HP Pavilion tx2510us hardware problems...

Similar Questions

• Pavilion dv2500 loading problems.

  I have a HP Pavilion dv2500 Notebook PC and I just bought a new battery about two weeks ago. My laptop is less than two years and it took me about six months to get a new battery for my laptop. In this period, I use my laptop on my power adapter only with no problem. Now that I have a new battery, I noticed that my laptop has problems of load. It will charge the battery but only if the ca is in a certain position and nothing 'bumps' in there. Six months ago, I took my laptop to my college to check the life expectancy of the AC and my college said it was perfectly fine. I did yet another health check, but I wonder what could cause this problem. The battery again, and this problem just started after I started using a battery on my laptop. I think that my AC is about a year, too.

  If I take the battery and the only laptop running on the AC, it won't work unless there again, it is in a certain position. And again, this battery is brand new and before she would charge perfectly fine. My power adapter could be dying or will I have another hardware problem? Because it's the only problem I've had.

  http://h10032.www1.HP.com/CTG/manual/c01295820.PDF

  If you have not tried with a different AC adapter, I'll try to see if I could borrow one and try that first.  If it still does the same thing, then I would say it is the seizure of power on the Board of Directors.  I don't know your whole model number but the link is for the service and maintenance manual for a 2500.  It will show the procedure to disassemble and fixing it.  Being to shake autour decision-making, I would say that it's a bad shot.  The link I posted in the previous post is for the usb card.  I just showed you that if you can see how the decision-making was there.  It just buy the plug with cable, and not to the usb Board.

• of HP Pavilion laptop webcam problem

  I have a hp Pavilion dx6665ca with Vista and all the service packs and updates of the firmware & bios.  In recent months, every time I have open or close the lid, I get a notification on the toolbar by saying: "unrecognized usb device".  It looks like this:

  http://imgur.com/0eOrQ.jpg

  It was annoying, but nothing seemed to be irrelevant.  I also have a problem where the left side of the screen will sometimes flicker and go almost black, then I thought it might have something to do with it, but it was intermittent.

  I recently tried to use the webcam and it was not detected by the software. After you have checked in Device Manager, I realized it wasn't showing up there under imaging devices, as it should:

  http://imgur.com/Z9j86.jpg

  I have the impression that the "unknown device" under the controllers USB is the camera, but Vista does not know what it is.

  I tried the new firmware, software, uninstall and reinstall all usb devices and drivers, nothing seems to work.  I always get the message "unrecognized usb device" if every time I open or close the lid.

  If the Device Manager it detects not after all these attempts, am I experiencing a hardware problem?  My warranty expired 2 months ago is there no matter what chance hp will fix this issue, I see so many posts and it seems to be a widespread hardware issue?

  Any contribution is appreciated.

  Thanks in advance.

  Message edited by Picklefeathers on 05/30/2009 10:21
  Message edited by Picklefeathers on 05/30/2009 10:24
  Message edited by Picklefeathers on 05/30/2009 10:25

  Hey guys, I saw some people posted again so I thought I would add a few things...

  Since my last post, I replaced my inverter display twice and my Webcam once. I think that following these two parties do not and one of them more than once, that we can logically deduce that there is a problem with the amount of energy supplied to these two devices.  They are powered by the same connector and I bet that these hardware components fail after that.  Even now, on my THIRD Board(original +2) Inverter it is still flickering. Short of replacing the machine, you can replace these components.

  You have two choices: pay to have someone else fix it or do it yourself.  If your idea of a screwdriver is a butterknife, pay someone else.  If you are confident, smart and willing to learn, you can do it yourself.  You could ruin your machine if you screw up, but I promise you that's not so difficult.  For model Pavilion dx6000, look on ebay for the following:

  Camera Module-part # 446486-001. A simple installation with the right tools. Do not break the legs that hold the bezel (frame) plastic around the screen or the lid does not close.

  Display the converter DC-AC-part # 431391-001. This one is a little harder to install, but you have to be patient and VERY CAREFUL NOT to BREAK THE TAPE.

  Here is the link for the manual.  The title is different by model number, but the procedure is the same, including the reference numbers:

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/c01178385/c01178385.PDF

  To replace the camera module, go to page 37.

  For Inverter Board replacement, go to page 39.

  I hope this helps.

• Pavilion dv6 charging problem

  My Pavilion dv6 will not start or run on sector. The battery may charge while the computer is turned off but not while it is running. Any suggestions?

  Hi Me53B,

  You're right, it could be a hardware problem. I wanted to try to eliminate the software side first because the laptop does not seem to make the connection when the computer is turned off. I've included both links below that will show you how to test the material for chess.

