.invoke(ScriptingService.java:604)
  ... 15 more
  Caused by: java.lang.NullPointerException
  to org.codehaus.groovy.runtime.dgmimpl.NumberNumberMultiply$ DoubleDouble.call (NumberNumberMultiply.java:113)
  at Derivation_CPUUsageCount_on_HostCPUs_script_ae647b916b0dba65d3009a4c6965d9c0.run (Derivation_CPUUsageCount_on_HostCPUs_script_ae647b916b0dba65d3009a4c6965d9c0.groovy:8)
  at com.quest.nitro.service.scripting.groovy.GroovyScript.exec(GroovyScript.java:141)
  at com.quest.nitro.service.scripting.Script.runInternal(Script.java:310)

  derivedMetricName = 'vCpuInUse @ HostCPUs.

  Org.apache.commons.logging.Log log = org.apache.commons.logging.LogFactory.getLog ("derivedMetric. ("${derivedMetricName} {scope?. monitoredHost?. name}");

  try {}

  try {cpuCounts = #!} CPUCounts where UC = $scope #?. getTopologyObjects()} catch (e) {log.error ("cpuCounts: ${f.toString ()}"); return null}

  cpuCount = cpuCounts?. getAt (0) / / cpuCounts.iterator () .next)

  try {virtualCPUs = cpuCount?. virtualCPUs as Double?: 0.0 d} catch (e) {log.error ("virtualCPUs: ${f.toString ()}"); return null}

  try {use = (#utilization #)?. div (100)?: 0.0 d} catch (e) {log.error ("use: ${f.toString ()}"); return null}

  inUse = (virtualCPUs * use)? Round (2)

  return inUse

  } catch (e) {}

  log. Error ("${try ()}")

  }

  Returns a null value

  This will help you to understand where the errors are produced.

• Checking the logs, error, transactional logs logs

  Hello-

  I was wondering if Eloqua has Audit logs, logs errors or transactional to show newspapers if information is captured by Eloqua, or if an error occurs somewhere behind the scenes.

  Going through the manual, I am only to find references in the log files as part of the add-on of HIPAA.

  Are there logs without the Add on HIPAA and they easily accessible?

  Thank you

  Doug

  Hi Doug -.

  There are a few different types of newspapers, that you can find in Eloqua:

  To access each, you will need the correct credentials (usually the customer administrator) and will find them inside the Configuration tab:

  

  1. connection of the user history.

  This is located under the users

  

  And the tab inside users dashboards

  

  The dashboard looks like this, you can access the raw data in the button of "additional reports:

  

  This is a very old style scoreboard E9 and cannot be found inside the preview.

  2. errors and history of CRM integration

  It is located in the database of the administrative menu section, and more particularly in the integration:

  

  Your integration to different RCMS that SFDC and can display different names as the picture below, but the statement is located at a few places here:

  

  If you point to each of the following areas (waiting for update, update complete, updated failed, with success of the imported records) you will get the menus that look like the image below and you can click on them to view a specific report on integration:

  

  There is also a button seen above you can click to review additional reports:

  

  Similar to the dashboard above, these are not available in Insight.

  3. download history

  Within the area of integration (as shown above) you can access the data on downloads and file transfers, click "Incoming" - it will open something that looks like the image below and in the reports tab, you can find additional reports on data in the system.

  

  4 marketing Operations Center

  The other place, you can find more information is the center of Marketing operations, it can be found after the path in the image below:

  

  It is more operational data, but may be some of you looking for example how it looks:

  

  Hope this helps,

  Lauren

• How to create an incident rule to control of the 12 c Cloud Control alerts log errors

  I have a feeling it will be blinding in retrospect. I have 12 c Cloud control effective against a dozen guests and many DBs I have a rule defined for a database Instance that contains many points of interest - such as FRA filling. I chose each alert metric to see with the alerts log, including 'Generic Alert Log Error'. But I get error messages that appear in the alert log, as ORA-10173.

  Also, is there somewhere in the doco, or a data dictionary view, I can list all the parameters available?

  Thanks, helped these docs. It seems that Oracle has replaced generic monitoring with specific elements of monitoring, but it lacks some interested. However, the doc shows how this can be turned on again. Shame that it's hidden.

