Start another computer on the network when it is in "standby"

Similar Questions

• Conflict error IP - 'another computer on the network has the same IP address as this computer.

  "Windows has detected that another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log. "I don't know what to do.

  I use Vista. How can I find my Windows system log?

  You're welcome Marilyn and thanks for letting us know. Please do not forget to mark this post which has solved this problem as the answer, when you are sufficiently comfortable that it is. Good navigation! :))

• Writes a text file from a network computer to another computer on the network.

  It is possible to write a text file from a computer on the network to another computer on the network through labview without using FTP?

  Hi bebo_lm,

  It depends on how they are connected. If you have a 'normal' access to the pc and you can write on a hard drive of the other computer, you can use the writing functions of files or the copy of the file. If they are not connected like this, then you need another service. Why you do not use FTP?

  Mike

• another computer on the network is using the same IP address that your computer uses. Each computer on a network must have a unique IP address. To resolve this problem, run Network Diagnostics

  another computer on the network is using the same IP address that your computer uses.

  Hi johnnyredd

  
  1. is connected to a domain or a server computer?
  2. what operating system is installed on the computer?

   

  You can refer to the link below and check if the information provided will help you-

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-there-is-an-IP-address-conflict-message

   

  Check out the link below to identify the operating system installed.
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  I hope this helps.

• Network says it has detected another computer on the network with my IP address.

  Original title: ip addy

  My internet access icon said that it has detected another computer on the network with my ip address, is there something that I have to take

  Try restarting your router.  It should solve the problem.

• Windows 7 - error message from the address conflict IP appears periodically. Error message "another computer on the network has the same IP address as this computer.

  Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Does anyone have a simple way (for a dummy) to solve this. If I disconnect my wireless router and laptop and turn the two again this sorts the problem temporarily, but it does not provide a definitive solution.  I use a new laptop and my old one has been scrapped, so I do not know whence this 'conflict '.  My old laptop had Windows XP operating system and my new Windows 7.  I hope that someone can provide a solution to this annoying problem.

  Hi Figgerty,

  have you tried these steps?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/IP-conflict-error-another-computer-on-this-network/4eed87e2-45FD-4FF7-ae29-9a9fb664a8cc

  B Eddie

• How to backup to a folder password protected, located on another computer on the network?

  Hello

  My OS is Windows 7 Professional. I have configured windows backup back up some of my files on a network share on a daily basis. There are people other than me who have administrator privileges on the computer on the network where my backup is stored. My problem is to password protect the share network folder as windows backup on it my computer can be done automatically. The computer where the backup is stored is a machine to windows server 2008.

  Any ideas or suggestions?

  Run the task as a backup operator, add yourself as a member of the backup operators group.  You can do this with the console "Users and groups", to open the console type lusrmgr.msc in the box run from the start menu.

  John

• error message says "another computer on the network has the same IP address.

  can interfere with my internet connection.  How can I fix this (plain English please.  "I'm not a COMPUTER expert.)

  This means that you have two devices with the same IP address on your network. It simply means that two machines are configured with the same IP address (you have a PS3, XBox360, another computer/laptop?).

  Each device needs a unique IP address works properly on a network. A reboot will usually solve the problem, unless both devices have their IP address a static address.

  Here's how you check/change it (Windows XP):

  1. click on START > network and Internet > network connections.
  2. double-click on your connection LAN or Internet.
  3. click on properties.
  4. click on the general tab.
  5. Select Protocol Internet (TCP/IP), and then click Properties.
  6. click on the general tab.
  7. select Obtain IP address automatically and DNS server automatically get an address.
  8 OK on all windows and when you are back on the desktop, restart your system.

  In addition, the Fund this site for more information!
  http://support.Microsoft.com/kb/306126

  I hope this helps!

  Brett M.
  Windows outreach team

• "Another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Please, anyone can help as I don't know what to do? I am running Vista to the Windows Welcome page
  I am the administrator and I have no other computers attached to my laptop?
  I use the same USB port to connect to internet, but recently, I had to try another USB port I get the above error message.
  I have no idea how to do to correct the situation and would appreciate guidance step by step.
  Thank you.

  Hi RDCICON,

  1. which device you are connected to the USB port?

  2. you still get the same message when you connect the usb device or use the device on another computer?

  Method 1:

  You can try to run the tool built into Vista Network Diagnostics. To do this, click Start, go to network and select network share.

  On the left side of the window select the diagnosis and repair.
  It should help to find which device is listed with the duplicate IP address.

  Method 2: Release and renew the IP address by following these steps.

  a. Click Start. Click Run, type cmd, press ENTER.

  b. at the command prompt, type the following command and press ENTER

  ipconfig/release

  ipconfig / renew

  Method 3:

  Check and confirm the DHCP client service is started and set to automatic.

  If the DHCP client service is not running, then set it to autostart. Steps to set the auto service:

  a. click the Start button

  b. type services.msc in the search box.

  c. search for DHCP client and set it to automatic and make sure that it is started.

  Method 4:

  Reset the router and see if the problem persists.

