Logitech Z205 speakers capture a specific Port

Similar Questions

• Application of force to use specific ports

  Hi all
  I have an application that uses random ports.  This could be good behind a typical personal router, but is not possible with the current implementation.  The program is an application of video conferencing with Polycom collaboration, and the app is telepresence m100.
  The release notes for m100 indicate a few random ports are used for some protocols.  (See page 21)  Our network firewall device requires a game port assignment and our security protocols do not allow an open machine.  We would also like to use this m100 of telepresence on multiple machines, so a DMZ is not an option.  The application does not allow the user to select specific ports.  Request support with Polycom has been less then helpful (answer: it uses a random port).

  So here I wonder if there is a way on XP or 7 to force an application to use ports or range of ports, perhaps 4-5 assigned ports, not 65535.  The nature of the beast requires several ports open, not one.  Also, remote machines will have the same configs, so one of these machines could initiate/receive calls with all the others.

  John

  Questions of this nature are better asked on Technet

  http://social.technet.Microsoft.com/forums/en-us/categories/

• LRT224 Port forwarding of specific Port

  Is it possible with this router to do port forwarding on a specific port to a pc?

  I have a basic need:

  Transfer the incoming request to WAN port 37777 to RDP port 3389 to the local server xxx.xxx.xxx.xxx.

  I try to do a formward configured like this:

  Service: 37777 (custom)-37777

  IP address: XXX.XXX.XXX.XXX:3389

  But I can't save this configuration (wghite page is displayed).

  How can I access with RDP on my public IP address on a specific (not the standard 3389), the port of my business and be sent to a specific server?

  for example: RDP at yyy.yyy.yyy.yyy:37777 connects to the server local xxx.xxx.xxx.xxx

  So far, I can only access this server with rdp standard port on the public ip address.

  Thank you

  The LRT224 supports the translation of address of Port (PAT). With PAT, each computer on the LAN is translated at the same IP address, but with a different port number assignment.

• IP address to a specific port

  How can I assign an IP address and a specific port on a powerconnect switch 6224?

  Thanks for the explanation.

  When you connect two layer 3 devices, you need a network isolated between devices. The process is similar between Cisco and PowerConnect.  The difference is, as you said, you cannot set an ip address on the port itself with Powerconnect.  As you would with Layer 3 devices Cisco.

  Are the switch A and switch B of PowerConnect?  Or is a Cisco and the other Powerconnect.

  If both are PowerConnect.  You will need to create a VLAN to be only used to one port on each of the 2 devices.

  Switch to # config

  Switch database has (config) # vlan

  A(config-vlan) switch # vlan 2

  Switch A(config-vlan) # exit

  Switch to (config) # interface vlan 2

  A (config-if) # name of the L3 switch connect switch

  Switch # 192.168.1.1 ip address A(config-if) 255.255.255.0

  Switch A(config-if) # exit

  Switch to (config) # interface ethernet xxx

  Switch A(config-if) # switchport mode access

  Switch A(config-if) # switchport access vlan 2

  --------------------

  The B switch configuration:

  B # config switch

  Database switch B (config) # vlan

  B(config-vlan) switch # vlan 2

  Switch B(config-vlan) # exit

  Switch B (config) # interface vlan 2

  B (config-if) # name of the L3 switch connect switch

  Switch B (config-if) # ip 192.168.1.2 address 255.255.255.0

  Switch B (config-if) # exit

  Switch B (config) # interface ethernet xxx

  Switch B (config-if) # switchport mode access

  Switch B (config-if) # switchport access vlan 2

  Next, you will want to check to make sure IP routing table that's list a path to all networks on both sides.

  You will probably need a specific static route defined for networks or by default.

• By the way a specific port number

  Hell-o,

  My question is about the PIX515e. We have a Server Windows ISA firewall we want to retire. I need to move the ports that have been opened in this area of ISA for the PIX. On AIS, he simply says "send and receive port tcp 5510' for example. Is it possible on the PIX of this port is very simply to apply. Without having to create a static entry? A way to simply open a specific port number?

