Look at another computer on my network

Is it possible, via the router's Web page to view all the computers connected via my router so that I can "kick" any unauthorized person I have my router secure with a hexadecimal 16-digit, but there is always the chance that someone nearby 'hack' in there.  I have/know the IP address of all computers 'allowed' to this topic (3 of my own and 2 others), but I would like to be able to 'see' them anyway (just in case).

Mike

If the client is configured to obtain ip through DHCP addresses, then you can go to the network of 192.168.1.1---> status--> local--> table of DHCP client. In my view, that a client would not appear if someone gave it a static ip address. If you want their bar of your network, use the mac address filtering to "ban" of your network or allow only certain addresses mac on the network. Mac address filtering so an extra layer of security, but it's not bulletproof.

Tags: Linksys Routers

Similar Questions

  • another computer on your network is using your computer - Hack suspicion - ip address through DHCP lease renewal. Help, please

    Hello fellow Mac users...

    Today, while using, Firefox A message appeared on my screen: another computer on your network is using the ip address of your computer.

    Now, I am 100% sure that my phone was turned off when it happened. And I have a password on my wifi connection.

    I panicked because no one should have access to my network or my IP address. Immediately, I turned off my modem and turned off the wifi on my mac.

    Later, I went to renew the DHCP lease.

    My question is this:

    Could it be, in theory, based on the message system I (another computer on your network is using the ip address of your computer) the IP address was stolen (for lack of a better word) by a remote user, which is not in my physical neighborhood that is resident in another city or even country?

    If so, then I did the right thing by closing my Modem? And later on the DHCP lease renewal? About 20-30 minutes past until what I actually renewed the DHCP lease. It, in theory, could have too late to do (assuming that a malicious user has chosen to masquerade himself with my IP address)?

    Thank you all very much!

    I'm not a specialist iP/Wifi etc, I'm more than a convenience store of OS X, but...

    What was the popup of? -FireFox, the webpage or your Mac?

    If it's from the Web page--> then you may have entered a suspicious site that created an alert.

  • Writes a text file from a network computer to another computer on the network.

    It is possible to write a text file from a computer on the network to another computer on the network through labview without using FTP?

    Hi bebo_lm,

    It depends on how they are connected. If you have a 'normal' access to the pc and you can write on a hard drive of the other computer, you can use the writing functions of files or the copy of the file. If they are not connected like this, then you need another service. Why you do not use FTP?

    Mike

  • another computer on the network is using the same IP address that your computer uses. Each computer on a network must have a unique IP address. To resolve this problem, run Network Diagnostics

    another computer on the network is using the same IP address that your computer uses.

    Hi johnnyredd


    1. is connected to a domain or a server computer?
    2. what operating system is installed on the computer?

     

    You can refer to the link below and check if the information provided will help you-

    http://Windows.Microsoft.com/en-us/Windows7/get-help-with-there-is-an-IP-address-conflict-message

     

    Check out the link below to identify the operating system installed.
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

     

    I hope this helps.

  • trying to share a printer, so I can access it from another computer on my network, it seems to cross but the shared icon does not appear

    Original title: sharing printer problems!

    I am trying to share a printer, so I can access it from another computer on my network, it sems to cross, but the shared icon does not appear? Why is this?

    I'm on windows xp professional

    Hi Pazza1995,
     
     
    Follow the steps listed in the articles below and check if it helps to fix the problem:
     
     
  • Network says it has detected another computer on the network with my IP address.

    Original title: ip addy

    My internet access icon said that it has detected another computer on the network with my ip address, is there something that I have to take

    Try restarting your router.  It should solve the problem.

  • I get a message saying that windows has detected another computer on this network. I have another computer could be this one

    I get the message windows has detected another computer on this network.i have another computer could be this one and is it a problem?

    Hello

    1 have you added the other computer on the network?

    2 have you made changes on the computer before this problem?

    3. When do you have this error code or error message?

    The computer has detected in the network may be the other that you have, you will need to check the network and check the name of the computer. I would suggest trying the following methods and check if it helps.