  You can refer to the 3mentioned of general troubleshooting method in the following article to reset the router.

  http://support.Microsoft.com/kb/956196#Gm3

  You can also see the producers of the router manual or contact support for additional assistance.

  Hope this information is useful.

• We have Adobe Acrobat Pro DC loaded on a computer, and I want to share with another computer over the network.  Must I pay $ 120 to get the serial number?

  Is it really necessary to pay for another FULL of Adobe Acrobat Pro DC version so it can be used on another computer?   Even if we are on a network.

  As far as I know, Adobe programs are not running on a network... If you have computers A and B, and the program is on A, it cannot be run on B on the network, it must be installed on B to work

  More info about kglad said...

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations for a single account CAN NOT be used at the same time (to be noted in the link above of the license)

• How to import bookmarks from another computer on the network?

  I have an old computer that has firefox on it with a large number of bookmarks. I want to import the bookmarks into this new computer on my home network. How can I do this? It would also be useful if in the course of the transfer bookmarks would get in alphabetical order.

  You can export to HTML bookmarks in the Bookmarks window. It's now called "show all bookmarks". The last button on the toolbar in the window is the one that you are using and choose export. You can then save the bookmarks in HTML whenever you want. With the new computer, use the same toolbar button and choose Import and import the HTML file.

• monitor the activity of the child on another computer on the network

  I want to monitor my kids on the desktop when they sign on. I would like to have this information sent to my laptop which is also on the same network

  A good solution is to use Windows Live Family Safety:

  http://explore.live.com/Windows-Live-family-safety

• Unable to remote connect to another computer on the network home

  Greetings,

  I have a Windows 7 desktop computer and a laptop Windows Vista Edition full.  I am able to connect using the program of remote connection to the laptop from the desktop, but not the laptop on the desk.  I get
  an error that says "Remote Desktop disconnected' and inside the box, he says" this computer can't remote not connect "and communicate with the administrator, me.

  I turn off the Norton firewall on the desktop and no luck.  I typed the IP address and the name of the desktop computer.  Both get the same answer.  I ping the desktop from the laptop.

  Any suggestions?

  Hello
   
  1. which is the edition of Windows 7 is installed on the desktop?
   
  We recommend that you first of all to you allows to cross check if remote desktop connection settings are correct on the Windows 7 computer. To do this, follow these steps.
  1. Click Start, right-click computer and click Properties.
  2. in the left pane, click Remote settings.
  3. in the System Properties window, click use remotely.
  4. make sure that the following settings are applied.
  a. allow for Assistance connections to this computer remotely.
  b. the remote desktop section, select "allow the connection of computers running any version of remote desktop (less safe).
  5. apply the settings.
  6. restart the computer and try to connect to the remote computer.
  
  For more help on desktop connection remotely, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems
  For more information about remote desktop, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I want to take a screenshot of another computer on the network of labview

  How could perform this...

  Computers A and B Compuer are connected to a network.

  Computer has labview

  Computer B has a labview.

  I want to be able to A computer with labview to take a screenshot of computer B.?

  I tryied to watch thightVNC or UltraVNC and they have not run an activex server so I can do... is there any other way?

  I haven't used, but I heard good things about Sikuli to automate actions such as screenshots or clicks of mouse on remote PCs.  It is a python based utility.

  http://doc.sikuli.org/screen.html

• How can I connect to my database externally from another pc on the network?

  Hi all

  I just install 12 c on my Oracle Linux box and I am able to connect locally to the database, as intended. Now, what would be the first step to connect to my external database from another computer on the network. By example, if the database server is 10.0.0.150 and I want to connect to 10.0.0.151 how can I make this happen? If necessary here are a few references:

  -bash-4, $ 2 cat listener.ora

  listener.ora # Network Configuration file: /ora01/app/oracle/product/12.1.0/db_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oranode1.dba.com) (PORT = 1521))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  -bash-4, $ 2 cat tnsnames.ora

  tnsnames.ora # Network Configuration file: /ora01/app/oracle/product/12.1.0/db_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ANTHONYDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oranode1.dba.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = anthonydb)

  )

  )

  -bash-4, $ 2 cat/etc/hosts

  127.0.0.1 oranode1 oranode1.dba.com localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  10.0.0.150 oranode1.dba.com oranode1

  Let me know if you need any information. Currently, I am not able to connect to my database using the IP and port (10.0.0.150, 1521) of my 10.0.0.151 pc. Thank you all for your help in advance.

  Hello EdStevens,

  I tried to use the SID with SID = anthonydb and I got the same error message. I believe that we must resolve before listener troubleshoot us this error...  If we look at the file of the listener:

  [oracle@oranode1 admin] $ cat listener.ora

  listener.ora # Network Configuration file: /ora01/app/oracle/product/12.1.0/db_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = oranode1.dba.com) (PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.0.0.150)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / ora01/app/oracle

  I have two entries, and I think that I should remove the last entry:

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.0.0.150)(PORT = 1521))

  )

  I created a backup of the file listener and I'm going to give it a shot.