  Failure of Windows 8 material screening

  Detection of failures of hardware Windows 7

  Thank you

• HP pavilion tx2510us

  Any possibility of using verisoft / digital persona for hp pavilion tx2510us / tx2500us after a Windows 7 upgrade?

  I used Digital Persona with the original OS.

  Hello

  Greetings!  I tried to download the HP Support Assistant, as suggested.  It did download the software DigitalPersona Personal once more, but was unable to detect the fingerprint reader / player.  If this solution does NOT work.  

   

  Please update your information with the following link to download AuthenTec fingerprint reader driver to be used with the DigitalPersona Personal software that solved the problem for me.

   

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/DigitalPersona-AuthenTec-fingerprint-and-Windows-7/TD-p/218831

   

  Thanks and regads,

  Emilie

• HP pavilion g6 bluetooth problem

  Hello.

  I have hp pavilion 2211et g6

  I installed win 8.1. and installed all the drivers.

  But I can not activate bluetooth device. Wi - fi device does not work correctly.

  In the list of devices, a device is "unknown device". Perhaps this bluetooth device? When I using win 7, bluetooth was working.

  Help me please.

  Thank you.

  @okeks

  This unknown device is actually for the HP ProtectSmart hard drive Protection and not your Bluetooth. Try to do a Hard Reset, then check your device manager to see if anything for the Bluetooth comes. How long have you had the laptop for? It does seem like a hardware problem. If you had it for less then a year, then you are still in warranty, and I recommend that you call HP Total Care at 1-800-474-6836 North America or visit this link outside of North America.

  @laideyinka

  Thank you for joining the HP Forums! Regarding your question, yes your model has Bluetooth. Here is a document from HP on the use of Bluetooth in Windows 8 devices. It will show you how to turn on and connect to a Bluetooth device.

  Thank you

• Diagnostic tool hardware problems on Satellite has detected memory

  Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

  Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

  Is that what this has to do anything with overheating?
  Please help me immediately

  > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

  I would assume memory one or two failures of modules.
  I recommend you to check them both.

  Remove a module and try to use the laptop with a connected module.
  Then another module test. Make it as different memory locations.

  If two modules are corrupt, then you will need to replace both.

• Wireless - hardware problem?

  Hello world

  I have a laptop HP V3018CL. I have a wireless issue. I can not connect what either. But here's the weird part, I can't find my int Device Manager listed wireless card. I can't find in the Network Neighborhood properties. And the WiFi (in front of the laptop is sold red / (Orange)?) I'm not good with colors) (it was blue)

  I tried to re-install the drivers but without success. Can someone help me with this? What it means if the led is orange/red solid. And why can't find my device in the Device Manager? Thank you

  Sam.

  Message edited by SamNeddy on 02/11/2009 13:17

  Yesterday, I was chatting with HP support.
  
  It was the most frustrating conversation of my life. I told them exactly what I had done, the syptoms, everything and then the guy goes, we go just to install drivers. Even if I told them, it's a hardware problem, the orange light, the device, the update of the firmware Manager. All this fell on deaf years. It seemed that the guy knew nothing of the software support and read just via a script. arrrrggghhhhhhh! IT IS THE LAST TIME THAT I WILL EVEN INVEST IN A CV!
  
  so I just buy an adapter wifi for 30 dollars and call it a day!

• Satellite A200 reporting screens not correctable hardware problem blue

  My model Satellite A200 PSAFCA-01H00J is blue screening and reporting of a non correctable hardware problem. I disconnected all devices, including the mouse.

  All tests of memory and the device driver may report any problems. I unplugged and reinsert the two memory chips.

  There has been no hardware or changes to software other than Windows to auto update.

  This machine runs on Vista SP1. I dug the following message: Root cause found Bugcheck 124 unknown parameters 0x0, 0x95f7c3f0, 0xb2000040, 0 x 800. MSDN Info for this can be found at
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557321.

  Anyone know where I should look for this hardware problem?

  If you remove the second module of RAM is still blue screen?

  I saw 0 x 00000124 on a similar laptop and it was a problem of CPU.

• MBPr 2013 - is this visual glitch a hardware problem?

  

  Is attached a screenshot of my App Store as it is currently. This kind of effect 'glitch' also sometimes appears on my desktop. Add to that, twice in the last two days, my computer crashed randomly when using Chrome.

  The only known issue with my laptop is currently a low capacity battery - nothing serious, but it is less than 80% of the capacity of origin so OS X recommends a maintenance.

  Could this glitching and crashing (crashing has only just begun) be an indication of a more serious hardware problem?

  Thank you.

  You need a new battery in... work for the Genius Bar in the units of the retina.  Since the display problem can be demonstrated, they can look there as well.

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.

  
  

• Hardware problem potential keyboard T410

  Hi all

  Since yesterday I was faced with a problem with my T410, which is potentially due to

  a problem of material with the keyboard.

