Logos that are still using 6001 in Windows 7 64
We seem to still have a case in a 64-bit windows system 7 where the installation OR use ports 6001 and 6002 (which are required by Safenet). The update of the register:
HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\Logos\Ports\FirstClientPort = 5000
HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\Logos\Ports\FirstServerPort = 6010
has already been tried and did not help. The entire program has been uninstalled and reloaded. This did not help. Is there something special about a 64-bit system? Other suggestions to release 6001 and 6002
Dig a little deeper, I found the entry in the
\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\Logos\Ports
I added the FirstServerPort REG_DWORD
It worked
Tags: NI Hardware
Similar Questions
-
What will happen to the computers that are still using Windows XP?
Original title: Windows XP?
So, what will happen to the computers that are still using windows xp? Say, my computer is too old to support something newer than XP
On April 8, 2014, support and updates for Windows XP will be more available. Don't let not your PC not protected.
http://Windows.Microsoft.com/en-AU/Windows/end-support-helpYou need to consider your options carefully. You can always run XP but be aware of the risks. It is always your decision what you decide to do.
Cyber-threats for Windows XP and advice to small businesses and individual consumers
-
I downloaded the iso file of windows 7 Home premium 64-bit. can I use the product key to my Home Premium pre installed windows 7 64-bit OS that are in my label of windows laptop back...
Original title: the Windows 7 product key
Yes you can. To learn more:
If your computer is pre-installed with Windows 7 Home Premium, you should have a recovery if partition:
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
This is how the recovery partition is accessible to most popular brands...
For Dell, press CTRL + F11 directly after switching on the device
For HP, press F11 directly after switching on the device
For LG, press F11 directly after switching on the device
For Toshiba, press and hold "0" BEFORE and during the power upward
For Acer, press and hold ALT + F10, as soon as you see the logo
For Asus, press F9, as soon as you see the Asus logo.
For Samsung, press F4 to the power upward...
For Fujitsu, press the F8 key directly after the power
Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".
------------------------
If the recovery partition is damaged or does not, you can then use the downloaded Home Premium as an alternative.
-
I receive photos that are on the side and Windows Photo Viewer won't let me turn, as it said that the file might be in use or open in another program or the file or the folder may be read-only how can I change so that it can rotate? This happens mostly with photos sent from the iPhone.
original title: not able to rotate the photoYou are welcome and thank you for the comments.
-
How to make the color of ScrollBar that are created using the css code is displayed in Windows 8
I wish I could understand how to get the color of ScrollBar that are created using the css code appears on my web design theme games. But I can't see them in Windows 8. Is there something that I need to enable to see colorful scroll bars? I'm used to be able to see them on my Windows XP computer. It is important for me because a lot of people like models with colorful scroll bars.
Open the Tools menu and turn on "Compatibility view" to do. Note that this works only in the desktop version of Microsoft Internet Explorer.
-
Original title: problems of Windows Vista CD
Windows Vista Home premium. You want to burn on a CD - RW disc image files. Inserted the disc in the drive and got the message "Windows is unable to read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes. If the drive is not formatted, you must format it before you use it. "I can't get a dialog to come so that I could format. Not had this problem with a disc previous out of the box Memorex even.
My problem has been resolved by the www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-windows-vista/ procedure. The first element - material Detection service kernel - managed.
-
After a system crash, restore, all my contacts are still in the main window of Windows mail Contacts, but now when I create a new message and click on 'To', all contacts have disappeared from my list of contacts. How to make their return in the list without having to re-enter them one by one which would take forever? I am running Vista Home Premium.
Thank you.
DCHello
Try the following article, it can be applied as happened after the restoration:
http://support.Microsoft.com/kb/934563
You can also export and re - import their contacts. See the link below to do so.
http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts
-
Original title - Windows cannot read blank disc
When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you have a problem with the disc.
As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.
I suggest you run the Fix-it tool and check if it helps.
This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.
See the link below.
https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.
Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.