• I get an error message after you migrate my Adobe apps for my new MacBook Pro.  It reads "Adobe Creative Cloud is necessary to solve this problem.  However, it is missing or damaged. "I tried to download and reinstall a new copy but error

  I get an error message after you migrate my Adobe apps for my new MacBook Pro.  It reads "Adobe Creative Cloud is necessary to solve this problem.  However, it is missing or damaged. "I tried to download and reinstall a new copy, but the error message still appears.  Help, please.

  do not migrate the adobe programs.

  All uninstall adobe that you migrated.

  clean by, http://www.adobe.com/support/contact/cscleanertool.html

  and then properly install your adobe programs using the cc from here, download Adobe Creative Cloud apps desktop application | CC free trial Adobe

• ORA-19504: failed to create the file, ORA-00270: creation of the archiving log error

  Hello
  
  Oracle 11 g 2 on windows 7, I of primary and standby on the same system (learning).
  
  When I check on status of primary and secondary use under request it gives applied log is 'NO '.
  
  SQL > select sequence #, used from v$ archived_log;
  
  SEQUENCE # APPLIED
  ---------- ---------
  516 NO.
  517 NO.
  NO. 523
  NO. 524
  525 NO.
  531 NO.
  NO. 532
  533 NO.
  NO. 541
  544 NO.
  
  When I checked error on DB primary .he give me more erro.
  SQL > SELECT 'ID', 'DB_status' STATUS DEST_ID, EXCURSION place "Archive_dest', 'ERROR' OF V$ ARCHIVE_DEST WHERE DEST_ID < = 5;
  ---------- ---------
  Error Archive_dest
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  1 D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG ORA-19504: cannot create the file «»
  
  2 STAND ORA-00270: creation of the archiving log error
  
  I checked the space on the system... is there enough free space on the disk.
  
  On primary DB (destination of the journal archive)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  On standby DB (list of newspapers of record)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  Please guide it's because of the destination of the journal archive even shared by the standby and primary?
  
  If yes how do I change the destination of the newspaper archive on standby DB?
  
  Thank you.
  
  Edited by: 977220 April 18, 2013 20:49

  change initialization parameter

• ORA-06502: PL/SQL: digital error or value: number too high accuracy

  Hi all
  Sorry I can't speak English very well
  ========
  IM creating a function in the hr schema
  I need to calculate a tax
  syntax of the function is
  
  CREATE OR REPLACE THE TAX FUNCTION
  (F_TAX EMPLOYEES % OF SALARY TYPE)
  RETURN NUMBER IS
  V_SAL EMPLOYEES. % SALARY TYPE.
  
  BEGIN
  SELECT salary * 12
  IN v_sal
  Employees
  WHERE EMPLOYEE_ID = F_TAX;
  IF V_SAL > = 40000 THEN
  V_SAL: = V_SAL / 0,20;
  ELSIF V_SAL > = 30000 THEN
  V_SAL: = V_SAL / 0.15;
  END IF;
  RETURN V_SAL;
  TAX END;
  ==================
  When I select a tax I have this problem
  SELECT (EMPLOYEE_ID) TAX
  EMPLOYEES
  
  It comes
  SELECT (EMPLOYEE_ID) TAX
  *
  ERROR on line 1:
  ORA-06502: PL/SQL: digital error or value: number too high accuracy
  ORA-06512: at "HR. The TAX", line 16

  V_SAL is declared as HR. EMPLOYEES. % OF SALARY TYPE. If you look at the definition of time. The table EMPLOYEES, the SALARY column is a NUMBER (8,2). This means that it can handle numbers up to $999,999.99 (8 total digits with 2 decimal places).

  Your IF statement is dividing the salary by 0.20, which is equivalent to multiplying by 5 or dividing by 0.15, which is multiplied by 6.67. In reality, at least a salary is high enough now that when you multiply by 5 or 6.67 it exceeds the limit of $999,999.99 (especially when you already multiplied by 12 SALARY column in your SELECT statement).

  -If your intention is to return in numbers that exceed the limits of the SALARY column in human resources. EMPLOYEES, you will need to declare V_SAL differently. You can declare V_SAL as a NUMBER (11.2), for example, given that any number that you store in a NUMBER (8.2), multiplied by 60, which can be represented in a NUMBER (11.2).
  -If your intention is to return the numbers that fall within the limits of the SALARY column in human resources. USED, I suspect that the algorithm that you implemented is incorrect. Perhaps, for example, you would divide by 1.2 or 1.15 as a kind of tax accounting?

  Justin

• Error when installing SSO 5.5 on the new Machine

  I tried to install VMware vCenter Single Sign-On VMware-VIMSetup-all 5.5.0 - 5.5.0 - 1312299.iso, and like others, I have a problem. I want to install on a VM Windows Server Datacenter 2008 R2 SP1 64 bit new.

