Similar Questions

• the resume session logon screen does not appear

  This happened after I installed windows essentials. Less, it's the only thing that has changed on my computer.

  Since then, my screensaver snaps but the logon screen does not light when I touch the mouse or keyboard. Everything is there for anyone to see.

  Help, please.

  I wonder if the screensaver is actually attractive.

  You use a screen saver image rather than a screen empty?  If this isn't the case, could you then temporarily for testing purposes.

  Go to control panel, Options power, active {power plan} change plan settings, turn off the screen and then set this for an hour or more, then you can be sure that it is not getting involved in this problem.

  Try this: -.

  1 if the screen saver is really attractive, but the connection does not work then it means that at least one aspect of the power options is not safeguarded by the system.  Are the other settings in power options, plan {power} active settings change, change of plan avancΘs, [you will have to click on "view the currently hidden settings] all be registered that you put them? Also, make sure that all these 3 parameters [above] still have their settings correctly.  You must be bored watching the. If the settings you equip & registered do not correctly appear in the advanced power management when you watch them again later to see this MS fix

  When you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel

  2. If the screen saver is not actually engage then go on Panel configuration, device, Manager display - check for error messages then make a right click & Update drivers or go to the manufacturer of PC / display card manufacturer & install their last update.

  Beyond that, I can't think more away from the useful suggestions.  You've probably already tried SFC & found that he picked up nothing.

• Logon screen does not appear for public wifi

  I recently bought two Macs (Macbook Pro and Macbook Air).

  When I connect to wifi, which requires a logon, the Macbook Pro works fine. The Macbook Air does not work. It connects to the network, but when you open a browser, it says that you are not connected to internet (which is true, as did no logon).

  Forums offers various ways to approach this (try to force the login screen by entering the URL, look at the DNS settings, enter http://192.168.1.1 etc etc) but none of these work.

  I am lucky to have two Macs and I watched the network settings, Notification etc settings and they are (essentially) - things the same as the Mac address are obviously different.

  Two Macs are OS X El Captain (Version 10.11.4).

  Can anyone help as the Macbook Air is not very useful if I can't access public wifi?

  And if anyone has the definitive answer, I think it would help a lot of people.

  Thank you very much.

  How are you connected to the router? What's an auto assigned DNS or that you must do it manually.  If it's self assigned, remove the wifi settings in the preferences system, network. Network / airport / advanced, under the airport click Network in the box, then the negative pole. Then close and open the airport icon in the top menu. Make sure that the airport is on. Click on join the network, and then follow the instructions.  you will be asked for the name of the network and security. then your network password.  Do of course, don't forget that this network is enabled. You are basically removing the network in system preferences and starting over.

• Define a user account already but every time I start my computer the Welcome / logon screen does not appear.

  Original title: user account number.

  I've set up a user account already but every time I start my computer the home / log on screen does not appear

  Hi willy79,

  How many accounts do you have?

  You can check if the Welcome screen is enabled in your computer.

  For more information, refer to this link: to turn the Welcome screen on or off

  Hope the helps of information.
  Please post back and we do know.

• Windows XP logon screen does not appear

  Laptop of my colleague was recently hit by the tdss rootkit malware.  I think I could clean out of his system.  When trying to load the computer out of safe mode, the Windows XP splash screen appears, he will then travel to the blue screen (BSOD no), the pointer of the mouse will appear, but the login screen won't come.  How can I get this problem so that the computer can be used again without having to do a low-level format?

  I've used the Windows Recovery Console to extract a new copy of the kernel32.dll file, but the problem remains.

  Hey

  I wish your problem which was simple. return to safe mode and go to control panel, administrative tools, Event Viewer on and click on system. Now you should be able to see all kinds of errors publish and republish when replying again so that can see your problem.

  It sounds like your windows for some reason any download some drivers painful, which is why the long delay for your account download. You may also check your registry too. I wouldn't you recommended changes before saving your date and knowing your way around.

  On the command prompt type: housing (MRT.exe) If you missed to clean malware, let him scan window clean from any virus remains. Parderogationauxarticles how to clean tdss rootkit and with what?

  When windows has finished the Scan, Type Run: (msconfig.exe), the utility configuration system to select diagnostic startup or selective startup which means choose what system services or start to download when windows restarts starts. I recommend for you to disable all non-microsoft services and all the commissioning.

  Restart the computer, you should be able to access normal account.

  It's not over I have difficulty but only first step setting... good luck.

  P.S if tool (MRT) does not work it means that your friend didn't update its windows xp.

  Life is easy, live and die what else?.

• HP Pavilion dv6-6150us. logon screen does not appear on the start upward.

  Hello

  The other day, I turned on my laptop and walked for 10-15 minutes. Then I went to find my cell phone had not started correctly and was rather come with a black screen displaying "check disk for errors. It could take more than an hour. "So I left it sitting there turned on and plugged in for about 5 hours, and the message remained on the screen. I tried to reinstall Windows 8 via disk and hard drive, and it could not be loaded. I also tried hard reset my laptop, whereby the same message appeared after I switched back on it. Could someone please help me with my laptop, fixing as I need to be fixed as soon as POSSIBLE?

  Thank you.

  Hi again Jarrod12345,

  You are welcome!

  If this answer solved your problem, can you please mark it as an accepted solution? This will help others with the same question to find the answer they're looking for.

  Have a great rest of your day!

