Looking for advice reg Oracle 12 c installation on Ubuntu

Similar Questions

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• HP ENVY 700-230ea desktop: looking for advice to update for my HP ENVY 700-230ea desktop computer

  Hi all

  looking for advice to update for my 2 year old want 700-230ea descktop

  thought in the following way

  Replace the boot wth drive a fast SSD

  Doubling of the Ram of 16 MB to 32 MB

  Add a better graphics card.

  Just struggling to find compatibel points, so everyone has any idea, what type of memory should I watch so that its compatibility with the existing 2, 8 meg sticks

  SSDS seem to be a source of confusion that mine field that I should look for use as boot drive.

  Graphics card will be limited to what the power supply can turn off, someone knows what it supports current graphics cards go.

  Thanks for any help on this.

  @Paul80, welcome to the forum.

  Here's memory and SSD who are recommended by Crucial memory.  They make great products for OEM computers.  You have to open the case and check of installed memory brand.  Then contact the Crucial Tech Support to see if their memory will be compatible.  The main problem with the addition of memory, it's buy the memory that is compatible with existing modules.

  The best way to install the SSD, it's letting the existing connected HARD disk as it came from the factory.  Connect the SSD drive to another SATA port on the motherboard.  Install the cloning software that you will use on the HARD drive.  Open and select the SSD as target disk.  Once the SSD is cloned, disconnect the HARD drive and start.  The start of shoul for the SSD system.

  As for a video, here is a card that has very good reviews.  Read the reviews to see what users have to say about it.  It should work well with your power supply unit (PSU).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Looking for advice for a new user to vmware

  Hi all

  Looking for a help and advice for a rookie to vmware

  We have just purchsed 3 x DL380 G8 each with 8 x 1 TB HARD drive no storage shared, and we are currently approved for most part more packs 2 x.

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host. I'd like to reproduce our exchange 2010 essentially server but that is currently on the phyiscal material and I would need to first do a P2V conversion. I also read a few negative articles on running exchange on a virtual computer.

  I had read a little and looks like FT is outside the quetsion because of having not shared storage in place and there is also the limitation of 1vcpu. So I was wondering where to start really. For any tips, pointers, etc. will be very much appreciated.

  Thanks in advance for any help.

  Welcome to the communities...

  As you use Essentials Plus, you can order vSphere Storage Appliance you can use a shared storage. Make sure that the hardware is compatiable with vSA (http://blogs.vmware.com/vsphere/2012/12/major-hcl-changes-for-the-vsphere-storage-appliance-vsa.html)

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host

  vSphere HA done for you if you are eligible.

• Looking for a specialist Oracle, named Wilson Crawford

  Hello, dear users of the forum.
  
  I'm sorry, beforehand, this message is not appropriate for starting the oracle forums, because it has nothing to do with oracle technologies.
  I'm looking for Crawford Wilson appointee. I know it's stupid to ask this question, as with the same name, there could be more than one person.
  The problem is that I have sat exam Oracle in February and was waiting for my certification this month and today I got, but when I opened it, I saw that it of not mine and belongs to another person, named Crawford Wilson.
  
  So, here put a thread, hopefully find him and make him know about it, maybe he also got my certificate, by mistake
  
  Thanks in advance!

  Ehtiram salvation,

  I have a feeling it is usually one of the cases when you need to send an email to [email protected], provide your personal information (name, mailing address, test id) and describe your problems list it as you did here.
  In a better situation Brandye (moderator of the Forum Certification) will see this thread and can have a look at the files in the OCP, but I suspect she'll ask you to send an e-mail to ocp-fullfillment_ww.

  I hope this helps.

  Kind regards
  József

• Looking for advice of vector drawing tablet

  Hi all

  I use CS4 for awhile now (to most of my free time) and have gotten quite into drawing cartoon versions of friends, family, etc. I work just from photographs in the past and have generally used Illustrator to achieve this.

  My results up to now look like this: http://crockstarlimited.com/blog/about/ (sorry, these are the only examples that I have online at the moment). I asked about how to improve my technique for this, and so my question is double:

  1. anyone who has used a drawing tablet (like this: http://www.amazon.com/Wacom-UPTZ431W-Intuos-3-Digital-Writing/dp/B001NANLOI)? If so, do you have recommendations on what to look for or who is particularly good?

