Look an article source

Similar Questions

• Legacy with defective power supply unit. Looking for replacement source

  RND4000 (ReadyNAS NV + v1 [v3]) group legacy with a power failure. Looking for replacement source. Not after replacement free of charge since it is obviously out of warranty and end of product life. However, it is a little expensive Kit to replace. If I did, I would still want to use it as a backup of synchronization for the new.

  I was unable to find any power supply corresponding by the name given to the unit (ST-220FUB-05F), all the results of my research resulted in a power different with smilar looks and namesake. Main differences are slight changes in the output rails, different output connectors. Also include a fan that mine didn't, perhaps a clue to the failure there.

  I was shocked to find that he was / is none replaceable fuse in the power supply and if there was a gauge commonent that he was unable to do the job because a cracket big mosfet to clean his radiator, think that's what it is, hard to see in here. Unable to find a replacement, I'll have to try to replace the component that is visibly damaged. Not easy because it's crowded in there and may fail because there are perhaps other failing components that didn't explode or evacuate. I really need ot get this unit backup and running.

  Help, please. Consider the purchase of an equivalent of second hand RND4000 for parts. See you soon.

  Hello EkDor,

  This replacement of power supply was free until supplies last and I heard they already ran out of it.

• Is it possible to look at the source code of the waterfall?

  I m currently developing on BB10, and I wanted to see how some controller works to create my custom controller.

  Is it possible to check the source code?

  # Cascades is closed source, at least for now. Also some stay that way at least until the launch of BB10 (and, as far as I know, a decade after that).

• Look for the 'Source' IPTC metadata to 5 Lightroom field?

  How is it possible to search for photos in Lightroom 5, where the IPTC 'Source' field is empty? Is it possible to add fields for additional metadata for library filters?

  The only way to find the IPTC Source field in LR is to use the criterion of "Available IPTC":

  

  This search all the "searchable" IPTC fields (Adobe specific exactly those whose fields are, but they include the Source).

  However, you want to find photos which the Source field is empty.  LR is a criterion "is empty" for most of the areas, but the normal way you would work around and that, for example for the title, is to:

  Title does not contain a, b, and c... x y z 0 1 2 3 4 5 6 7 8 9

  Unfortunately, this work around does not work in your case, since

  Available IPTC does not contain a, b, and c... x y z 0 1 2 3 4 5 6 7 8 9

  Returns only those pictures all the including IPTC fields are empty.  If there is a photo with a title of non-empty IPTC and a vacuum Source, this criterion would not go back to the photo.

  To find the field of the specific Source, you will need to use a third-party plugin, e.g. ExifMeta, Data Exploreror any filter.

• ADOBE DPS - Look an Article in the cloud of Folio Builder

  Hello everyone

  DPS learning and using Indesign CC and downloaded my folio with articles on my Adobe viewer in the cloud.

  Is on see we in my library on my wife's iPad - BUT when I want to download to view the file, a dialog said "he is ready to download, but have detected my Adobe Content Viewer.» There is also an icon at the base of the file with a page with the strike through line to this topic.

  Am on the last drive of content and no update available - signed to me to the Adobe viewer too. I have no selection dialog on the Folio Builder, which is to say an EXCERPT on MY DEVICE.

  What did I miss not being able to see and swipe the work I've done... Need to wire hard my mac to the ipad with a USB cable as I have heard (even if there is no USB port on this recent model?).

  Any input would be welcome and thank you: Daz

  You must redo your folio with a version of spectator target version 31 or lower. It is a known problem with the version of the viewer target 32 incorrectly being included in the current version of the folio builder Panel.

  Neil

• ARTICLE source or LOCATION FOR SALE does NOT exist in ITEMS/LOCATION

  Hi all
  
  
  
  So far we have loaded data into flat files Demantra. When you try to test the loading of tables oracle we are faced with the following question:
  
  The 3 file is quite simple:
  
  -File element: Dm_Item_code, Dm_Item_description;
  
  -Location: Dm_Site_code, Dm_Site_Desc, Dm_Org_code, Dm_Org_Desc
  
  -Turnover: Dm_Item_Code, Dm_Site_Code, Item_Price, ActualQty, Sales_Date.
  
  
  
  These files are loaded in T_src_item_tmpl, t_src_loc_tmpl, t_src_sales_tmpl with the sqlldr.
  
  In trying to push them to Demantra on the staging tables with the load_data.bat, the process completes successfully, but all sales records are thrown into the t_src_sales_tmpl_err with the error_message_record: "source POINT or LOCATION IN SALES does not exist NOT IN ITEMS/LOCATION.
  
  
  
  In addition to the note ID 742246.1 guides which you tips that should check?
  
  
  
  Thank you
  AMC

  Hello

  Queued for sales, you missed mentionign DM_ORG_CODE, I hope you have in thr. Check that the ORG SITE combination is held.

  -Turnover: Dm_Item_Code, Dm_Site_Code, Item_Price, ActualQty, Sales_Date.

  See you soon
  REDA

• I use MS publisher 2003 to create my website. When I look at using FireFox all I get is one sentence "successor to Huber Heights". Look at the source code FF sees it seems Ok. How the rest of the site to view?

  Site Web displays well in IE. 7. I use FF 5.0 on this computer.

  It is a document of MS Office with code VML and non valid HTML code.
  
  IE can only view these documents.

  Make sure that you disable the VML code and save the page as HTML code instead of as an Office document.

  • http://en.Wikipedia.org/wiki/Vector_Markup_Language

• How can I view source on an app (preferably before you install)?