• Pavilion15-p018nz: Windows logon screen does not display the symbol of 'the eye' to reveal a password and the right arrow (input)

  Which connection to Windows 8.1 the eye symbol and the symbol of the arrow to the right were posted up to that (I think so) after an automatic update of Windows. As I was intending to migrate to Windows 10 I na not invest a lot of research on this problem. Now, after the migration successful Windows 10 Home the problem still exists. After typing the password I can't check it out because the eye symbol is still missing and I have to press 'Enter' because of the clickable right arrow missing for the opening. All this happens with a Microsoft online account. I created an account local and with that, the symbol of the eye, but not the right arrow reappeared. Thanks a lot for help.

  Hi there @CKURT

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you want to activate the icon reveal password for your system. I'm happy to help you.

  It depends really on what version of the operating system you are running, because this kind of thing is normally controlled by using the Group Policy Editor. This tool is not a part of a home edition, you need the Pro version or later version for that.

  Assuming that you do not have a pro edition or higher, then it can be a help to you:

  5 ways to access Local Group Policy Editor on Windows 10 - isunshare.com

  Disable or enable the new feature button to reveal a password in Windows 8 - windowsclub.com

  Unfortunately, the version of Windows 10 I installed next to me is that the home edition as well, so I can't access to this, to check, so let me know if it works for you.

• Logon screen does not appear on HDTV

  I can't start my desktop under Windows Vista Home Premium computer when it is hooked up to my new Vizio 19 inch HDTV.  It is connected to the TV with a VGA RGB cable port.  I see a few screens to come, then it goes dead to the point where I have to enter my password (the screen says something to the effect of no signal detected, ready to turn off, then the TV powers off.)

  I tried another cable with the same results.  Note, I can't connect my netbook (running Windows XP) to the TV and I get the appropriate login screen.

  Is this something special for Vista which would be fixed with an upgrade to Windows 7?  Or are there other patches available for this problem?

  Thank you very much in advance for any help you might be able to give!

  Mr. horse

  Hi Sir horse,

  1. are you able to see the HDTV screens after you connect to your laptop?

  2. don't you update the driver for the TV tuner card?

  You should not upgrade to windows 7 to get this issue resolved.  If it is a problem of signal I suggest you to update the drivers for the TV tuner card and check if it solves the problem.

  Before you can watch and record TV in Windows Media Center for the first time, you will need to physically connect a TV signal to the TV tuner on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I shut down my computer and turn it back on, my logon screen does not appear.

  When I close my computer to move around the campus, he goes to hibernation, which I expect it to do. Unfortunately, when I opened this back to the top, most often (by that I mean always) the login screen refuses to appear. the only solution I've found yet is to shut down my computer, turn it on, and then go to the logiin screen. at this point he invites me to "Please wait", where, how it makes the little thing spinny points. It goes back to the beautiful image of a tower, and when I hit a button to return to the login screen, the "Please wait" is present. affter ten minutes of this unforgiving cycle, it ends by allows me to connect. but id prefer to not turn off my computer and then go directly to the login screen.

  im running windows 8

  Check connection options > to the 'start' screen type in "sign-in"options > select 'Sign-in option' > so 'password policy' says select "password is not necessary when waking up this PC to sleep" change "Password required when waking from sleep"

• When I log into Windows, the login screen does not appear, how can I fix?

  I am running Windows XP Professional.  When I start my computer, it works fine.  I can log on and have no problem.  Unfortunately, when I log into my profile, Windows logon screen does not appear.  I use the log on screen where you have to manually type your user name and password.  The HP wallpaper happens, but the log in box does not work.  Better yet, it is not always the case.  I logged on and outside several times without any problems to come back later and find the log in box missing.  The only way I can solve the problem is to manually shut down the computer using the power button then restarting him.  I have no idea why this is happening or how I can fix this problem.  Any ideas?

  Hello

  I suggest you try the steps in the following Microsoft KB article and check if it helps.

  How to turn on automatic logon in Windows XP

  http://support.Microsoft.com/kb/315231

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• Computer hp laptop 15 will not pass the logon screen

  I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?

  Hi @samlobos,

  Thank you for joining the HP Forums!

  I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!

  Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• I have a hp pavilion dv9205us laptop - Alt print screen does not work

  I have a hp pavilion dv9205us laptop - Alt Print screen (single screen) does not work - operating sys is Vista but XP Professional is my Microsoft application - I can Alt scree printing when I have a keyboard plugged in. - but without the HP laptop has only Prt sc (which is the option further down on the personal key) - without the remote keyboard how can you alt info impression of individual office to another doc. ???

  Thank you very much - it worked, and then just to screen individual, you want to without the entire background behind it - Alt / button FN and Prt Sc then allows me to get that. Once again thank you.

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• my iphone 5 s screen does not work.

  my iphone 5 s screen does not work. Touch is responsive but display sows a lines vertical coloring...

  TNX for help

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to have your iPhone verified and, if recommended by Apple, served (either under warranty or through paid repairs):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status:

  • https://checkcoverage.Apple.com/

• Replaced the cable. Now, the screen does not work. What could be?

  The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

  My setup

  [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

  with a key USB drive and Ethernet connected to the back of the Thunderbolt display

  Already tried this

  • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
  • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
  • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
  • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
  • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
  • Restarted my laptop. No change.
  • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
  • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
  • Using the newly purchased cable as a Thunderbolt external cable works fine too.

  Question

  Does anyone have suggestions on what to try next?

  The logic card goes into a sort of locked mode when you replace the cable?

  Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

  Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?

  
  

  Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

  Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

  The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

  Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!