  Suggestions, ideas or advice greatly welcome,

  TIA,

  Gary

  Which starts the connection, the interface of high security to low or low security interface to high? If she is brought down, do nothing, it will allow by default. If it is low to high, you must 1) of static type and 2) an access list. The acl is not reference IPs, but it should (security reasons - the whole point of the PIX). For example:

  (1) static (inside, outside) subnet to the 10.10.10.10 x.x.x.x 255.255.255.255 mask (or use a range of IP addresses)

  or

  static (inside, outside) 10.10.10.10 10.10.10.10 (if nat disabled)

  and

  (2) access list 102 permit tcp any any eq 5510

  or

  access list 102 permit tcp any host x.x.x.x eq 5510 (better)

  or

  access-list 102 permit tcp host y.y.y.y host x.x.x.x eq 5510 (best)

  Access-group 102 in external interface

  It will be useful.

  Steve

• How to create and assign a VLAN to specific ports

  In our ISA550W, create the VLANS for different subnets and assigning them to specific ports are a piece of cake and self explanitory.

  However on a SG300-10MP, I am totally lost lol. I just want to make ports 7 & 8 set to a sous-reseau.10 instead of un.6 as the rest of the switch. I need these ports to be totally independent from the rest and not to communicate with others at all.

  How can I do this?

  Thank you!

  Hi Alex,

  Under management of VLANS, go into settings of the interface.  Change the interfaces that you use to access the ports by choosing the way you want by clicking on change.

  Once they are access ports back to Port for page VLAN and assign the port desired as one not marked in this interface.

  This should be everything you need, let me know if you have any other questions.

  -Good Trent

  * Please note the useful messages! **

• PIX Site to Site VPN to aid to specific port

  Good day to all!

  I know that to have establish a site to site VPN using 2 PIX firewall, it should be noted the interesting traffic on both sides. Usually, we make the following statement:

  accessList AllowedTraffic ip 192.168.2.1 allow 192.168.3.1

  But I thought what happens if specify us specific ports on the

  The ACL that is used for interesting VPN as HTTPS traffic? Like the one below:

  Acccess-list AllowedTraffic tcp 192.168.2.1 192.168.3.1 eq 443

  Comments would be nice...

  Thank you...

  Chris

  Here are my configs when I tested it. I hope this helps! If Yes, please rate.

  Thank you

• disorders connect logitech ls21 speakers too labtop with win 7

  I'm trying to connect my logitech ls21 speakers system to my labtop which is windows 7, in the manual, there is no step by step for windows 7 could someone tell me how to set up these speakers to windows 7

  Hello

  Method 1:

  Check if your headphones are configured to be used as a Communication device by default instead of the default device, or if the two devices are configured by default. If so, that the fault of headphones, so that Windows will only use when they are connected.

  Check volume settings.

  (a) right click on the speaker icon in the taskbar, then select volume control options.

  (b) click a checkbox on "all devices evolving sound.

  (c) make sure that you have "Default uncontrolled communication device".

  (d) place a check on the speakers and headphones.

  Method 2:

  I also suggest you to see link and check.

  Connect one microphone, music player or other audio device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  See also:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Network ACL two specific ports

  As I know there is no way to set ACLs for network such that only two specific ports are available. I'm using Oracle 11 g 2.
  
  I would like a HTTP and SMTP port opened for local loop address. These are ports 7777 and 25. It is my understanding that you can have only one of the ACL for each host. While it seems that you can create others, any additional ACL for the same host does not always work as expected. So does anyone have tips that how can I do this? I'd rather not have all ports between 7777 and 25 available but this is what I currently have...
  
  DBMS_NETWORK_ACL_ADMIN. (ASSIGN_ACL)
  ACL = > 'local_loopback.xml '.
  , host = > "127.0.0.1"
  lower_port = > 25
  upper_port = > 7777
  );

  Captain Egg wrote:
  As I know there is no way to set ACLs for network such that only two specific ports are available. I'm using Oracle 11 g 2.

  Not the case in my experience. An ACL can be for a specific purpose, but contain multiple ports for this purpose.

  For example I assign ports 80, 8080, 7777 and some others, in a single web - acl.xml, to a target of network (host or domain).

  Read the usage notes in the PL/SQL package of database, Oracle®, and reference Types.

• How to restrict multicast traffic to specific ports on GS716Tv3?

  I can not find specific instructions to limit traffic of multicast on the smart switch GS715Tv3.

  I need to force all multicast traffic to travel on a specific set of interfaces, or at least stay within a given virtual LAN on the switch to which it is native. All the changes you want multicast servers and listeners will be on these interfaces in their separate vLAN.

