Logitch speakers are now recognized as UAC3556B

Similar Questions

• My Cyber Acoustic speakers are not recognized.

  My Cyber Acoustic speakers are not recognized. They are turned on and I hear static, but no sound. Help, please!

  http://www.cyberacoustics.com/product-FAQ

  watching these videos on how to install

• The speakers and headphone devices are passed around. (speakers are now set as headphones)

  I was going through my sound settings and then all of a sudden the headphones and speakers device device swap and my sound sticks to the top and sometimes works and sometimes doesn't. Especially when im on the internet the sound does not work.

  Help, please!

  Its working properly now with the names wrong so I changed the name back to the speakers and now I hope that it stays that way

• My helmet speakers are out - prioritize my built in Mic headset

  After finding that the microphone of my helmet (which I thought was broken, since he has never worked on my computer) works very well on my phone, I started to focus on why I can't hear out of it on my computer. Apparently when I set up a microphone on Realtek HD Audio Manager, my helmet speakers are used as the microphone instead as it is built in mic.

  Anyone know if there is a way I can fix this? Thank you

  If you use headphones 'style phone helmet', in other words, only Jack and 3 connectors, his computer map ports usually do not support 3way plugs as you have, only 2 (or in the case of mic).

  You most likely will need a headset with a plug for speakers and a microphone. The microphone can be recognized in the port of real, but pregnant mic (on headpones) will not work.

  It is a hardware limitation, your phone has a different take than your computer does (very probably).

• FireWire devices are most recognized. External hard drive and the camcorder will not connect.

  My computer no longer recognizes the firewire devices that I connect to it.  The Device Manager shows the driver 1394 work very well.  I even deleted and reinstalled Windows XP.  My external hard drive so my camcorder are more recognized when I plug them cold or hot plug.  Two of them have worked very well for more than 4 years and now for some unknown reason, that they stopped just recognized.

  How can I get Windows XP to see again them?   I've tried everything.

  Hello Stevec5375.

  See the link below.  There is a fix for those running XP with multiple Firewire devices, thus causing a problem.

  http://support.Microsoft.com/kb/830987/en-us

  Please let us know if it did or did not help to solve your problem.

  See you soon

• Some tags are not recognized at all (mp3/ogg, always full albums)

  Hello!

  I encountered a strange problem. My rocket recognizes not all my files tags. — about 1/3 of my songs appear as 'unknown' as 'unknown '. My question is, someone bumped into what whether similar? I tried searching this forum but can't find anything similar.

  It's a little weird, like:

  • They are always full albums that are not recognized (i.e. newer than a part of an album).
  • I have not found a common application for the albums, tags are not recognized;
  • Some of them are MP3 (id3v2.4 I presume), some are OGG,.
  • some (most) is torn apart by myself CD, some are not.
  • I have them checked (of course) on the computer and all my software recognizes the tags.

  For example, 4 8 Weather Report albums are "unknown" - and one of them is OGG, MP3 3 and 4 which ARE recognized, 3 are OGG and 1 is MP3. I have my albums organized in the manner of MUSIC/artist/Album folders / *. [mp3/ogg] on the "rocket".

  All have been (re) marked with easytag, in fact, that I have recently relabelled/checked the tags of my entire collection with easytag (to ensure that it is usable on the "rocket"). There must be something wrong with my tags. I tried to format the device (in the menu), reset the database by deleting the device, but it does not... help on the updating of the database that is the same files that do not have recognized, however.

  Any suggestions or ideas?

  Thanks for your help!

  Hi again!

  And, thanks to the advice of sansafix, this problem is now solved!

  It seems that id3v2.4 was the culprit - my files under 2.3 relabeling them does the job. In addition, my OGG files were (and still are) the ID3 tag, unlike what I thought. But now they are 2.3 work also.

  Don't know why some of the tags did work, however, even though they were all 2.4 - but their relabelling as 2.3 made it all work in any case. Also, in easytag, I can't seem to be able to prevent OGG files of the ID3 tag, I can only it stop him marking with ID3 alltogether (which is not nice, because I have MP3 and OGG). There is an option to avoid tagging FLAC with ID, however. Maybe I should post a feature request for the guys of easytag, this should be easy to implement...

  I have my tags to format UTF-16 also and did not encounter any problems (yet - my rocket is still so new I don't have time to see all the songs with characters & foreign languages).

  But, in any case, thanks again! Very useful forum, it is indeed.

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• When I plug my headphones in the front jack 3.5 external speakers are NOT dumb

  Hello

  I recently reinstalled Vista Ultimate on a bigger hard drive, but now I have a problem with my audio devices.
  (1) when I plug in my headphones to the port of front 3.5 mm external speakers are NOT dumb.
  (2) the only way I can switch from headphones and speakers is by right clicking the speaker icon in the notification area, click playback devices and "Set is device by default", followed by restart the video or itunes.
  Can someone help me with this.
  In addition, and I don't know if it's related, but in device under 'Other devices' management, the SM Bus controller has a yellow Triangle with an exclamation mark inside.
  Thanks in advance for any help
  Concerning
  Rob

  This is controlled by the hardware itself or the driver software.

  You can try to install the latest audio drivers available from the manufacturer.
  If this does not work, you can try to contact the manufacturer for assistance.

• speakers are connected but not detected! Help, please!