  An app for Firefox OS is programmed in HTML and JavaScript. So, just like a Web page, I should be able to view the Source, right? This has always been the approach of empowerment of Mozilla, as far as I understand. View Source is ideal for learning by example (just like how I originally learned HTML!), but also for open audit. Ideally, I would like to be able to look over the code until I agree to install.

  If I go on https://marketplace.firefox.com/app/astroalpaca using the browser of my office, or if I find it on the market using my open ZTE, I see not an option View Source anywhere. Where is it please?

  I don't understand not to show it on a small screen phone, but there is no reason why a person visiting the market with a mobile office/computer browser doesn't have to download and inspect the app package.

  If there is no (I'm starting to suspect that this is the case), so where's my emancipation? What makes these apps fxos at least a consumer black box impenetrable android apps?

  Hello, if you look at the source code for the install button, you will see that the app is hosted at http://www.astroalpaca.com - see its source code through the browser that you're used to other sites...

• I have NO way to type in the site, of that I'm looking. What has happened in the field "address".

  When I'm on IE, I can type in the web address, hit "enter" and be directed to the place where I want to go. It is now in the Firefox application. Pretty weird.

  Hi ptorrie,

  Try going to view > toolbars > Navigation toolbar. That will bring the address bar back.

  I also see that you are using an older version of Firefox. You should consider updating. There are many benefits to the latest version of Firefox. If you are interested, take a look at article of knowledge Update Firefox to the latest version.

  Hope this helps!

• What happened to the option View / Source? I used it all the time

  How you look at the source code (HTML) for the page now that you have removed the option View/Source. I am now using Chrome for this reason...

  Use one of them:

  • Firefox > Web Developer > Page Source
  • Tools > Web Developer > Page Source
  • Right-click on a web page to open the shortcut menu and select the Source of the Page

• How can I return to the 'parent' source after following a link in the page source?

  After following a link in the page source, I would like to be able to return to the source 'parent '. The only option I found is the source is completely closed and open the source of the page once more. A 'return' option would be useful here...

  I just tried to look at the source of the page and the previous/next buttons on my mouse worked.

  If this isn't an option for you, another option is to view the Page Source to use an external application of your choice who has previous/next buttons the value. Dafizilla ViewSourceWith can be used to define an external application to view the source. You can also define an external application by changing hidden preferences 2, the following 2 links show what to change:

  • http://KB.mozillazine.org/View_source.Editor.external
  • http://KB.mozillazine.org/View_source.Editor.path

• several sources triggers digital i/o card

  I use the NOR-HSDIO Express (Acquisition) with map of the e/s high-speed digital (pxi-6542), to a Logic Analyzer.  It works fine but I need to use more than 1 source of relaxation, for example when 3 signals go data capture high (rising edge).  I don't see a way to do it in the window properties HSDIO Express, any ideas please?

  Hey svt4cobra6,

  I would recommend that you first find the summary of triggers using HSDIO page, and I think that you want to use a Model Match Trigger. Then you should check the Model Match Start Trigger (or similar reference C ) specific help. This trigger allows you to use a row of data to look at multiple sources of relaxation at the same time. So, if you have additional data lines, then use 3 of them and use the 'R' or 'r' in your start of model match trigger. For example do not care your pattern corresponds to 3 rows of data where there is a rising edge on the 3 lines at the same time could look like this, where 'x' is:

  "xxxx xxxx xxxx xxxx xRRR.

  I hope this helps.

  Kind regards

  DJ L.

• Where can I read article 871122 in the Microsoft?

  Original title: looking for article 871122 in the Microsoft?

  I have a DELL INSPIRON 1545 and my wireless zero configuration service is not available in my computer...
  How can I me it works on my laptop?
  Windows cannot set up my wireless connection.

  I want Windows to configure my wireless connection, and he told me to start the Wireless Zero Configuration (WZC) service.
  He told me to go to the Microsoft.com site for more information on the service (WZC) and he tells me to get article 871122, so my question is where can I find this article?
  How can I activate return on this service to obtain services wireless on my computer?

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Hope this works!

• How to apply the look across several clips

  In Adobe SpeedGrade, I look and I know how to apply it to a clip.  How to apply to multiple clips?

  If you're the direct link of first, I add an adjustment in the first layer and add the SpeedGrade LOOK to this adjustment layer.

  If you have something like a multicam editing, and all of your scenes are broken up, as in scattered amongst many other cuts, I do not add looks like this sequence. I add the LOOK to the source sequence.

• To create a similar website (was: look of the Web site)

  HI, I am creating a website to create an effect like this site: www.nicoosteria.com. When you click the navigation link the picture moves to the site in a corner.  I would create that looks like or similar to the product and/or the programming language you recommend to use?

  Thank you, Frank Smiley

  These are all the CSS transform property.  Look at the source code will show you that they used these properties after the click occurs:

  -webkit-transform: rotateY(-30deg) translateZ (0px) translateX (200px).

  -moz-transform: rotateY(-30deg) translateZ (0px) translateX (200px).

  -ms-transform: rotateY(-30deg) translateZ (0px) translateX (200px).

  transform: perspective (2000px) translateZ (0px) rotateY(-30deg) translateX (200px).

  The transition is made with the transition CSS:

  -webkit-transition: all 500 ms cubic-bezier(.63,.15,.69,.9);

  -moz-transition: every 500 ms cubic-bezier(.63,.15,.69,.9);

  -ms-transition: every 500 ms cubic-bezier(.63,.15,.69,.9);

  transition: every 500 ms cubic-bezier(.63,.15,.69,.9);

  -webkit-transform: translateZ (0);

  Definitely need to focus your learning on HTML and CSS to understand those that she will require hand coding.