  We have several GS715Tv3 switches configured identically, but multicast traffic does not pass between the switches.

  Topology:

  Eight GS716Tv3 smart switches, each configured with three VLANS identical.

  No traffic should pass between these VLANS on the switch or pass between the switches

  In other words, even if all the 8 switches each have a vLAN named "IOSubsystem", I do not considered the same vLAN.

  .

  vLAN 4 is corresponding to the hosts of Linux to address major

  vLAN 5 is for the audio subsystem

  vLAN 6 is for the IO subsystem

  VLAN each switch 4 has two active ports, a session to the external interface of the main Linux host and the other to a central switch of 9th GS716Tv3 where a system of software development is also linked.

  VLAN each 5 switch connects to the components of the audio subsystems (not shown).

  VLAN each switch 6 has two active ports, a going inward a lead Linux host interface and one for the IO subsystem.

             -> [vLAN4 | g10]---> [Switch #9]-+.
  
             -> [vLAN4 | g9]-> [Linux host #1: eth0]                 |
  
  [Switch #1]-> [vLAN6: g1]-> [Linux host #1 | eth1]                 |
  
             -> [vLAN6: g2]-> [e/s 1 subsystem]                   |
  
                                                                |
  
             -> [vLAN4 | g10]---> [Switch #9]- +---> [software Dev host]
  
             -> [vLAN4 | g9]-> [Linux host #2: eth0]                 |
  
  [Switch #2]-> [vLAN6: g1]-> [Linux host #2 | eth1]                 |
  
             -> [vLAN6: g2]-> [subsystem/o 2]                   |
  
  ...                                                           ~
  
                                                                |
  
             -> [vLAN4 | g10]---> [Switch #9]-+.
  
             -> [vLAN4 | g9]-> [Linux host #8: eth0]
  
  [Switch #8]-> [vLAN6: g1]-> [Linux host #8 | eth1]
  
             -> [vLAN6: g2]-> [i/o subsystem #8]

  We get multicast traffic unwanted between each of these systems, causing corruption of our stream. We limit the multicast traffic on vLAN6 of each switch to stay on the vLAN6 of this specific switch.

  Thanks for any help.

  To switch the management VLAN to 4.

  Make sure you have 2-way switch, one in VLAN4 in a VLAN1.

  4 and apply the value of the system you use to a static IP address to the switch and confirm the access to the web configuration and then change "management VLAN ID. then pass the system that you use on the port or any VLAN 4, then you should have access, otherwise, wait about 60-90sec and try again, because you might have PLEASE and it will block anything on the port for just under its set to "Enabled" 'Fast Link '.

  Then under "IP Configuration" value switches other IP address in IP range of VLAN4.

  For the love of Simplisicty, unmarked ports should never be in 1 VLAN simultaneously.

  And instead of using the point and click, goto "Port PVID Configuration" and just create the VLAN it.

  Member of the PVID and VLAN the same thing for a port, on what VLAN, it must be in the database

  And to confirm, you have a cable from switch to each VLAN? You can cut down on cables and ports if you tag/trunk ports to the next switch. then all VLAN 3 just 1 cable between each pair of switches, saving you at least 4 ports on each switch.

  Just an example of my GS724T (ignore ports g8 and g-19-20, their current PVID is because of something else you do not, LACP and Span/Monitoring):

  All ports are configured to a single VLAN, my 'LAN hand' is VLAN12, that the management VLAN is set for, g23-24 ports VLAN trunks, they are set on tagg VLAN12 and 14 when the traffic is out of these ports, then switch to the other side reads the consequence tagg and acts, that way I don't need 2 cables/port for each of them.

  

• capture card specifications

  What specifications must be met for an image / video capture card, as I know it works with Labview?

  Thank you.

  Are you referring to an acquisition of a camera card? If you want to know if an acquisition card non - OR can be used with Labview, see this KB: I can use third party My Frame Grabber with the screws IMAQ?

• that point jack access to logitech 11 speakers audio modem Dell

  Logitech ls11 2.0 stereo speaker system

  Windows xp System Professional version 2002 service pack 3
  Audio SoundMaxDigital? What is my sound card?
  Instructions followed to install power is on but no sound... all the volumes that are put in place, not on mute
  Tried to test the sound, but nothing is happening
  Turns on but not a House!

  Hello

  Why you connect the speaker to the modem?

