Logging off / standby mode

Similar Questions

• newspapers in restoration online disabled in standby mode

  Hello
  Why they do it again online record cleared the database shall ensure that when they are not used continuously. Each time the log changes occur in the main site why online log files are disabled in standby mode

  Sekar_BLUE4EVER wrote:
  But why is the State of online redo logs in standby mode, changing each time when there is a log switch in primary education.

  Read this note * online Redo Logs on physical Standby [740675.1 ID] * it will be clear to you.

• It is best to turn off or leave my iPad in standby mode

  It is better to turn off or leave my iPad in standby mode?

  I let my off overnight, but connected to a power source to keep the battery charged.

  Alternatively, you can stay in mode 'sleep' but just keep an eye on the battery.

  If you don't see the percentage of battery on the screen, tap settings > battery then switch battery percentage ON.

• off or in standby mode

  For the purpose to protect the computer against power surges and lightning put a computer in standby or Hibernate mode computer protection or is the computer always also vulnerable, as if it was on. My basic understanding is there is not much difference between the computer being on and the mode 'sleep' other than the startup time and that the only difference would be the cost of electricity of the underway on computer. When the computer is "sleep" mode is in vulnerable to viruses that may be in a network system?

  Is it better to use the "standby mode", leave the computer or turn it off?

  For the purpose to protect the computer against power surges and lightning put a computer in standby or Hibernate mode computer protection or is the computer always also vulnerable, as if it was on. My basic understanding is there is not much difference between the computer being on and the mode 'sleep' other than the startup time and that the only difference would be the cost of electricity of the underway on computer.

  It adds no physical protection as well as possible damage to the components.  If it is in hibernation or hybrid sleep, it is protection against the loss of data, corruption of an incident because of the power loss (assuming that no ups is in use).

  When the computer is "sleep" mode is in vulnerable to viruses that may be in a network system?

  N °

  Is it better to use the "standby mode", leave the computer or turn it off?

  Better for what? The purpose of the standby or Hibernate mode is to give you a faster startup.  If you are concerned about the storm unplugging it is preferable. 

• Portege 7140CT Shutting Down in Standby Mode - cannot close normally

  Hello. I bought a laptop Portege of CT 7140 for my son. It is a very good unit but has a "Shutdown" problem - only it used to closing, that is. It seems to power off, but the 2nd of the LHS on the front of the device flashes slowly. The user's guide explains what happens when the device goes into "Standby" mode I tried all the options of FN + F3 (off, standby and Hibernate) with no difference. I disabled the feature key installation in the Panel. I disabled the "Hibernate" mode in the control panel. All to nothing does not. Someone at - it an idea why this is happening and how can I solve? Thanks a lot for your help. Mike

  Hello

  I never heard of this problem, but maybe to reinstall the system can solve it.
  Or perhaps reinstall or update the BIOS will help you.
  I'm sorry that I don't have a better idea.

  Good bye

• L50 - A - 160:USB of power in standby mode satellite is disabled but it STILL works

  Hi all!

  It's my L50-A-160.

  USB power standby is disabled in the BIOS but it always on!
  Nothing helps.
  As I can not turn off wakes on keyboard events. BIOS 1.30.

  Thanks for the advice in advance.

  Hello

  You are talking about sleep function & expenses supported by some USB ports?

  Be aware that not all media ports USB Sleep & Charge and only marked with a small sign flash USB ports would give such function.
  As far as I know on Satellite L50-A-160 only USB 3.0 (on the right side) would support this sleep & Charge USB.

  The charge & sleep can be enabled and disabled in windows.
  Go to desktop-> Office Assistance (in the task bar)-> utility tools & -> Control Panel

  There you should find the different tabs and one of the tabs should have sleep & fresh / tab sleep & music which allows you to set advanced features for the mod, Hibernate standby mode and stop mode.
  Simply move the slider to activate or deactivate the function sleep & Charge.

  But the sleep & fees may not work with certain external devices even if they are compatible with the USB specification. In this case, turn off the power of the computer on the charging device.

  You should also be known that when sleep & cool man of wake-up function is activated USB does not work for the compatible ports.

  In addition, there is an option called function in battery Mode. This option can be used to toggle the sleep & Charge in battery mode. It also displays the remaining capacity of the battery.
  Simply move the cursor to enable or disable this feature.

  By the way: read the user 95 manual page. It would be useful for you.

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• Windows Vista hanging at "Logging Off" of the prcoess judgment stage.