  2. does anyone have advice for this style of drawing?

  know how to use Photoshop instead of Illustrator?

  Thanks much for any help you can provide!

  Crock

  Illustrator by far. You have much more control over your drawing in a vector program. Changes are easier. You can still import the PS more later to add effects. All digital illustrators I never contracted with that worked in artificial intelligence without exception. The main file is always vector they can bring an image in PS for some added effects. But the top of the line illustrators can do incredible effects in artificial intelligence without ever entering Psalm

• Manufacturing of the simpler regions on a map of the world... looking for advice

  Hello, I use a card world that initially came is Wikimedia: http://commons.wikimedia.org/wiki/File:BlankMap - World - Microstates.svg or istockphoto, I don't remember which exactly but they are both built in the same way - where each country in a general field is grouped.

  I want to associate groups of different countries in the regions, as in the example of Asia in the image attached to this issue. Countries have thin lines as borders, what I'm looking for the easiest way to delete and merge into a single plan.

  This will finally on the web as an image vector interactive mouseover (have not yet decided on flash or javascript, canvas, svg, vml), so removing the extra points are essential in the size of the file and maintainability.   Advice will be greatly appreciated.

  Thank you

  Court

  (PS: I had actually posted a similar question before, but this card seems to me does not make the process explained to me previously.)  Since each country has it's own/track of the border, I can't use the Scout to solve)

  I still don't see your image after, but one thing you might want to check before you apply the pathfinder is to see if the accident vascular cerebral/sketch of the country has been extended to a path and if so, make sure that you also select those with the forms of the country. I came across some images of stock vector map, which is the case. If this isn't the case, and your forms simply do not match very well, a quick way to get rid of all the borders remain unwanted would choose the resulting shape you created using Pathfinder and selecting the brush of Blog (assuming you have CS4) with her has the same color as the fill color of the shape you want and just painted on gaps. It would be much faster to try to remove it with the pen tool.

  Larry,

  The OP is looking to reduce the number of control points in the image.

• Student looking for advice

  I am the proud new owner of Adobe Production Premium and want everything to work as easily as possible. I hunted around for some and found a few recommendations, but many of them are simply not practical for my situation and budget. My hope is that members of the forum can help me understand what my options are.

  Material

  So, what I have for the material is not the greatest, but it was also good that a deal I could get at a price I could afford:

  Dell XPS 15 with an i7-740qm (1.7 GHz up to 2.9 with mode)

  6 GB of RAM (I'm sure that of 1300)

  NVIDIA GT 435M

  600 GB 7200 RPM HARD drive

  (750 GB 5400 RPM HARD drive (external USB 2.0) - not very useful for video editing, I know )-I don't know how I ended up dating Best Buy this one. I knew from the beginning that I would like something more quickly. Moment of weakness I guess.

  As a note, the XPS 15 has 2 USB 3.0 ports and one of these ports eSATA/USB combo. So here's my connection options.

  Budget

  Basically, my budget is as "as good as I can get while being affordable as possible." I'm willing to spend as much as I need to have the experience of a workflow that is usable. If people could give me an idea of what I might get to vary spending varies between $100 and $1000 would be great.

  I can't spend a lot, but I'd rather spend a little more to buy something that would work well, as opposed to the bare minimum expenditures and get something that barely works.

  What I'm working with

  Mostly 1080 p AVCHD from Panasonic hmc150. I know that can be a bit much for my system, but a guy can hope, right? I peut (but not too likely, especially if I have to spend more than I was expecting for the edition of solutions) buy my own camera and use it. In this case, it would almost certainly be a (T3i/T2i) DSLR, which as I understand it got too difficult to work with codecs.

  I use my system to edit video, create effects visuals (more or less complex, including the 3D compositing) and live action, as well as all other tasks related to the creation of films and videos.