  The first time I ran the installer, I display Single Sign-On prerequisite vCenter and realized that my network on the new machine settings were a bit off. So I canceled the installation program, fixed my network, started the Setup program again and this time I got the message "DNS resolution is effective."

  Then I continued my way. I select "vCenter Single Sign-On for your first server vCenter Server", it starts to install, the State can "configure SSO components... "and then it shows" restoration of action: ", then"vCenter Single Sign-On the Setup Wizard ended prematurely because of an error. "All attempts to install later resulted in the same thing.

  I've seen some solutions proposed elsewhere, and I've tried:

  • Rename C:\ProgramData\VMware\CIS to CIS.old
  • Run (VMware-VIMSetup-all-5.5.0-1312299.iso)\Single Sign-On\prerequisites\VMware-python.msi (tried right click menu: repair and also uninstall then install))
  • In 'HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc. \VMware Infrastructure', there is no SSOServer

  I have attached vim-sso-msi and vminst.log of %TEMP%. I also found a vminst.log of a directory longer % TEMP %; I joined who as vminst - Temp.log too, in the case where it is useful.

  Looking at newspapers, in vim-sso-MSI is towards the end:

  MSI (c) (28:DC) [14:08:39:385]: Note: 1: 1708

  MSI (c) (28:DC) [14:08:39:385]: product: vCenter Single Sign-On - Installation failed.

  MSI (c) (28:DC) [14:08:39:385]: Windows Installer installed the product. Product name: vCenter Single Sign-On. Product version: 5.5.0.297. Product language: 1033. Manufacturer: VMware, Inc. installation success or error status: 1603.

  It's the mid:

  MSI (s) (38:A0) [14:07:41:006]: op of execution: ActionStart (Name = BootstrapAll),

  Action 14:07:41: BootstrapAll.

  MSI (s) (38:A0) [14:07:41:022]: op of execution: CustomActionSchedule(Action=BootstrapAll,ActionType=11265,Source=BinaryData,Target=***,CustomActionData=***)

  MSI (s) (38:88) [14:07:41:037]: call for a custom action to distance. DLL: C:\Windows\Installer\MSI2A01.tmp, point of entry: VmSetupExecuteBootstrap

  MSI (s) (C 38: 5) [14:07:41:037]: generation random cookie.

  MSI (s) (C 38: 5) [14:07:41:053]: created server custom with PID 1724 (0x6BC) Action.

  MSI (s) (38:FC) [14:07:41:178]: running as a service.

  MSI (s) (38:FC) [14:07:41:193]: Hello, I am your server custom action high 64-bit.

  Action 14:07:41: PostInstallScripts. Configuration of SSO components...

  PostInstallScripts: PostInstallScripts

  PostInstallScripts: PostInstallScripts

  CustomAction BootstrapAll returned error code 1603 (note this is perhaps not 100% accurate if translation happened inside the bin to sand)

  Action ended 14:08: InstallFinalize. Return value 3.

  Vminst - Temp.log, I see this, but I don't know if it's relevant:

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 LDAP-Utils: VmSetupMakeLdapsConnection

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 ldap_sslinit attempt...

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 ldap_connect attempt...

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 ldap_bind_s attempt...

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 impossible to establish the LDAPS connection. Error: 1326

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 VmSetupUpdateVmdirCert error: 1603

  VMware Single Sign-on-build-1302472: 25/09/13 14:08 VmSetupVmdirCert error: 1603

  Folder is C:\Users\Administrator.MCI\AppData\Local\Temp\2

  I got vminst - C:\Users\Administrator.MCI\AppData\Local\Temp Temp.log

  Does anyone have any ideas on what I can try, or any other information that might help?

  So I think that I just found out the real reason, it was a failure. In the above-mentioned documentation, they say that; "" "^-are not valid characters in a password. But they missed a character: space. I was using a space character in my password.

  I tried on the setup of a bunch of times. When one of the invalid characters above is used, Setup will continue anyway. And then launching a 1326 in this another log file that I mentioned. Using a space does the same thing. And it's not as if they are not checking the password at all. If you do not meet the complexity requirements in their documentation, then you get this notice:

  

  I don't know why they accept invalid characters in the installation program. And I don't know why they missed listing the space character as a character not valid in their documentation. It is an ASCII character, after all (0x20).