  I tried to plug in my sound souround in my lap. Well the wires accidentally touched something and then there is a loud noise, of course, we were surprised & so after numerous attempts, trying to have his surround for the computer, we couldn't hear anything so I gave up & just connect the speakers to the computer again in the tower. Well we couldn't hear anything now! I tried to watch a movie and NOT of HIS! We tried pluggin helmet & still nothing! & now even if the speakers are plugged and his saying that the speakers are not detected even if their plugged in! But if I check the sound I can see that the lines for the volume are moving up and down, but we can't hear anything! so I called a computer tech and he said that sometimes the sound is changed well I changed the sound and he was trying to detect the speakers, but it is still saying that nothing is plugged into the Speaker Jack when they are! Computer Savy not so much need help please! Blow something?

  Hello

  The steps in the article would solve that problem.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Also, try to use the same system on another computer sound and check if it works well.

  Let us know the status of the issue.

• Cc of Lightroom will not import my files, it is said that they are not recognized, why it doesn't matter that a DNG and not a raw file, I use a canon 5 3

  Can someone tell me why Lightroom cc wants to import my files under a DNG, I used to import as a raw file, it says the files are not recognized, I use a Canon 5 3 and never had the problem before, he said actually the Raw Format is not supported in Lightroom.

  Thanks in advance John.

  Hi, dj_paige,

  I managed to sort it out, the problem was when I used my Kingston card reader to import my images in LR Cc, it would not recognize the file format, so when I thought a little more, tired of importing directly from my 5 d 3, it worked very well, so now I need to find a card reader supports LR CC ,

  Thanks for your reply, regards, John.

• speakers are weak

  Hello

  I have a macbook pro (17-inch, mid 2010) 2.66 GHz Intel Core i7 and I'm under Beta Sierra 10.12.1.

  Recently I noticed that my speakers are extremely low.  With headphones it's correct, but without, I need the room to be completely silent - not even a fan runs - in order to hear.

  I'm tempted a restart of P R command-option without a bit of luck.

  Any suggestions?

  Chris

  I don't understand what you mean by "low"?

  Have you tried a reset the NVRAM?

  https://support.Apple.com/en-us/HT204063

  Ciao.

• After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  What do you mean on your laptop more?  Please provide details.

  Best,

  GDG

• I've just updated to 25.0 and I noticed the drop-down history menu has been simplified and back, forward and home are now gone. These can be restored?

  I'm running on a Mac (Lion) with 25.0 FF. I usually hide the toolbar because I like the most on my screen space without having to switch to full screen mode. So I usually use a custom keyboard command to navigate forwards and backwards in my browser session, but sometimes the keyboard command fails and the page does not. In the past, all I had to do was go to the history of the menu drop-down and choose "Back" or "Forward." I also use the selection 'Home' to return to my home page. But since I updated to 25.0 these choices are now gone in the history menu.

  Is it possible to restore them? And are they gone for all users (was that a global change) or one of my addons just aren't playing nice and causing this problem? TIA!

  The following article, the keyboard shortcut for home on MacOS X is option + home.

  Hotkeys - quickly perform common tasks of Firefox

  Note: If the Windows keyboard shortcuts article appears, check the editing tools section in the left column to select the correct operating system.

• Two days ago, that I've updated to El Capitan. Mail has already had several cases in which I had stored newsletters by e-mail, as well as the tutorials of the line. They are now gone. Is any way to recover these e-mails lost?

  After the installation of El Capitan record notes went from mail. In addition, I had 3 e-mail folders in which were stored newsletters, an online tutorial email collected over several years. They are now gone. Is there a way to retrieve these messages lost? Very unhappy with El Capitan.

  Try hovering on the side right of the on my Mac + show

  

• Tab Utilities is not compatible with FF17. Thousands of users are now without an essential add-on. Is there a solution?

  This module is an important for me and thousands of other institutions. Unfortunately, this very useful add-on and the feature has now gone to my FF from 17... Many people are without downgrading or refusing to upgrade only because it will break this add-on.

  In FF17, a major change was made to the return value of the function tosource beat not only this but many other modules as well. Now I don't have a problem with a change in standards and demanding that everyone to update the code to work with it. But this has been managed in completely the wrong way by Mozilla IMO.

  Where is the support for the community of the add-on that has loyally supported your product all these years and giving them a good chance of migration/change code works with the new function return values?
  Why is there no timetable with a phase-in plan and a date limit for these changes?

  Heck, a phase-in plan could include a period of transition where the service would support two methods by issuing an additional parameter for the new feature. Then you can switch the main return gradually to be the new format. The existing plugins path would still be fine.

  It seems a little horrible from the end-user point of view suddenly not having this nice tool that enhances the experience of firefox so much. I know that many feel this way even on this add-on I've seen countless comments on it, and I'm sure that many others feel that way about the modules they use and which are now broken too.

  I am writing here to ask Mozilla to propose a fix, or the whole community to see if there is a workaround/half measure that could be found. Perchance write a function JS that could be included/injected in the addons broken convert/reformat the response to this function call so it remains usable to them with the data they need?

  I really hope that someone can find a temporary solution for everyone until more permanent can be developed.

  Thanks for reading...

  Looks like the author has published an update: https://addons.mozilla.org/en-US/firefox/addon/tab-utilities/versions/?page=1#version-1.5pre1