Logon loop

Similar Questions

• Logon Windows XP Home Edition stuck in the loop - welcome to desktop without icons flash then disconnects from return to the Welcome screen

  @dallasdien: Judging by you in other threads (for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/9ec0baff-5d84-4daf-8766-867bc77e34fd), your computer is still infected. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  PA Bear: It worked fine after analysis and cleaning, including the reboot until the download of updates on 11 September, which seems to be where a lot of other acquired problems. I don't think that it is still infected as each scan was clear.

• Aspire 5943g could not start due to failure of the interactive logon process

  When starting my Aspire lap top the message "interactive logon process initialization has failed. For more details, please see the event log"However when 'OK' message, it just returns after 15 seconds so am in a loop of default. When trying to reboot in "safe" mode it shows the same message. I tried pressing the Alt and F10 keys together on first but nothing happens before the message appears. Is there a solution to this failure?

  Press DELETE to enter BIOS start, check whether the HARD drive on SATA devices, then check if the D2D option is enabled, then press F10, save and exit.

  at the next startup, press ALT + F10 and check if Acer erecovery begins.

• Cannot logon - if I try to login, it keeps disconnecting themselves.

  After my computer starts to the logon screen, but I can't log on to the office. If I try to login, it keeps disconnecting. I tried to start in safe mode, but it was still disconnecting when I try to disconnect it. Please help it is urgent

  The "loop of logon / logoff" is usually caused by malicious software.
  See if any of these items will help you:

  «How to fix the log / close the loop in Windows XP»
    <>http://www.ehow.com/how_4527843_onlog-off-loop-Windows-XP.html >

  The following article uses the resolution of this problem as an example for editing the registry using Bart PE:

  "How to edit the registry offline using BartPE boot CD"
    <>http://WindowsXP.MVPs.org/peboot.htm >

  HTH,
  JW

• loop.exe Prevx identified as a threat

  loop.exe Prevx identified as a threat. How can I remove by other means, as I read that you should never pay for av or malicious deletion.

  Hello

  You should already have an Antivirus installed.

  There is good, available for free.

  And never install ONE Antivirus like more than one can cause system outages:

  Avast: http://www.avast.com/free-antivirus-download#tab4

  Microsoft Security Essentials: http://www.microsoft.com/en-us/download/details.aspx?id=5201

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Put in drive problem - maintains just a loop to the advanced startup options

  My laptop with windows vista, keeping just a loop to advanced startup options and I can't get past this point, I can't reach the windows login page

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• VISTA update package puts me in an infinite loop

  I went through your latest VISTA OS update package this morning. When the system is restarted, he was caught in what appeared to be a loop at the end of phase 2.   After an hour of waiting for step 3 start, I became so frustrated that I turned off the laptop and then on - and went through the scan for likely to restore my computer to where it was before your update so-called manually. Everyone knows about this problem?

  Hello

  This is not microsoft

  These are public forums, facilitated by microsoft

  If that happens it's a way out ot of the loop

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  but for Windows Update issues:

  Please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Lenova T400, Vista, stuck in a loop

  Lenova T400, Vista operating system, it started when I was doing preventive maintenance R & R.  Stuck in a loop with return to the screen: "Configuring updates: stage 3 3-0%", then after a few minutes, it will restart then finally back to 3 of 3 screen. I could open in safe mode, but not now.  If I can get normal start, I was able to install Windows 7 or troubleshoot.  Question: 1 How can I do this and 2. belongs to the view of Windows operating system, the system Lenova GOLD? Thanks JR

  Hello

  the upgrade is not always a good way to correct errors

  you often take them with the upgrade or errors interfere with the upgrade

  and Yes, it must be in normal mode to upgrade

  Updates configuration is normally a process of updating microsoft windows

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• 11/11/15 Windows 7 Professional Patch forces Lenovo X 220 in endless loop

  This morning (11/11/15), I woke up my laptop Lenovo X 220 running Windows 7 Professional 64-bit and I saw a patch update had been installed during the night.

  I clicked on my profile deleted icon screen and return to the logon icon screen. There are three profiles to choose:, admin my wife and me. No work. I click on any one of them and it is just the same screen. Will not progress to the desktop. Seems to be a reboot loop.

  I restarted many many times. I removed the battery. I held each F key trying to access advanced configuration. F1 on my machine gets me into BIOS. I clicked on system start 'Quick' to "Analysis" but that just took more time from the BIOS before arriving at the display of the icon.

  Any F key I have (other than F1) the system continues to boot to windows but always stop at the connection of the screen with icons for profile and then won't let me go any further. Lenovo has the little blue button that is supposed to fix the computer. Now that button gets me only beep, then he continues the startup of the connection profile screen. No matter what, I can't do anything to start the machine.

  I ran the machine in now the power button. That came back with "Windows was not end normally.» You want to start in safe MODE, safe MODE with networking or command window in safe MODE? "The screen did NOT offer the option to"REPAIR COMPUTER"to go to a previous installation point. The three modes always bring me the same profile screen. Clicking on one of the icons just rest in the reboot loop.

  No matter what I do, it just restarts.