  I'm looking for

  At this point, I can't not realistic look at the purchase of another computer. As I use a laptop, there is not much I can do to upgrade options either. So, I hope that what I have is it usable. If what I absolutely will not work, I guess I'll have to consider shooting in 720 or * shudder * SD .
  What I'm looking for so is hard drives. How do I absolutely need, what I should get, and how do I configure my system/Adobe to better use the readers I have and would need to get?
  Experience up to now
  I tried a few test footage with my setup current (all on the internal drive) and comes to the conclusion that I should probably make something. It seems that as soon as I start to do anything After related Effects or add simply no effect whatsoever, my system starts badly. It makes me wonder how can my school of aging of the Mac Pro with pitiful amounts of old dated pretty processors and RAM manage working with the same images in FCP. In this case the film is stored on the server of the institution, that I don't know the technical details.
  So, apologies for the post of ginormous and sincere hope that someone (s) can help me understand this stuff.
  Thank you very much!

  WD Scorpio Black 500 GB 7200 RPM 16 MB cache car has an EXCELLENT overview of the result of Newegg users and a 5 years wtty. ; It costs $69.99. (I would recommend only)

  With regard to your external drive 5400 RPM, Yes, it would be great for backups.

  Jim

• Looking for advice before you start. My goal is to dual boot Windows 7 and 8

  Currently, I have Windows 7 installed on one drive as well as the preview of Windows 8 on another. I bought Windows 8 pro upgrade. I need to remove this version. I have Windows XP and Vista if necessary to install, but was hoping to avoid this if possible step. Any advice is welcome.

  Skawas

  so thank you... I came for just this response. My drive is on its way from NewEgg and I will follow your instructions

  appreciated ;-} big Pan

• Looking for advice on what to do now.

  I spent each working of free time between flash, fireworks, and Illustrator for quite awhile now.  I spent every night after work in collaboration with lynda.com tutorials.  It's been great.  My goal was to learn all the basics of web site design.  I even created a complete and thirty layout in fireworks.  The problem is that I feel stuck now.  I do not see the apps play nice with them.  At least when it comes to export the full site designs from one application to another.  I took an example fxp file and there more Fireworks to the catalyst.  He looked at all kinds of messed up.  The Fireworks to Flash was that less messed up but still unmanigable.  Complete the sections where screwed up.  So I was wondering what process to use to move from one application to another.  Essentially to get all the items you need while not fubaring the layout.  Should I just do little things and then export them in one of the applications.  I have no real idea about the direction.  My goal is to take the site I have developed in fireworks and add a few small flash between the catalyst and the main Flash content.  I want to do all this while trying to not destroy what I spent months in Fireworks.  Any help woul be nice.

  Most of the web stes have three designs different page - design home page, content page design and design notes pages. The other pages are simply copies of one of these three. Therefore, when you design a site in Fireworks, it makes your job a lot easier to do only three. They are not web pages ready. A few models. Those of us who have done web design for a period of time (12 years in my case) build pages the finished with slices of image we have exported from Fireworks in Dreamweaver. Fireworks was never intended to be used as a WYSIWYG editor. In my view, it is moving in that direction, but has a way to go yet. Do yourself a favor and learn how to use Dreamweaver as your homebase for Web development.

• My 'friend' stole my phone! Looking for advice please...

  I lost my iPhone there are coming from about 4 weeks after my vacation.  I assumed that I had lost all the unpacking.  I went on icloud and tried to find my iphone, but it had extinguished.  Today, I got an email saying «sound was played on your iphone» "So I'll in icloud, find my iphone and the compass of boots, and there is the point and green on my friend house '". "  They renamed as their own phone, but all my contact information, phone numbers, pictures etc. are still there.   Funny it was, earlier, before I got this email, my friend actually asked me if I wanted to buy an iphone and showed me my own phone!  (didn't know that at the time it was my phone) Who needs enemies huh?  In any case, I just want my phone back, without being mean to my friend (who will then be an ex friend once I pick up my phone).  Do not call the police or something like that, don't want to let know them I know, don't want to erase phone or activate the lost mode.  Really confused what course of action to take. You'll feel so betrayed. I buy my own phone of this horrible person.  Can I change the password via icloud?  (yes they knew my password!).  Can I change the language of the phone and mess with them?  How they have enabled it anyway, I tried ringing but the call wouldn't happen, is that this means they put a new SIM card in, and my info stored in memory?  I tried Googling some of these issues, not vain, alas.  You'll feel so devoid of meaning.  Advice or answers very welcome...

