error message says "another computer on the network has the same IP address.
can interfere with my internet connection. How can I fix this (plain English please. "I'm not a COMPUTER expert.)
This means that you have two devices with the same IP address on your network. It simply means that two machines are configured with the same IP address (you have a PS3, XBox360, another computer/laptop?).
Each device needs a unique IP address works properly on a network. A reboot will usually solve the problem, unless both devices have their IP address a static address.
Here's how you check/change it (Windows XP):
1. click on START > network and Internet > network connections.
2. double-click on your connection LAN or Internet.
3. click on properties.
4. click on the general tab.
5. Select Protocol Internet (TCP/IP), and then click Properties.
6. click on the general tab.
7. select Obtain IP address automatically and DNS server automatically get an address.
8 OK on all windows and when you are back on the desktop, restart your system.
In addition, the Fund this site for more information!
http://support.Microsoft.com/kb/306126
I hope this helps!
Brett M.
Windows outreach team
Tags: Windows
Similar Questions
-
A message came that said, Windows detected another computer with the same IP address. "... or similar message to one, that could just be the functioning of the laptop for the wireless?
MurrayJoe:
> Mean someone has or may have access to my PC or laptop?
You mentioned a wireless laptop. Do you get this message at home (when your laptop is in communication with your own wireless router), or that you get this message when in a public hotspot?
If at home, then I would be not too concerned (what security options enabled in your home router?).
If you get the message while using a public access point, this does not necessarily your computer has been hacked... but it is a warning that you should not ignore. In general, I would not go to any site that has my financial data, or any other sensitive data, a public hotspot. There are too many ways that a public hotspot may be compromised.
Your original post said that "a message came that said, Windows detected another computer with the same IP address.
There are several reasons this could happen... some innocent people and some not so innocent.
If your network is configured for the most common way, then your router uses a feature called Dynamic Host Configuration Protocol (DHCP). You can read about DHCP here...
http://en.Wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol
Basically, when a device on your home network needs an IP address, he asks your router and your router assigns an IP address... technically, "rents" the router address for a given period (one day). Once this period has elapsed, the device must 'renew lease'.
DHCP stops you from the hassle of having to assign a static IP address to each device on your network and then don't forget to retrieve that meet if/when a device are removed from your network.
Sometimes the process DHCP can be confused and assign the same address on multiple devices. If/when this happens, communication between devices on your home network may be confused. Windows is smart enough to detect that another device on your home network has the same address as the computer where Windows is currently running..., but Windows can not solve the problem.
You can determine the IP address of the computer that is running Windows (and posted the message you saw)... by entering "ipconfig" (without the quotation marks) at a command line prompt. Then you can check the IP addresses of all devices on your network until you find the other devices with the same IP address. Then you could say either every device to get a new IP address of the router (or restart the device). Alternatively, you can try just stating the computer that is running Windows to get a new IP address (by first entering "ipconfig/release" then "ipconfig / renew" in the command-line invite him... all orders without the quotes).
But since you said that you are not very tech savvy, my first suggestion was the easiest... just shut everything in your network, and then restart one at a time by starting with your ISP device, router, and other devices. If the problem persists after that, then more troubleshooting (as described in the previous paragraph) would be necessary.
I hope this helps to clarify the issue for you. If you have any questions, please post them and I'll try to answer.
-
Whenever I start my PC, a message appears, says another user using the same IP address.
Is this a problemYes. One or both may not work properly. If you use static IP ADDRESS a simple reboot of all devices should correct this.
-
another computer on my network has the same IP as my computer
Hi - I started my laptop computer and received the message saying that above, and that Windows has detected an IP address conflict.
What does that mean? Someone else is using my WiFi signal? What should I do to solve it?Thank youEnjoy reading the previous post and the response to see if it helps - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/ip-conflict-error-another-computer-on-this-network/aa5faada-7e81-41ef-913d-0150a9d90c1e
It may be useful
-
am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address
am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address
Thatmessage normally means a another computer on your local network has the same IP as the computer you are on.
You control your Local network?
-
When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.
I need helpKind regardsThank you very much!
To host successfully a FSX session what follows is the key enabling
my client (s) to join my host FSX session!
"Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."
6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...
Only a single router in my configuration of the DMZ, the external network to the router,
in this case, the 2 wires, had defined port forwarding.
Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.
5 high to the author!
-
I use Photoshop Cs5 on a PC that has been installed by the manufacturer of my PC in 2011, I tried to use it yesterday, and I get an error message saying to re - install the program. I have no knowledge on how to help.
Hello
Please access "' programs and features'" and uninstall the Photoshop CS5 and access the link as follows to download the program installation of Photoshop CS5 and re - install and activate it with the serial key you have.
Download Adobe Creative Suite 5 products
Thank you.
-
If I install CC on one computer, then after having worked on this computer for awhile I install United Nations. Is that what I can then reinstall CC on another computer under the same license? Thanks for your attention
You can activate the product on two computers, if are not the product on a computer before the uninstall, it is always better to disable the CC from this computer.