  I tried a few other passwords a long time ago, but I think that was before found this documentation, so I used one of the other characters that are not valid. Or maybe I used another invalid character who is undocumented. If the space is not documented as an invalid character, so who knows how many other invalid characters are?

  And so I say to all those who believe that they have the same problem I did:

  First of all, make sure that it is the same problem. Check that you have found an error code 1326 in the other file vminst.log, located in a directory above %TEMP%. If you can't find a 1326, then you probably have a different problem.

  Then, try other passwords. Do not use the documented invalid characters. And keep in mind that there may be other invalid characters without papers.

  The password doesn't have to be the same as the password for the local Windows administrator account. Just, it cannot contain invalid characters without papers.

• TDMS logging - error-201309

  Material-

  1. NEITHER SMU 1062 q
  2. NEITHER SMU-8130
  3. 2 x NI-SMU-6358
  4. Windows 7, LabVIEW, 2013 in the development environment

  Software

  Code, but it is essential, I have 3 DAQmx tasks. 2 analog and digital 1. Each are configured to record (only) to 3 separate TDMS files (could not understand how the flow in a single file). All is well until I try a long run and then try to stop the digital task. I get the error below.

  Adding a giant wait (10 s) solves this problem. My guess is that writing streams isn't over when I try to close the task and he's trying to close the file. In all these cases, DAQmx argues that it is finished with the task.

  Error-201309 occurred at DAQmx stop Task.vi:3590004

  Possible reasons:

  Cannot write to the disk. Make sure the file is accessible. If the problem persists, try recording in a different file.

  Property: Logging.FilePath
  Required value: D:\temp_20160225_135243_digital.tdms

  Task name: Slot3 Digital

  So I'm a bit puzzled as to why that happens and can't seem to find a way to find out if everything is tied up the disc is completed.

  Thanks in advance.

  Yes, in the interest of not to be that guy (what you see!), I'll post what we discovered.

  It turns out that the bottleneck that we had was in the SATA connection. The SSD has been more than capable of handling the flow, but SATA throughput was not advertised and a lot less (~40MB/s on the top of my head... don't quote me) as the necessary flow > 80 MB/s. That cause strange problems with access to the disk.

  A mitigation could not use the built in PDM logging and advance to a producer-consumer architecture. I don't have time to test this theory, but it's a good direction for the people that run into this problem.

  My particular solution was to move to a RAID of PXI chassis to achieve speeds higher than the disk.

  Thanks to NOR for assistance.

• Need help with 6 33 sidebyside event log error questions

  I did a complete reinstall of Windows Vista.  The event log showed mistakes aside nearby.   This is one of the six - sxstrace.exe used for the information:

  Launch the activation context generation.
  Input parameter:
  Flags = 0
  ProcessorArchitecture = AMD64
  CultureFallBacks = en-US; en
  ManifestPath = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll
  AssemblyDirectory = C:\Windows\Microsoft.NET\Framework64\v2.0.50727\
  Application configuration file =
  -----------------
  INFO: Parsing file manifest C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Shfusion.dll.
  INFO: Manifest definition identity is shfusion, processorArchitecture = "X 86", publicKeyToken = "000000000000000", type = "win32", version = "1.0.0.0".
  INFO: Reference: Microsoft.VC80.CRT, processorArchitecture is "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0"
  INFO: Resolving reference Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50608.0".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the neutral culture.
  INFO: Application binding policy.
  NEWS: Control strategy of the Publisher C:\Windows\WinSxS\manifests\amd64_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_09bcb209fad07c27.manifest
  NEWS: Policy redirected assembly version Editor.
  INFO: The Post policy assembly identity it is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Start the detection of assembly.
  NEWS: Try to detect manifest to C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest found at C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: End detection of assembly.
  INFO: Resolving reference Microsoft.VC80.CRT.mui, language = "*" processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type is "win32", version = "8.0.50727.4016".
  INFO: Resolving reference for ProcessorArchitecture amd64.
  INFO: Resolving reference for the en-US culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Found no manifesto for the en-US culture.
  INFO: End detection of assembly.
  INFO: Resolving reference for culture.
  INFO: Application binding policy.
  INFO: No found publisher policy.
  INFO: No redirect political connection is found.
  INFO: Start the detection of assembly.
  INFO: Can't find the assembly in WinSxS.
  NEWS: Try to detect manifest to C:\Windows\assembly\GAC_64\Microsoft.VC80.CRT.mui\8.0.50727.4016_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
  INFO: Did not manifest for culture.
  INFO: End detection of assembly.
  INFO: Parsing file manifest C:\Windows\WinSxS\manifests\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_88dc01492fb256de.manifest.
  INFO: Manifest definition identity is Microsoft.VC80.CRT, processorArchitecture = "amd64", publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.4016".
  INFO: Activation context Creation succeeded.
  End activation context generation.