  What did Microsoft for my OS Win 7 Pro? It has worked wonderfully for years. Now Microsoft has bricked my laptop. It's really annoying.

  One thing is for sure. I turn off "Automatic updates" from here out - if I ever start my machine again. It is clear that I can't trust Microsoft even to "solve" a problem in their own operating system.

  UPDATE: I just remembered that I had a Windows Phone plugged into the USB port to charge the phone when the update occurred. A STINKING PHONE WINDOWS! Not an Apple, not an Android. A WINDOWS PHONE that made my work on me. (It stinks by the way.) I'm afraid that this stupid piece of junk may have messed up the installation of update.

  In any case, tonight I tried to recover the laptop. I made a Win7 64-bit to get CDs from another Win7 machine and tried to do a system restore, but of course, there is no point of system restore on the computer. Did not one, conveniently. Tried every service offered by the Sys restore CD without result.

  The Lenovo X 220 had a partition on the C drive for the restoration of an original installation, that is going to lose all my programs, of course, but I can not even the reader to do the installation.

  Something really watered this X 220 Tablet.

  If Microsoft thinks I'll never trust their laptops after they have destroyed one of mine, think again. So disappointed with Microsoft, Bill Gates with his billions.

  Hi Daniel,.

  Thanks for posting your query in Microsoft Community.

  Do you remember the number of the update?

  I understand that you are facing problems of connection in your Windows 7 system. Some members of the community reported that they are facing similar problems after installing the recent update KB3097877 for Windows 7. In order to solve the problem, I suggest you try the steps posted by Akil P replied on 13 November 2015 in the following thread and check if the steps help you to solve the problem.

  Screen flickering and problems log on Windows 7 after installation of updates

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/flickering-screen-and-sign-in-problems-on-Windows/df9c8255-587f-4DBF-BB45-6639b29dc4ae?TM=1447375680761

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• No response from the keyboard and mouse to the Windows logon.

  Hello, I had this problem a while but a restore fixed it, and of course it happened recently that I want to challenge results.
  Basically, my mouse and my keyboard do not respond before Windows logon.
  Opening height of session does not either.
  The keyboard and mouse seem to work if I go into the conservation program (ESC key at startup and F11).

  I'm running Windows 7 on an HPG60 laptop 64-bit with 3 GB of RAM.
  Processor: Intel (r) Celeron (r) CPU
  900 to 2.20 GHz 2.19 Ghz

  My mouse is actually a touchpad - Synaptics PS/2 Port TouchPad.
  My keyboard is attached to laptop Standard 101/102 - key or Microsoft Natural Keyboard PS/2 with HP QLB.
      
  I need help as SOON as possible so that I can get back to work.

  -Albert

  This is equivalent to the old rule of iron of computing: If you have important files on your PC, then you need to back up an external medium regularly. Problem request not do or wait until you have a major problem. Fortunately, Windows 7 gives you a loop hole. Here's how it works:
  1. get a disk external 2.5 "in a USB case.
  2. connect it to the PC.
  3. set your BIOS so that it uses the DVD drive as its primary boot device.
  4. start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
  5. press a button if you are prompted to start from the DVD.
  6. When prompted, select "Safe Mode Command Prompt".
  7. connect as administrator if you are prompted.
  8. Select repair when prompted.
  9. Select command prompt.
  10. save your files or folders on the external USB drive (or a flash drive).
  If you are not familiar with the commands of copy in the command line environment, ask a friend gifted in computer science to help you.

  After solving the problem of keyboard and mouse, do you a favor and use the USB disk as backup media. On a regular basis.

• Logon trigger does not not on DB-Link?

  Hi all

  I have a serious question on the table access via a database link.

  I have three schemas:

  DATA@SOURCE

  INTERFACE@SOURCE

  WORK@TARGET

  DATA schema has a table called T1

  The scheme of the INTERFACE has select privileges on all the DATA tables. In addition, INTERFACE schema has a logon trigger change the "current schema" data:

  CREATE OR REPLACE TRIGGER TRG_A_LOGIN_SET_SCHEMA AFTER LOGON
  ON INTERFACE.SCHEMA
  BEGIN
  execute immediate 'ALTER SESSION SET CURRENT_SCHEMA = DATA';
  END;
  

  The scheme of WORK has a link database to the schema of the INTERFACE called INT_DB_LINK.

  I am now logged in the scheme of WORK on the TARGET database and I will execute following statement:

  select a from T1@INT_DB_LINK
  

  -> it works

  Then I run

  declare
    cursor c is  
    select a
      from T1@INT_DB_LINK
     where rownum<2;
  begin
    for r in c loop
      null;
    end loop;
  end; 
  

  It does not work. Error message is ORA-000942: table or view does not exist.

  But why?

  Can someone help me?

  Thanks in advance

  Py

  Hi all

  After a long, very long search I found what caused this strange behavior.

  The error ORA - was not triggered by the SQL execution engine, but by the SQL-parser/SQL-Validation.

  The second statement is that an anonymous block of SQL Oracle parser checks all the dependencies of objects before execution.

  This means that a connection is established to the TARGET to SOURCE checking if table T1 is available. The strange thing is

  that, in this respect the "ALTER SESSION" trigger is not fired. If the Analyzer does not find the object T1 in schema INTERFACE.

