My Cyber Acoustic speakers are not recognized.

Similar Questions

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• Speakers are not reinstantiate sound on the internet.

  My speakers are not reinstantiate sound on the internet. I can listen to music from the computer, but when I go on Inernet, for example on you tube, my speakers aren't reinstantiate sound, and I checked all the buttons, they are ok. Can someone help me?

  Hello

  ·         This happens with all sites or only with little?

  ·         How long have you been faced with this problem to?

  ·         Remember to make changes to the system?

  ·         What version of Internet explorer that you are using?

  Method 1:

  Maybe it's that there is a problem with the flash player, I suggest to uninstall Flash and reinstall and see if the problem still occurs. Click on the link below.

  Uninstall Flash Player

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Once you uninstall Adobe and then try to download Adobe Flash player Adobe website form. Click on the link below.

  http://get.Adobe.com/flashplayer/

  For help, see the article mentioned below.

  Troubleshoot Flash Player installation | Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Method 2:

  I suggest you to optimize internet Explorer and see if the problem still occurs. Follow the steps mentioned in the link mentioned below.

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• Some tags are not recognized at all (mp3/ogg, always full albums)

  Hello!

  I encountered a strange problem. My rocket recognizes not all my files tags. — about 1/3 of my songs appear as 'unknown' as 'unknown '. My question is, someone bumped into what whether similar? I tried searching this forum but can't find anything similar.

  It's a little weird, like:

  • They are always full albums that are not recognized (i.e. newer than a part of an album).
  • I have not found a common application for the albums, tags are not recognized;
  • Some of them are MP3 (id3v2.4 I presume), some are OGG,.
  • some (most) is torn apart by myself CD, some are not.
  • I have them checked (of course) on the computer and all my software recognizes the tags.

  For example, 4 8 Weather Report albums are "unknown" - and one of them is OGG, MP3 3 and 4 which ARE recognized, 3 are OGG and 1 is MP3. I have my albums organized in the manner of MUSIC/artist/Album folders / *. [mp3/ogg] on the "rocket".

  All have been (re) marked with easytag, in fact, that I have recently relabelled/checked the tags of my entire collection with easytag (to ensure that it is usable on the "rocket"). There must be something wrong with my tags. I tried to format the device (in the menu), reset the database by deleting the device, but it does not... help on the updating of the database that is the same files that do not have recognized, however.

  Any suggestions or ideas?

  Thanks for your help!

  Hi again!

  And, thanks to the advice of sansafix, this problem is now solved!

  It seems that id3v2.4 was the culprit - my files under 2.3 relabeling them does the job. In addition, my OGG files were (and still are) the ID3 tag, unlike what I thought. But now they are 2.3 work also.

  Don't know why some of the tags did work, however, even though they were all 2.4 - but their relabelling as 2.3 made it all work in any case. Also, in easytag, I can't seem to be able to prevent OGG files of the ID3 tag, I can only it stop him marking with ID3 alltogether (which is not nice, because I have MP3 and OGG). There is an option to avoid tagging FLAC with ID, however. Maybe I should post a feature request for the guys of easytag, this should be easy to implement...

  I have my tags to format UTF-16 also and did not encounter any problems (yet - my rocket is still so new I don't have time to see all the songs with characters & foreign languages).

  But, in any case, thanks again! Very useful forum, it is indeed.

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• When I plug my headphones in the front jack 3.5 external speakers are NOT dumb

  Hello

  I recently reinstalled Vista Ultimate on a bigger hard drive, but now I have a problem with my audio devices.
  (1) when I plug in my headphones to the port of front 3.5 mm external speakers are NOT dumb.
  (2) the only way I can switch from headphones and speakers is by right clicking the speaker icon in the notification area, click playback devices and "Set is device by default", followed by restart the video or itunes.
  Can someone help me with this.
  In addition, and I don't know if it's related, but in device under 'Other devices' management, the SM Bus controller has a yellow Triangle with an exclamation mark inside.
  Thanks in advance for any help
  Concerning
  Rob

  This is controlled by the hardware itself or the driver software.

  You can try to install the latest audio drivers available from the manufacturer.
  If this does not work, you can try to contact the manufacturer for assistance.

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• Peripheral USB are not recognized

  Original title: USB drivers

  My mouse, printer and mobile device are not recognized or functioning when plugged into the USB ports. They seem to be fed, but that's all. When I run MASTS (Microsoft Automated Troubleshooting Service), it scans and concludes that "material changes may not have been detected. He said he applied a fix but still nothing works.

  Try to reinstall the chipset drivers of your PC manufacturer or the manufacturer of the motherboard, if a generic PC

• I get this message your Skype name and password are not recognized what should I do

  original title: Skype
  I get this message your Skype name and password are not recognized what should I do

  Look at the Sticky Thread at the top of this page.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/where-do-i-get-Skype-support/3ae98b5e-566c-4D8C-B189-37b50e475539

• My USB devices are not recognized, but they have a power

  My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.

  I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.

  My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.

  It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.

  I would really appreciate help with this

  Hello

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  I would also ask you to contact the manufacturer of the computer to help.

• New camera.  LR. Don't let me import the photos in the new camera.   Get the following message: some import operations have not been executed.  The files are not recognized by the raw format support in Lightroom...  Application of point 4.4 of Lightroom. 

  L.R., I cannot import the photo of the new camera.   Get the following message: "some files are not recognized by the raw format support in Lightroom."  Click below to view a version update of Lightroom.   Done this and updated Lightroom 4.4.   Still cannot import - get the same message.

  Devices supported by Adobe Camera Raw

  The D610 requires LR version 5.3 or newer.

  If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• I recently bought a Canon 5 d camera SR and when I imported the photos taken in Lightroom RAW gave me the following message: "files are not recognized by the RAW format support in Lightroom (73)" what should I do?

  I recently bought a Canon 5 d camera SR and when I imported the photos taken in RAW, Lightroom gave me the following message: "files are not recognized by the inLightroom of support for the RAW format (73)" what should I do?

  Hello

  Looks like you may not have the latest version of Lightroom as the Canon 5 d R raw files are supported in Lightroom 6.0 and above (not in previous versions)

  Devices supported by Camera Raw