  The speaker must be connected to the rear Jack of the processor.

  You can connect the speaker into the back of the CPU & check if it works.

  Reference: To set up the speakers

  Hope the helps of information.

• Warn if there is no communication on a specific Port

  Hello

  I'm looking for a solution monitor network traffic coming from specific IP address and Port 192.168.1.1:80 for example. If there is no packets transferred on Port 80 in the last 15 minutes the NMS should generate an alert.

  Is this possible with Foglight NMS?

  I thought about the flow of network traffic, which monitors traffic. But did not find any alerts that can be generated.

  Or any other tool that can help me with this problem?

  THX

  Hello

  This feature is currently unavailable. You can control whether a port is open or closed. You can also set an alert if traffic is zero in a period of time, but it will be evaluated for always guarded port.

  Best regards

  Jonas

• Webcam C910 HD Logitech does not CAPTURE on 64 bit, Win 7 ASUS but catch to end the play on 32 bit win 7 Dell as it always has?

  Webcam C910, Logitech HD worked and still works on Win 7 Ultimate 32 bit computer desk Dell, beautiful camera, however, I bought an ASUS laptop 64 bit and got Win 7 Ultimate on it too and the cam will run Skype, different sites with interaction cam FINE, but when you ask it to capture the photo of my cat , he returned and said 3,2,1, (as he always does) and says "CAPTURE FAILED".  This applies also to video on Logitech C910, just WONT CAPTURER.  I tried too many things to list, enter 12 hours with the Technical Support of Logitech divided into 4-5 calls and they are very polite but ultimately say something like 'check your reverend DirectX' well, it's new 1st class line superior ASUS laptop, also the last time, I talked to them, they said "ok, who does ", we will degenerate and call withiin 48 hours..." NO CALL... they do not have a difficulty still in their box, it claims Win 7 32 & 64 bit.  Anyone got any ideas?  Tried deleting on laptop internal cam, tried the drivers, like I said my list is VERY LONG, I quit as Logitech has apparently also.  Sometimes these things happen.  I hope that there is an intelligent person who ran into this and can help me.

  Last question, a person was very STRONG and answered a question of Fraps, I hope that I can be so lucky again.

  Thank you

  Joe_Kidd

  Guess what it was?  Logitech went through sending me boredom 920 HD Webcam FREE thinking that would fix it, there somehwhere they understood led aomething crazy Logitech and cost them tons of money...

  The person I spoke was absolute great fellow, he said, "save under" for attempted desktop capture, BINGO, it worked, so I went down in my own records and set a folder y calle C920 video and photos, tried it Win 7 says "Ok I let u do it too»

  My personal opinion, MS made restrictions of RULES TONS on Win 7 and not do good work to all the relay of messages to the public, I'm angry at Microsoft, a first time... I also have a couple other examples: I buy software and it comes to Outlook 2007, but of course it says 'OH NO '.< u="" cant="" download="" direct="" frim="" email="" unless="" u="" r="" an="" admin.......................i="" am="" an="">

  Solution, forwards to gmail, download it.

  In addition, if you have photos, videos, documents. projects, C++ files in one place on Win 7 it stain auto setting, you can't CUT and paste it somewhere else... I did copy, paste and in 2 places and delete the default location that doesn't WELL HE DELETED EVERYTHING.. . If you pasted what was in this folder in 10 others, etc then it removes all 10 places as it is in default, u try move and delete?  U R BIG TROUBLE because it deletes everything.

  I'm really fine with Windows, but Win 7 was madelike the old HP calculators, everything is back, full of blocks in the ability to do what that it is unnecessarily wasting space, I just flat thing it is worst OS they never go out, WIN 8's fate not so much "you must buy victory 8", MS is terrible in many ways although perhaps they realize has a terrible mess win 7 is and trying to run on the city as quickly as possible. Thank you

  Joe_Kidd

• Question - Win7 Home Prem... seeking to block a port. Recently, network multiple attacks of DoS.Generic.SYNFlood go a single specific port. Anyone know how to block a port?

  Recently, several attempted network using DoS.Generic.SYNFlood attacks.  All attacks are trying to come across 40 Port.  How can I block this port?  I checked the registry of Port number and 40 is unassigned... exactly why they use it.  Can anyone help?

  How can I block this port?

  http://www.sciencehq.com/infos/how-to-block-ports-in-Windows-7.html