To turn off
launch no matter what CC products and click Help > log out.
-
error message saying that it is the wrong key when you use a sticker
Product key
I have an OEM version of vista Home premium. I'm trying to load on an acer extensa 5420 using the product key on the bottom of the laptop. When I enter the key, I get an error message saying: it's the wrong key. How can I use this disc to reinstall windows?
Hello
The OEM recovery disks are the brand and the specific model
You can't use a disc from another manufacturer
How to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Initially, emails were received but could not send. Clicking new e-mail program stops. or crashes now the computer will not receive e-mails. I can go to the other office and receive and send e-mail messages on another computer.
Hello
Given that the problem is related to hotmail, I suggest you to post the question in the forums and check them off below if it helps:
http://windowslivehelp.com/solutions.aspx?ProductID=1It will be useful.
-
to connect to another computer in the same room
How can I connect to the computer in the same room, I have broadband and use an adapter to run two computers. I want to be able to see what's been done on the other computer
Hello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.You can also configure an ad - hoc network that looks to use the cable above in that it
only connects the two machines directly however by wireless.Do you already use a router? If so you can network through it.
====================================
You can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Serious error message says that it is the video driver
When I put my computer to sleep, it freezes and I have to do a start-up difficult. Then I get a message saying that I have recovered from a serious error and takes me to the Microsoft site that says I have a video driver issue. Downloaded but drivers past yet, any ideas?
You can open event viewer & more details on errors, click on the url
locked up with her, this opens KB help/support for xp... Addition, go to run, type: DXDIAG
Run the video test of Direct X...
-
I need to know what I can do from here?
I can't click on my desktop, start menu or any other article... the only page that I discovered is my login page
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How can I fix an error message saying "could not read the manifesto of chrome?
Unable to read the chrome manifest ' queue: / / / C:/Program % program % 20Thunderbird 20(x86) /Mozilla % 20Files / chrome.manifest'.
All of a sudden, I can't connect to the server '? ' and I get some error messages. The above more "the RETR command failed" and "sending the password has failed, #AUTH701 Service unavailable."
I tried to remove my password of memory and he asked me again but no joy. I checked and my webmail - Yahoo - works fine. TB won't just go get him. Can I get help from anyone please?The problem is that the ATT / Yahoo email service is apparently run by kindergarten children and no client att is getting what they pay for. They give a list of messages to thunderbird, it can recover, then say gotcha I can't get back them. ATT it works not. You use their mail add in a browser.
I speak of this here http://thunderbirdtweaks.blogspot.com.au/2013/04/the-retr-command-did-not-succeed-thank.htmlHowever, if you dig into your Thunderbird profile, locate the popstate.dat file and delete it.
Menu (alt + H) help > troubleshooting information
Click the display folder
Close Thunderbird
Navigate to the mail folder in the Explorer window that opened.
Now the att.yahoo or any name server they use this week.
popstate.dat will be in this folder.
Delete this file makes Thunderbird forget where it is up to download mail from Yahoo, apparently changing id numbers at random intervals or something. The result is that you have left on the server is downloaded again.
So, you can this add-on to clear the mess. https://addons.Mozilla.org/en-us/Thunderbird/addon/remove-duplicate-messages-Alte/?src=search
I blame ATT / Yahoo also are about 99% of the people who come on these forums about this ATT/Yahoo customers. But it could be the continuation of security they provide as well. McAfee caused problems with Thunderbird for over a year and my best recommendation is to not let anywhere near your mail. It is, however, something quite unique to Att / Yahoo that does not exist until they became involved with the yahoo service.
-
When I send an email-error message says cannot save in the folder
do not save my emails sent in the sent folder. When I click on send a new email... I get an error message that says: it can not save to the sent folder. Just started using TB yesterday.
I have a similar problem, except that my progress bar never stops. The last thing I should read is message saved in the sent folder. If I close the window, the message does not appear in the sent folder. I must tell you that I've been using Thunderbird for several years now. Since yesterday, it was working fine. Now it isn't and that left me scratching my head.
stevecc
Maybe you are looking for
-
How to stop enforcement music to open on my iPhone when I plug my headphones?
I have an iPhone 6 installed the last version of the software. I noticed for a few updates ago that when I have more in my headphones, music app opens, even when the phone is locked. I find it really irritating that there are obviously many other rea
-
Updated the HPE-063uk graphics card
Hello, I want to move to a GTX460 or similar, but I'm not sure that the motherboard MSI MS 7613 will take cards double deep slot. Am I stuck with low-profile graphics cards? Thank you
-
How to close 6840 after finishing work
HP deskjet 8640 I can set it to off after the print job completed. The light stays on for hours after I used the printer for a job.
-
I have connected my laptop to my TV, but cannot see that my screensaver. I can't see my screen icons or toolbar. How to see these?
-
Respond to a voice message to another Subscriber 4.2 (1)
I noticed that I can't answer another Member who left me a message -box of the unit -response from Subscriber to Subscriber It was the option '4' to respond to voice mail with a voice message, but no luck. I also tired of "44" to call the Subscriber