-
Cache question? My Cache in Bridge is full, how do I do that the purge? Will I lose anything as my thumbnail or photo files that are still on my computer?
Hello
You can purge the cache of the following option
Preferences-> Cache-> purge all the Cache now
You will not loose original photos to the computer. It will remove created bridge Cache of thumbnails / images.
You can also set no.. a value of days to automatically purge older option preferences-> Cache cache.
Please let me know if you have any additional questions.
Kind regards
Anil
Adobe Bridge team
-
A way to show items that are not used in the sequence
Hello world
is there a way to display items that are not used in the sequence.
in order not to forget the "rushes" in the Assembly?
my best,
Turn on the use Audio and video columns in the sandbox and then sort by those.
-
y at - it a button to remove all the nuances that are not used in an file?
Hey all,.
I was wondering is there a button that removes all the nuances that are not used in an illustrator file?
Any help would be great
Look in the Actions Panel. It should be an action he who says to remove all unused items in the Panel.
-
queue on the profile that are not used
Hi guys,.
is anyway to wrap on the profile that are not used or attributed to any user name or roles?flaskvacuum wrote:
Hi guys,.is anyway to wrap on the profile that are not used or attributed to any user name or roles?
SQL> CREATE PROFILE test LIMIT 2 FAILED_LOGIN_ATTEMPTS 5 3 PASSWORD_LIFE_TIME 60 4 PASSWORD_REUSE_TIME 60 5 PASSWORD_REUSE_MAX 5 6 PASSWORD_VERIFY_FUNCTION null 7 PASSWORD_LOCK_TIME 1/24 8 PASSWORD_GRACE_TIME 10; Profile created. -- Created but not assigned -- SQL> select distinct profile from dba_profiles where profile not in (select profile from dba_users); PROFILE ------------------------------ TEST SQL>
-
Find indexes in the schema that are not used
Hello
Anyone know an easy way to SQL or EM to find all indexes that are not used (not accessed) in a schema?
Greetings
Published by: user552215 on January 26, 2012 04:15Salvation;
Please see:
Identify unused indexes [ID 144070.1]
Identify unused indexes with the ALTER INDEX TRACKING controls [ID 136642.1]Respect of
HELIOS -
can I install PES 11 on two laptops that are not used in the same place?
Can I install PES 11 on two laptops that are not used in the same place or at the same time?
Yes, your license entitles you to two simultaneous activations.
-
I bought a laptop Dell XPS with Windows 8 Professional pre-installed. I need to migrate things that are on my laptop Sony Vio - who has Windows XP Professional - for the new laptop. Transfer cable that Dell sold me for employment does NOT in Windows 8... Then, how should I proceed?
Use the Windows Easy Transfer tool included in Windows 8. You should be able to create a USB key that you can take your XP computer, collect files and settings and then bring them to the new computer. See here:
http://Windows.Microsoft.com/en-CA/Windows-8/transfer-files-settings-another-PC
Maybe you are looking for
-
Why screen going white for an update
During the two or three updates to ElCaptain once the Mac has rebooted the screen turns white for a while and then the apple logo appears and the update happens fairly well after that. However, during the white screen, it is unclear whether the compu
-
Module"C:\ProgramData\EbutwExegu.dat" failed to load the
"I won"module"C:\ProgramData\EbutwExegu.dat" failed to load "whenever I have to start, the system works normally after dimissing message I also can't uninstall Security Essentials completely - I was wondering if the two were connected
-
How can I configure my exe associations... None of my exe shortcuts work
When I click on any exe file I get a pop up to association set... dunno what happens... all antivirus scans are negative, defragmented and cked reg
-
Local network connection icon disappeared. Is it possible to add back?
Local network connection icon disappeared. Is it possible to add back?
-
When I RIP and synchronize music CDs using w.m.p to my mp3 player why some music files that are already in the reader get deleted? I do not ask or tell him to delete the music files that are there. He removes them automatically. It's very frustrating