  At the stop, Windows went to automatically install updates and shut down my Dell portable computer. But he is now stuck at the step "Logging Off" and not shut down, even after hours. When I stopped manually and restart, it just goes back to the "Logging Off" screen and I can't do anything else. Several shops here have said they need to do a thorough cleaning of the hard repair disk in order.  Really? Is there another way to get the computer to block this process?  Thank you.

  Amanda,
  If you are still having this problem then validate with what version of Windows you are using.  First thing to try is to start on the Advanced Boot options , and select the last known good configuration.  If this does not work, then try to start safe mode.  Let us know the status.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Switch 10 (64 GB, 1920 x 1200) - BSOD in standby mode (standby)

  Hi people,

  I have a stable problem with my new Acer Switch 10, 64 GB model with screen 1920 x 1200 - if I pass automatically in standby mode (standby mode), I have about 50/50 to find it restarts when I come back to it - at some point during sleep, it falls in a "your computer has encountered a problem and needs to restart. It was 1 day of use - I encountered this already 10 times, that's why I decided to ALWAYS switch off the shelf by judgment. This is not very practical. I checked with BlueScreenView minidump files - error is still the same, catches of attached check screen

  

  

  Should I send it to the service? WIndows is preinstalled, all including the BIOS updates are installed.

  Minidumps can be downloaded here - https://drive.google.com/folderview?id=0B7Gf-eniqaBzdlBwa0pWeDhSNWc&usp=drive_web

  After I've sent my crashdumps bugtracker VirtualBox I pointed a wireless driver for Realtek which seems to cause the problem. Unfortunately the version installed is the last provided acer.com on in support area - v3007.2. I had to look for a newer version of this driver and managed to find an HP website. More details can be found here - https://www.virtualbox.org/ticket/13902

  The new (v.3007.6) driver for Realtek RTL8723BS wireless SDIO card can be downloaded here - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=ru&lc=ru&dlc=ru&softwareitem=ob-140101-1

  In addition to solving my problem, it also fixes ad one when sometimes wifi connection becomes limited and no network do not appear until the reboot (or sometimes assisted flight mode). I recommend all users to Switch 10 update their drivers. It's a shame that Acer provides no drivers on the official site updated.

  Problem solved.

• Cannot restart; Function F8 does not work; stuck at "restart windows." Put in standby mode.

  Put the PC into standby mode.  Stuck in the status of "Recovery of Windows".  Impossible to restart.  Power off several times.  F8 doesn't work no more.

  I don't think that XP shows a message "Windows Recovery" when it comes out of Stand By.

  It does when it's Hibernation.

  If you've been cycling power, you can have damaged your system files a bit and should probably start by running a chkdsk/r from the XP Recovery Console.

• Suddenly I can put is no longer the computer in standby mode manually or automatically.

  Original title: Control Panel - Power Option

  Suddenly I can put is no longer the computer in standby mode manually or automatically.  I can only turn off or restart.

  Hello

  1. do you mean to say that the Standby button is greyed out?

  2 How long have you been faced with this problem?

  3. don't you make changes on the computer before this problem?

  Check the question in the clean boot State and send the same return. Also, contact the manufacturing of computer for BIOS update.

• WiFi turns off standby

  My WiFi settings are checked for WiFi never sleep; However, when my screen is off and the phone is in standby mode, after a short time the WiFi disconnects. When the screen is turned on, the WiFi connects again. I assumed that the advanced WiFi setting to 'Never Sleep' would prevent it allowing me to stay connected on Skype, etc all in fashion watches. This indicates a problem with the phone or am I missing something?

  I did a factory reset, but the problem persists.

  Maybe it's not the panacea... Let's see what happens if the OP goes into performance mode...

  y2whisper wrote:....you win this round mk(battery saver mode)
  

• Standby mode?

  I read that the wireless flash drive 'off' after ten minutes of inactivity. I would appreciate clarification:

  The reader has a standby mode where it can be activated wireless? (so that you can use in car remotely without having to press the button)

  If so, the four hours of battery life is defined as four hours of read/write access constant, or four hours of such a mode "stand-by"?

  4 hours battery turned on or continuously. WiFi radios are not turned off and there is no standby mode

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer stops when it is in Standby Mode

  Computer HP worked many years, now all of a sudden, when I put it in Standby Mode after a few minutes, she completely stops! When I hit the power button / I get tha warning Page indicates that the computer does not correctly turn off, and then it starts OK. I searched the forum and not seen someone with this problem. I am running Vista Ultimate SP2, 32-bit.

  Hi Kris,

  Using registry scanners is not recommended. Windows has aSFC Scan tool built in which scan repair/replace the missing or files corrupted. What are your settings under sleep (Start > Control Panel > change when the computer sleeps >change advanced power settings > Expand sleep)?

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.