  If I create an empty table T1 in INTERFACE the anonymous block gets analysis/validated and the statement is executed. But this

  time the block made a normal life 'connect session' and the trigger is triggered. This means that statements access table T1

  DATA schema. (But T1 in the INTERFACE should be existing this analysis/validation works)

  I don't know if it's a bug or a feature.

  To work around this I created private synonyms in the diagram pointing to DATA objects INTERFACE.

  Thanks for your help!

  Py

  ------

  regarding the other question:

  Yes, the permissions are granted on a role.

• iMac 2012 - sierra installation failed, caught in the loop, please help

  Hey everybody.

  That's what I have:

  iMac 27 "mid-2011. He had on El Capitan.

  This iMac contains two hard drives and drive superdrive.

  A disc is 256 GB SSD and the other a regular 2 TB internal HARD drive.

  As SSD is faster that I keep my OS X and programs on this SSD drive, all the other stuff like photos, music, documents, are put on the classic 2 TB HDD.

  This is what happened:

  Attempt of I:

  Everything was going well until the installer has discovered that the SSD did not have a sufficient space to install. I quit the installer, the option pop up, I called "Startup Volume" has chosen my SSD and restarted it. Has been 2 attempts, if I'm not wrong, but worked. I killed and moved the files, I think now would be enough disk space on my SSD tried the Sierra ad install again.

  --> Attempt II:

  This time Sierra Installer arrived at the stage language choose where he welcomed and asked to choose the language. The next screen it tells me once again: not enough space, the bigger internal drive offers enough, but I don't want that. So, I tried the same exit to leave the program and launch then boot Volume installation...

  ... that in trouble:

  My SSD drive now no longer appears in this window of the boot Volume.

  When you try to access the boot Volume it will skip in the app language choose, sometimes shows this window choice animation multilingual, sometimes simply stays gray but will show when moving the mouse upwards arrow to the top of the screen, choose language drops in when I try to open the boot Volume after leaving the installation program. In addition, the language choice (can not be exited by cmd Q is said by the way) seems to open before the boot app Volume and the boot volume app does not appear my drive more-> Catastropheeeeee!

  Also option to restart regular off the menu above will not help. After about half to the top of the boot of the SIERRA Installer keeps new hindsight. No chance to reboot to my previous El Capitan based OSX. I am bound to this loop.

  Is turned off, wait and switch back to does not help, even in a loop.

  Then I tried also open disk utility, I also have an external time machine backup drive connected. Tried this way to restore my SSD of time machine, which fails on every attempt.

  I'm totally caught up.

  Help, please!

  just in case.

  I did the job.

  Launched my iMac in disc mode on my mac pro book. A few items to the disc hard iMac deleted, then restarted, macos sierra resumed and concluded correctly, in other words: all and working again!

  Even a message to Apple to look bad when insufficient disk space is detected, see my first post, thanks.

  Best regards

  Max

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.

• SWIFT playgrounds, how to Code 2, build a loop, I can not find isOnGem

  Swift playgrounds, how to Code 2, build a loop, I can not all isOnGem. What Miss me? If I am not mistaken, is it a bug? How should I declare?

  I can't figure out how to solve the puzzle without this.

  isOnGem is not available as an option in the box to scroll so just type in from the table instead. If you enter exactly the same case, it will be recognized as legal code when you run your program.

• Note looping in GarageBand

  In GarageBand, I did a recording of me just sing a long note and want to loop an entire song so the note sounds even longer.  But when I do that, whenever the loop again it makes a little noise, hard to explain, but even if I cut the beginning and the end of the recording, he does always a little sound whenever he performs a loop itself and I don't know what to do. Y at - it a setting I can change to stop? I want it to look like a long drone.

  To what you want to achieve, you must to crossfade regions to create transitions smoothly between them. Unfortunately, GarageBand doesn't have the ability to fade or crossafe Audio regions (Logic Pro X). However, all is not lost, there is a solution, you can do the same thing with automation.

  Look at the screenshot to understand the procedure.

  • Create two Audio tracks
  • The first Audio track has the area of your voice recording audio
  • Apply the Volume Automation to increase the level at the beginning of the region and lower end of the region.
  • Now copy (Option-do drag) this region in the second piece so the end of the first area overlaps the beginning of this region. Automation is copied with the region.
  • Now select the region on the first track and the area (you just copied) on the second track and the Option-do drag to the right to copy both of them, yet once for the region of second and third overlap.
  • Keep this copy procedure as long as you need it to be.

  As you can see, when a region Faints, the other region on the road to spare fades, create a crossfade without welding.

  

  You play a little to find the right length for automation to come in and out and also how to straddle the regions.

  I explain details of the automation and the rest of my book of GarageBand. ""X GarageBand - how it works".

  A tip:

  Instead of having a linear Automation curve between two Automation Control Points (the points), you can create logarithmic shapes by Ctrl + Shift + drag the line between two Control Points. Drag left/right for s-shape or high-low exponential curves. It will look something like this (sh + ctr + click on the line to linear curve).

  

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."