  I suggest you to contact the local police and proceed from there. This isn't a 'friend', and I would put the unit lost Mode. They were willing to sell you the phone. How do have to go before you're ready to contact the police, or lock the phone?

• In FF 7.0.1 the new tab on the band on tabs disappeared after clicking on the icon of the tab group button and try to return, I'm looking for advice on how to get the new tab to reappear on the Strip to tabs.

  In Windows Vista, FF 7.0.1 I've selected the button tab group to try out it. However, when I chose the button group of tabs to close this point of view, the button tab in the strip of the tab no longer appears. I'm a request for assistance to restore the button new tab (the sign '+' on the subject) on the tabs to the right of the tabs open tape.

  You can find the button new tab showing as a '+' on the tab bar.

  You can open the window customize and drag the button new tab that indicates that a sign plus bar tabs on another toolbar and it will become a regular tools like the new button bar button tab you have in versions of Firefox 3.
  
  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  If you can not find the new button tab then click the button 'Restore Default Set' in the window customize.

  If you would like the button tab at the right end of the tab bar, then place a flexible space to the left of it.

• Looking for advice on navigation in the TestStand API.

  I use TestStand for a few months now (self-taught using a LV architect with experience of the TS) and I think I will do certain things programmatically at run time and finished watching the massive array of properties/methods, etc. and ask yourself who are the properties/methods that will allow me to do what I have in mind.  Is there something fundamental missing in learning to understand which path to take to get down to the specific class and property/method interests me?

  For example, at the moment I am trigger some additional operations on the process model in addition to running the main client generated when you enter Test DUT. I would like to be able to programmatically from within TS itself, or more probably of LabVIEW or hide these tabs when running... I guess it's possible.  I know that executions can be set initially hidden but a search for 20 minutes of the API not immediately revealed magical items to let me do this programmatically.

  Hey, smoke,

  The ApplicationMgr TestStand is located within the TestStand UI control server. To access the Application Manager, you first need to action a step ActiveX (because it is an ActiveX control) and RunState.Engine.GetInteralOption (InternalOption_ApplicationManager), you get a Manager Application object.

  Example:

  "Select the Module tab then under Automation server" NI TestStand XXXX UI controls (Ver X.X)

  The object reference"RunState.Engine.GetInteralOption (InternalOption_ApplicationManager)

  Class object' ApplicationMgr (IApplicationMgr)

  Get the property executions

  Which returns an object reference and class performances, thus, create a variable(Local,FileGlobal,etc) of object reference to use to retrieve the properties of the Application Manager.

  Also note that to get the individual properties of your Application Manager object you won't be ActiveX measures for the properties you want.

  I hope this helps.

• Looking for advice on how to use math Input Panel?

  I bought a Wacom Create Tablet for use with generation of mathematical equations. The problem is he doesn't know how I got all my equations.  Cape Sigma introduce you to 3, etc., 2 as a symbol of the partial derivatives etc.

  Yet, I have an input value of the quadratic equation.
  Harry Smith

  Hello

  I suggest you to contact Wacom support about the issue.

  http://www.Wacom.com/en/company/contact.aspx

• I'm looking for advice on Adobe CC subscriptions

  I already have a version of Adobe Illustrator, Photoshop and InDesign CS, but seeks to obtain the most recent version of them. Can I get a discount because it is technically an upgrade and are there other options to purchase between one application and all the apps? All applications seems a bit excessive for what I need

  .

  I am Freelancer, so would just to install this on 2 computers.

  Thank you

  There was a first year discount creative cloud for owners of CS3 - 6 for the first years, but it expired in may 2015. Please see:

  General conditions | Adobe

  If you decide to purchase a subscription to creative cloud, you can install it and connect you on two computers.

  FAQ: Can I install Creative Cloud on several computers?