    Method 1:
    You can get a new IP address from your computer. You will need to do if you encounter connection problems.

    a. Click Start. Type cmd in the search box and press ENTER.

    b. at the command prompt, type the following command and press ENTER:
    ipconfig/all (there is a space between ipconfig and /)
    The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    c. enough at the command prompt ipconfig and press ENTER. This frees up your current IP address.

    d. ipconfig / renew in command prompt and press ENTER.

    The DHCP configuration for all adapters is renewed. To renew the IP address for a
    specific adapter, type the name of the map that appears when you type ipconfig at the command prompt.

     

    Method 2:
    If the problem persists and you have not Windows Vista Service Pack installed
    then you can refer to the link below and check if you use the fix passes solve you the problem.

    http://support.Microsoft.com/kb/948363

    Hope the information is useful.

  • Conflict error IP - 'another computer on the network has the same IP address as this computer.

    "Windows has detected that another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log. "I don't know what to do.

    I use Vista. How can I find my Windows system log?

    You're welcome Marilyn and thanks for letting us know. Please do not forget to mark this post which has solved this problem as the answer, when you are sufficiently comfortable that it is. Good navigation! :))

  • another computer on my network has the same IP as my computer

    Hi - I started my laptop computer and received the message saying that above, and that Windows has detected an IP address conflict.

    What does that mean?  Someone else is using my WiFi signal?  What should I do to solve it?
    Thank you

    Enjoy reading the previous post and the response to see if it helps - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/ip-conflict-error-another-computer-on-this-network/aa5faada-7e81-41ef-913d-0150a9d90c1e

    It may be useful

  • Windows 7 - error message from the address conflict IP appears periodically. Error message "another computer on the network has the same IP address as this computer.

    Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

    Does anyone have a simple way (for a dummy) to solve this. If I disconnect my wireless router and laptop and turn the two again this sorts the problem temporarily, but it does not provide a definitive solution.  I use a new laptop and my old one has been scrapped, so I do not know whence this 'conflict '.  My old laptop had Windows XP operating system and my new Windows 7.  I hope that someone can provide a solution to this annoying problem.

    Hi Figgerty,

    have you tried these steps?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/IP-conflict-error-another-computer-on-this-network/4eed87e2-45FD-4FF7-ae29-9a9fb664a8cc

    B Eddie

  • error message says "another computer on the network has the same IP address.

    can interfere with my internet connection.  How can I fix this (plain English please.  "I'm not a COMPUTER expert.)

    This means that you have two devices with the same IP address on your network. It simply means that two machines are configured with the same IP address (you have a PS3, XBox360, another computer/laptop?).

    Each device needs a unique IP address works properly on a network. A reboot will usually solve the problem, unless both devices have their IP address a static address.

    Here's how you check/change it (Windows XP):

    1. click on START > network and Internet > network connections.
    2. double-click on your connection LAN or Internet.
    3. click on properties.
    4. click on the general tab.
    5. Select Protocol Internet (TCP/IP), and then click Properties.
    6. click on the general tab.
    7. select Obtain IP address automatically and DNS server automatically get an address.
    8 OK on all windows and when you are back on the desktop, restart your system.

    In addition, the Fund this site for more information!
    http://support.Microsoft.com/kb/306126

    I hope this helps!

    Brett M.
    Windows outreach team

  • "Another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

    Please, anyone can help as I don't know what to do? I am running Vista to the Windows Welcome page
    I am the administrator and I have no other computers attached to my laptop?
    I use the same USB port to connect to internet, but recently, I had to try another USB port I get the above error message.
    I have no idea how to do to correct the situation and would appreciate guidance step by step.
    Thank you.

    Hi RDCICON,

    1. which device you are connected to the USB port?

    2. you still get the same message when you connect the usb device or use the device on another computer?

    Method 1:

    You can try to run the tool built into Vista Network Diagnostics. To do this, click Start, go to network and select network share.

    On the left side of the window select the diagnosis and repair.
    It should help to find which device is listed with the duplicate IP address.

    Method 2: Release and renew the IP address by following these steps.

    a. Click Start. Click Run, type cmd, press ENTER.

    b. at the command prompt, type the following command and press ENTER

    ipconfig/release

    ipconfig / renew

    Method 3:

    Check and confirm the DHCP client service is started and set to automatic.