  A few specific keys don't work anymore. These seem to be the key to turning the power on, the Fn key.

  the Alt Gr key and the ThinkVantage button.

  I guess it's a hardware keyboard problem, since I can't use the Power On button for

  start the laptop. Fortunately, it is possible using the marketing of the fingerprint reader.

  When the laptop is running (using Windows 7) everything works fine, except the cited

  buttons. I can't access any functions of the keys (e.g., the reading light) Fn or Alt-Gr symbols (eg.

  the symbol that is on my keyboard press 2 @) or power down with the power button.

  I tried various easy fixes:

  * By ensuring all drivers are up-to-date

  * Remove and replace the keyboard

  * Static discharge procedure (unplug all power, 10 presses and holding of 30 sec of power button / stop)

  Check the Bios settings

  * Replace the battery

  * ...

  Unfortunately, it has not changed the situation.

  I wonder if the simultaneous malfunction of these specific buttons pointing to a certain

  hardware problem. I hope a replacement of the keyboard can solve this problem, but it could be a

  problem with the motherboard.

  Advice would be welcome.

  Thank you

  HD

  It's hard to say, it could be the motherboard (more unlikely). But more likely it is the keyboard that plays up. The keyboard is least expensive to test for specific problems that you mentioned in the T410, so it's the most cost-effective test for fault case.

• I have a Server R2 windows 2012 automatically switches out of his own for several times and it doesn't look like a hardware problem.

  I have a windows server R2 2012 which automatically switches out of his own for several times and it doesn't look like a hardware problem. and I have this problem every day.please tell me what is the reason

  Original title: r2 windows server 2012

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• ProBook 450 - second series of recovery media, blue screens windows 7 (win 8 okay, not the hardware problem)

  I had a new HP probook 450 G1.

  Immediately, I swapped the 750 GB for one SSD drive and tried to install Windows 7 from the recovery media. The operation has failed. Contact HP support, they sent new media.

  I used new media. Windows 7 operating system installed. As soon as I install the drivers, the PC goes in a loop of the blue screen.

  I can install the chipset drivers and wifi. Don't know what the other driver is causing the blue screen. I can also install from the windows media 8, so this isn't a hardware problem - wife hates just windows 8.

  Basically, please either give me a few troubleshooting steps or I'll go back to the PC. I'm NOT insterested in a manual process long to determine which driver is the problem and the recovery download media manually the drivers one... should work.

  After you have reinstalled the original 750 GB hard drive with the replacement media, I managed to an attempt to "recover". So, I decided to sit and try, by the process of elimination, all drivers.

  It turns out that the technology Intel Rapid Storage Technology driver was causing the problem. When I installed everything BUT that, the laptop works very well. Notice that I use a fairly new SSD Crucial of M500. It is quite possible there are other people out there see it. You really need to install the driver of rapid storage technology, it is fast enough - not not even 100% sure what good to give the driver.

  So I gave myself wrong guidance by the initial recovery of defective media. The second group of work recovery media, but the version of the driver intel 12.7.3.1001 does NOT work with the Crucial M500. I checked the Intel site for driver downloads, and it was not clear that they have a newer driver appropriate right now. Maybe someone else can tell?

• W700 touchscreen works do not (hardware problem)

  My Tablet seems fine, but I can't use the touch screen. The first time it happened it was December 18, and has happened for windows session. It seemed to be a stroke of luck.  Then I thought it was drivers or something.  I actually did a "System Restore" to 15.  When he returned to the top it worked.  But then it happened again... after waking up the next day.  Nothing to do with updates.  Now it doesn't work at all.

  Then it dawned on me to check my Android build on the same computer.  I also have an Android-AI as well as Windows boot - 8.1.  Of course Android also does not recognize the touchscreen.  In point 8.1 of Windows, in Control Panel configuration-system it says "no net or enter key is available for this view.  So this prompted me to stop fiddling with the drivers and updates since the site of Acer, Microsoft or Intel.  It must be a hardware problem.

  I am not under warranty:

  So I jumped the open machine.  I disconnected the battery for the whole night.  In order to get that I need to unplug the screen.  I fiddled with other things in there.  I was hoping that my violin would be reset some static or something that could be causing the problem.

  In any case... I need to replace? Or what could be the cause of the problem... Or I'm just watered... Doom just buy another device?  Just use it with bluetooth or wired usb things stuff?

  Normally, if there is a problem with the hardware with the touch screen it is the cable between the scanner and the motherboard. They come sometimes loose, causing the digitizer to no longer be recognized. If you have verified that carefully, and that the cable is not cracks or breaks, so it's going to be a draw upward, or the digitizer or the motherboard. Probably it would be cheaper to replace the digitizer to test, but you take the risk that it is the motherboard instead...