  The installation of windows vista has been very successful... Thank you!  I did a factory restore... had some conflicts and massive updates to do.  Problem was trying to do updates, especially for pilots, before the accidents that happen.  I managed to do it.  The only questions I could solve just not have been SidebySides mistakes.

  Thanks to YOUR INSTRUCTIONS FANTASTIC all sidebyside errors are now missing from event viewer. :)

  In case you might be interested, here's the historical data for net framework cleanup tool:
  History of changes
  -------------------

  December 3, 2007 - created the history file; any changes made before the creation
  This file is followed.

  December 4, 2007 - additions of extra cleaning for all versions of the .NET
  Framework on Tablet PC / Media Center, all versions of the
  .NET framework on Windows Server 2003, and all versions of the
  .NET framework on Windows Vista / Windows Server 2008.

  January 23, 2008 - addition of registry values to remove .NET Framework 1.0
  and 1.1 patches that were previously left out.

  29 January 2008 - addition of the product codes for .NET Framework 2.0 SP1, 3.0 SP1, and 3.5
  RTM versions.  Added a few 3.0 and 3.5 directories that have been
  already be left on the system.

  February 4, 2008 - added the cleanup who were initially registered on jobs
  December 4, 2007, but was inadvertently deleted.

  March 5, 2008 - fixed problem of deletion of registry which may affect 64-bit operating systems.

  March 6, 2008 - fixed an error of advapi32.dll on some caused by the previous operating systems
  Difficulty.

  April 30, 2008 - codes added product .NET Framework 3.0 beta to the list of
  items to remove during cleanup of .NET Framework 3.0.

  June 5, 2008 - corrected a problem with recovery of the Windows directory
  systems with active Terminal Server Services.

  June 6, 2008 - adding a /u switch to allow to run in unattended mode (which
  Displays the progress page but no other Interface and will require
  no user intervention).

  June 9, 2008 - disable the readme file and log file buttons if the tool is underway
  run in unattended mode.

  July 22, 2008 - added logging for detection of version of .NET Framework.  Update
  the tool to set the title of the window in cleanup.ini.

  August 14, 2008 - added support for the .NET Framework 2.0 SP2, .NET Framework
  3.0 SP2 and .NET Framework 3.5 SP1.

  November 26, 2008 - fixed a logic problem that caused the cleaning tool for not
  Delete the values to register 32-bit on Windows 64-bit versions.

  December 22, 2008 - added the version string is added to the log file.

  July 24, 2009 - added logic to properly clean the .NET Framework
  Windows 7.
  Added detection and logging for the .NET Framework 4.
  Avoid cleaning of mscoree.dll on Vista and higher.

  October 27, 2009 - fixed problem of withdrawal associated with VC ++ runtime files on Win9x
  and Windows 2000.

  October 29, 2009 - fixed problem of withdrawal associated with runtime files in VC ++ in the
  %WINDIR%\WinSxS directory on some operating systems.

  November 30, 2009 - fixed some problems of deletion of registry values that control which
  products appear in Add/Remove programs.

  December 9, 2009 - added logic to treat some types of errors and warnings if the tool
  don't report breaking in some specific scenarios.  Added a few
  new files and to remove .NET Framework registry keys
  steps of cleaning 3.0 and 3.5.

  March 17, 2010 - force the process exit code to get spread
  for the self-extracting installation package.

  April 29, 2010 - added support to clean the .NET Framework 4.

  November 16, 2010 - added logic to clean the cache of .NET Framework 4 police service
  record.

  December 31, 2010 - add a logic of protection against infinite loops when the withdrawal of
  registry keys.

  January 17, 2011 - fixed a bug that prevented the .NET Framework 4 available
  as an option of cleaning on Windows Server 2003 (x 86).

  August 16, 2011 - fixed a bug that prevented mscoree.dll come off, on some
  x 64 versions of Windows.

  19 October 2011 - add a command line switch to allow users to force cleanup
  a version of the .NET Framework even if BONE conditions normally
  could stop him.  It is a switch intentionally undocumented
  and should be used only in rare cases where the user includes
  the impact.

  Thank you once again for a happy Vista user!