    If the DHCP client service is not running, then set it to autostart. Steps to set the auto service:

    a. click the Start button

    b. type services.msc in the search box.

    c. search for DHCP client and set it to automatic and make sure that it is started.

    Method 4:

    Reset the router and see if the problem persists.

    You can refer to the 3mentioned of general troubleshooting method in the following article to reset the router.

    http://support.Microsoft.com/kb/956196#Gm3

    You can also see the producers of the router manual or contact support for additional assistance.

    Hope this information is useful.

  • You can cancel the sync with another computer on a network?

    My desttop computer was set to automatically sync with a folder and its subfolders on another office in a network.  The purpose of the sync has been backup.  Today, the other computer had a malfunction serious and removed about 20 subfolders. The removal was detected immediately. I checked and found that missing subfolders were on my computer. BUT (I'M A FOOL!) I failed to realize that my computer was still periodically synchronize with the computer 'bad '. Suddenly, after about 10 minutes, subfolders missing from the 'bad' computer have now disappeared from mine as well! Immediately, I went to offline and off the synchronization mode once the horse was out of the barn.

    Is it possible to cancel fatal synchronization that deleted synched subfolders? -Can I somehow recover subfolders that had been so easily available on my computer?

    Yes, you can stop the clock, but no, you cannot cancel it (unless you have a backup of the files stored elsewhere).  You will need to retrieve the files and folders by using shadow copies (if you have one) or with the recovery software from 3rd party (see below for more details).

    If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

    If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

    In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

    http://www.r-TT.com/

    http://www.SnapFiles.com/get/DiskDigger.html

    http://www.SnapFiles.com/get/easusdfr.html

    http://www.SnapFiles.com/get/restoration.html

    http://www.SoftPerfect.com/products/FileRecovery/

    http://www.SnapFiles.com/get/undeleteplus.html

    http://www.Piriform.com/Recuva

    http://www.munsoft.com/EasyDriveDataRecovery/

    http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

    The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

    Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

    Good luck and I hope this helps!

    Lorien - a - MCSE/MCSA/network + / A +.

  • Start another computer on the network when it is in "standby"

    I would like to have a computer on our network to wake up another computer that is in sleep when the first computer tries to access files shared asleep computer. Is this possible?

    It is possible, but it is quite an advanced task.  If I understand correctly, it requires that computers be using network LAN cables, no wifi.

    A limited intro is available here: http://windows.microsoft.com/en-US/windows7/What-are-Wake-on-LAN-capabilities

    But basically, it varies widely depending on your hardware, the system chipset and network equipment.

  • We have Adobe Acrobat Pro DC loaded on a computer, and I want to share with another computer over the network.  Must I pay $ 120 to get the serial number?

    Is it really necessary to pay for another FULL of Adobe Acrobat Pro DC version so it can be used on another computer?   Even if we are on a network.

    As far as I know, Adobe programs are not running on a network... If you have computers A and B, and the program is on A, it cannot be run on B on the network, it must be installed on B to work

    More info about kglad said...

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

    -Two activations for a single account CAN NOT be used at the same time (to be noted in the link above of the license)

Maybe you are looking for

  • HP pavilion dv4000: I forgot the BIOS password

    My laptop is locked by a password of BIOS for almost two weeks now and I've tried a few numbers and he brings mo to one ' disabled system | message box or dialog box and there number written below hope (10935), can someone help me on my problem thnx.

  • Windows Vista will not install Service Pack 1

    Hello, I have an Acer laptop that has Windows Vista 32-bit Basic on it.  I did a factory reset on it and started to update Windows.  It says it installs successfully in 30 seconds about, but when you do another search that Service Pack 1 is found as

  • Explorer Windows in Windows 7 appears

    When I click on the "Windows Explorer" icon, I get now "Libraries" instead of drive 'C' etc and I can't figure out how to recover the C drive. What have I done? Thank you

  • Change icon when receive new data content in the browser push

    Hello I grow data type: content browser. (no channel). When my widget receives new data, I would change the application icon. How can I do? Thank you

  • How to detect the compatibility mode on BB 9530

    Hi guys ' My application works fine when compalibility mode is disabled on BB 9530 storm. But this (compalibility mode) mode is activated after the downloaded application. I want to detect it as compalibility mode is disabled or enabled. How to detec