Warn if there is no communication on a specific Port

Similar Questions

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Is there a way to make the LPT1 port EPP in Windows?

  Original title: is there a way to make the LPT1 port EPP in Windows?

  I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Windows?

  Hi RonaldEchols,

  ·         What is the model number of the device (printer)?

  ·         You use what version of BIOS (Basic Input Output System) and the motherboard?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• Is there an online community which deals with promotion within the Fed/DoD IT apple? Currently, I work for the NAVY and a nightmare HP NMCI. Thank you.

  It was more of a general question asking management and online community eventually the federal and/or DoD workers who might be unhappy with the current situation of technology of the federal workforce and so therefore could discuss, share and work information to try to improve this situation. Thank you.

  edhazelwood wrote:

  It was more of a general question asking management and online community eventually the federal and/or DoD workers who might be unhappy with the current situation of technology of the federal workforce and so therefore could discuss, share and work information to try to improve this situation. Thank you.

  «I currently work for the NAVY and a nightmare HP NMCI.»

  If you are now looking for a Mac NMCI nightmare? Evolution towards a Mac environment will do nothing to improve the NMCI environment.

  Why don't do you a Google search or speak to your personal COMPUTING support to discuss your NMCI questions? These forums are to help users of the Apple/Mac product with Apple/Mac product questions.

• Error: There is no communication between computer and printer

  Original title;

  printer not printihg after the installation of new updates

  I get messege there is no commacation between computer and printer

  Hello

  1. What is the brand and model of the printer?

  2. What are the updates that have been installed before the show?

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  3. have you checked the status of the printer in Device Manager?

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  4. what operating system is installed on the computer?

  You can Open the printer Troubleshooter and check if it makes a difference:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can follow this link and check if it helps.

  Printer in Windows problems

  Let us know the result!

• There is no communication between devices that are connected to the Linksys WAP4410N Wireless access point?

  Hi all

  I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.

  Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.

  Advance thanks.

  Thank you and best regards,

  Chandhuru.M

  Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

  The title of security without thread/how do you have isolation set up wireless?

  Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless

  Thank you

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  CCNA, CCNA-wireless

  866-606-1866.

  Mon - Fri 09:00 - 18:00 (UTC - 05:00)

  * Please rate the Post so other will know when an answer has been found.

• There is a communication problem with the iTunes store

  Apple TV 3rd generation, software to update... Am able to stream my netflix watch, but I'm having issues playing a show via iTunes, yes one alone. I can play all the others. What does that mean?

  Thank you!!

  See if a reboot of your Apple TV helps.

  Go to settings > general > restart.

• I have Security Essentials but MSN warned me: there is no active antispyware. Can someone explain?

  Security Essentials is on, but when I try to connect to the internet with MSN, my ISP, appears a warnining on no antispyware and I have to click "continue numbering".

  More info: I use a computer with Windows XP Edition emachines family and 512 MB of RAM.

  Take a look at this article

  http://thetechjournal.com/electronics/computer/security-computer-electronics/anti-virus-compatibility-with-Windows-7.XHTML

• dc7800mt: dc7800 10 Windows 64 b PCI Simple Communications and PCI Serial Port drivers missing

  Can't seem to find the drivers for a dc7800 upgraded to Windows 10 64 b for PCI Simple Communications Controller and PCI Serial Port devices.  Any help would be greatly appreciated.  Paul_Tikkanen, are you still there?

  Hello:

  Yes, I'm still here, and Yes, I know what drivers you need...

  You need this for the PCI of Simple Communications controller:

  This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46137.exe

  PCI serial port:

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46134.exe

  And let me give you a bonus tip... Install the audio driver Soundmax ADI W7.

  I found that works much better than W10 installed.

  You install it, then select multistreaming in adi Control Panel, restart again and go to manage audio devices in the Control Panel, and then select the PC speakers, but of course install the W7 audio driver is optional, and it is up to you...

• UDP communication via secondary ethernet port on the cRIO-9074 problem.

  Hi guys.

  I connected my host pc running LV 2010 my cRIO-9074 port using a main ethernet crossover cable. I want to use the second port ethernet on the cRIO-9074 to read UDP messages, and I want to access these messages on my host. UDP messages are sent from a local network, but for testing I also use a second pc running LV 2010 to send UDP messages.

  I configured the ethernet on the cRIO-9074 ports according to this tutorial: "knowledge base 4E0DGASK: Configure the Ports of double Ethernet on real-time controllers'." " My host and primary ethernet port belong to 'Subnet A' while the second port and the second computer, sending UDP messages belong to 'Subnet B' (at the end of my post I will list the masks of ip addresses and the subnet).

  For simplicity, I used the VI´s of this example as a basis for UDP communication. The "UDPServerOnRemoteTarget.vi", which broadcast messages UDP, will run on the secondary computer. The "UDPClientOnRemoteTarget.vi", which reads messages UDP, will work on my host pc.

  Now, in the 'UDPServerOnRemoteTarget' VI, you must specify two IP addresses (port # remained unchanged at 3363):

  1: the IP address of the ethernet port that will be broadcast UDP messages.

  2: the IP address of the ethernet port that will receive the messages.

  In the #1 case I put the IP address to the IP address of the ethernet on the secondary pc port.

  At the #2 I tried to set the intellectual property: a) IP address of the secondary ethernet port on the cRIO, b) IP address of the ethernet on my host computer port and c) IP address of the primary ethernet port on the cRIO.

  None of the parameters produced results. I also tried to change the port number, which did not help.

  However, if I bypass the cRIO and connect the host pc and the secondary computer directly (by using a cable crossed a regular cat5 ethernet cable), I am able to send and receive UDP messages (the two stand-alone always are on different subnets). I guess that this at least excludes any fault in the VI´s code.

  Does anyone know what I'm doing wrong here? Is it possible at all to read the UDP messages that are sent to the secondary ethernet port on the cRIO my host pc?

  I have searched the entire site OR and forums, but didn't come through all that solved my problem. Most of the other tutorials configuration resembling my case is to import the device sends UDP messages in the project, but which is clearly not possible in my case, or is it?

  My IP settings are:

  cRIO 9074:

  Primary ethernet port: 169.254.62.215

  Secondary ethernet port: 192.168.0.102 (static)

  Host PC: 169.254.58.4

  Secondary PC: 192.168.0.144 (static)

  SubnetMask on all ports are the value 255.255.0.0

  I hope someone out there can help me out.

  Kind regards

  Phat

  Solved.

  Stupid mistake. I was running the VI on the host instead of the cRIO pc, which explains why direct communication between the computers worked. Everything works well when it is compiled for the cRIO.

  Kind regards

  Phat

• The computer hangs during the communication via a serial port

  I developed a code in LabVIEW 2011 to connect with the XY stage. It's actually two steps mounted perpendicularly. The installer of the system is that a (made by the same manufacturer as the stadium) gamepad is connected to the USB port on the computer if a USB to Serial converter. A step is daisy chanied to the controller and the other stage Garland at the first stage.

  To our application had to continually check the status and position of the steps X and Y. Because the joystick also returns responses when a request is sent to all devices, I need to send applications individually; for example. one request per order per device, making it a total of 4 orders. It takes care of the error returned by the controller. The problem, however, is that after a while the freezing of the program or the computer stops and restarts. It is located about 13 minutes (on average) after the start of the program. It also happens even when no command is sent to the devices. I put 50 ms delay before each send two commands (position and status) by device. Basically, the application waits for 50ms before sending two commands for X stage and the receipt of the response and when everything is done with X stage, he expects another 50 ms to do the same for step Y. Should this procedure goes on until the application is stopped. But as I said, there is a problem. Now, I guess the problem is that serial port buffer overflows. He chose to increase the delay time, but if it works to solve the problem, then I have no choice!

  I would appreciate any thoughts and comments!

  After a lot of time to experiment, I am convinced that the issue was with adapter Profilic.

• Is there a script to make changes specific attrubute to all layers in the project?

  Hello and thanks for your time!

  I have a project that contains a large number of compositions with many layers of shape of each.

  Is there a way to make global changes to property size STROKE of shape layers, for example 0px 1px?

  Thank you.

  This should work for you. Down is the line of code that you can set the value of the width. It will look like this a.property (i) .setValue (1.0); //STROKE WIDTH VALUE

  BEGINNING

  var app.project = proj;

  var comps = getAllProjectComps (proj);

  for (var i = 0; i)

  searchLayersAndChangeVal (comps [i]);

  }

  function getAllProjectComps (sourceFolder) {}

  try {}

  var itemAry, itemsInFolder, itemsInFolderLength;

  itemAry = new Array();

  itemsInFolder = sourceFolder.items;

  itemsInFolderLength = itemsInFolder.length;

  for (var i = 1; i)<=itemsInFolderLength;>

  If (itemsInFolder [i] instanceof CompItem) {}

  itemAry [itemAry.length] = itemsInFolder [i];

  }

  }

  Return itemAry;

  } catch (err) {alert ("error at line #" + err.line.toString () + "\r" + err.toString ()) ;}}

  }

  function searchLayersAndChangeVal (compSource) {}

  var layerCollect = compSource.layers;

  var layerCollectLength = layerCollect.length;

  var curLayer, accessories, propsLength;

  var propObjAry = new Array();

  for (var l = 1; l)<=layerCollectLength;>

  curLayer = layerCollect [l];

  If (curLayer instanceof ShapeLayer) {}

  getStrokeWidthAndChangeValue (curLayer);

  }

  }

  }

  function getStrokeWidthAndChangeValue (a) {}

  try {}

  var propLength = a.numProperties;

  for (var i = 1; i)<=propLength;>

  If (a.property (i) .matchName == "ADBE vector Stroke Width") {}

  a.Property (i). SetValue (1.0);          VALUE OF LINE WIDTH

  }

  If (a.property (i) .numProperties > 0) {}

  getStrokeWidthAndChangeValue (a.property (i));

  }

  }

  } catch (err) {alert (err.line.toString () + "\r" + err.toString ()) ;}}

  }

  END