Satellite Pro C870 - 1FL PSCBBE - not more than Bluetooth after upgrade to SSD

Similar Questions

• PSC 2510i AIO: NOT more than scan after upgrade to Snow Leopard

  Hello

  After upgrading to Snow Leopard, I can't find my scan feature.

  I tried to different paths:

  1. install such as proposed through the Apple software update: no scanner not found, printing is working A-OK

  2. install HP_Installer_PSC2500_v9.7.dmg: does not work, gives errors.

  Removed all and re-installed the Apple / drivers HP through software update

  I've tested the HW, works fine, can sweep on the machine itself, but it is not a solution.

  I am enough fan of this machine, 100% over the years in the home network.

  Does anyone have a suggestion?

  Appreciate your help :-)

  Thank you!

  Hey the HP team.

  Just got an update of the printer HP by Apple and yes I can see the PSC2510i
  And Scan.

  It crashed a few times, but I guess that the reports will reach the development team.

  I am happy!
  I can disconnect and stop the Windows laptop...

  AND!  not even an additional feature!

  Multiples of scanning.
  It distinguises different objects, makes life much easier.

  Thanks again

  MacBurdy

• Satellite Pro A100-080 does not start - stays dark after 3 beeps

  Hello
  After a week off, the Toshiba Satellite Pro A100-080 (PSAASE-00G004GR, 4 GB RAM) of my kids start not anymore.
  When turn on/off the system, he * will beep 3 times * (one long, two short beeps), the HDisk light flashes 'blue' and then nothing more. A/c and battery power LED are 'blue', which seem to be OK status.
  No other useful help, as the screen remains dark.

  We had upgraded to 4 GB MEM (Kingston) a year ago and I already tried the old used 1 GB (included with purchase) or the replacement of 2 x 1 GB since December 2007, but equal status with these modules. This is not
  a defect of memory.

  I hope that this is not the motherboard, probably only the NVIDIA GeForce Go 7600 graphics included adapter?
  Does anyone have an idea what could be the problem?

  Thx for a short help.

  Hello

  Generally this type of beep codes are hardware related or with other words, hardware is defective. So I think it's a hardware problem and an ASP must check your laptop computer to identify the cause of this.

  On the Toshiba site, you will find a list of aspic:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite Pro L300-1FL - WLAN network adapter does not exist

  Model: Satellite Pro L300-1FL (PSLB9E)
  Operating system: XP Pro SP2
  Wireless card: PA3616u-1mpc (atheros AR5007)

  the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

  Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

  at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

  forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

  I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

  When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

  any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

  Thank you

  ~ andy

  worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

  the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

  This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

  someone at - it had a similar problem? is it just a matter of finding the "correct" driver

  Thank you

  ~ a

• Satellite Pro C870-1E2 - internet connection problem Proxy Server not responding

  My old Toshiba computer connects to the internet via a numbered port,
  yet my new Toshiba Satellite Pro C870 1E2 connects to the internet through a proxy server.

  Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  When I tried the old computer connected instantly he had to wait a long period of time before that the "proxy" got it's act together.

  Advice please?

  > Why I ask because this morning when I started, I was unable to connect to the internet and all that appeared on the screen was the message "Proxy Server not responding."

  And why you think you ve you have a problem with the Satellite laptop? I understand the original message: the Satellite acts as client.
  In my eyes there is a problem with the proxy server, and this should be checked first.
  Its almost impossible to tell which could affect the proxy, but as a first step, a reboot would be desirable.

• Satellite Pro C870 Windows 10 is supported

  Hello
  I have icons on MS that make upgrading my WIN7 for WIN10 free of charge.

  My Satellite Pro C870 or not FULL compatibility on WIN10?
  Thank you
  Giovanni

  Satellite Pro C870 isn't in the Toshiba models supported for upgrading to Windows 10 Web site.
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  This means that this model of laptop won't get Windows 10 drivers and software, but of course the Windows 10 installation is possible

• Black screen on Satellite Pro C870-1CJ

  Good night

  I have a portable Satellite PRO 1CJ C870. A few days ago I got a blue screen showing display problems and since then, the laptop screen is black and there is no picture shown in it. I am entered mode secure and tried to connect it to a VGA monitor with success.
  As I guess it was a problem with the graphics card then in the blue screen message, he made atikmgpag.sys that I tried to install the latest version of the graphics driver t but no news on the laptop screen.
  I also tried Toshiba Tempro, which has not had the success also. I have tried several things without result.

  Can anyone help me to solve the problem? I'm a bit desperate.

  Thank you

  Gabriel

  As far as I know your laptop Satellite Pro C870-1CJ was equipped with two graphics cards:

  1 - internal Intel Graphics HD 4000, which is part of the Intel CPU
  2 external ATI Radeon HD M 7610

  The error that contains information about the atikmgpag.sys file seems to be related to the ATI graphics card driver.

  I'm not sure, but it might be possible that the graphics chip from ATI external began to malfunction.

  Anyway, if possible, try to retrieve the laptop as mentioned by Liam
  If this is not possible, the material may be affected and it could be costly to repair.

• Satellite Pro S300 EZ1514 - could not initialize Solid State Drive (SSD)

  I have a Satellite Pro S300 EZ1514.

  Recently I bought a SATA II 64 GB SSD to replace hard drive current cavalry. I first tried to install XP with SATA drivers rationalized in.
  The installation process recognized the SSD and has the original file copied to it, but when it restarted to continue the installation process the system wouldn't boot from the drive.

  Then I tried to install Vista Business 64 from the recovery disk came with the laptop.
  After launching the recovery disc, the said installation process the hard drive has not been initialized and click OK to initialize now.
  After clicking OK to initialize the system not restarted that at the end pointing upwards on the screen telling me to initialize the hard disk.

  Then I tried initializing the disk manually on my desk.
  Plugged into my office, initialized and formatted in NTFS. Plugged into the laptop to retry recovery Vista. And once again the same screen appears. Reconnect the disk SSD the Office to see that the player has is more initialized and was to be initialized again.

  Then I gave up and installed the SSD on my desktop under master boot and installed perfectly fine with XP. For testing purposes I then handed the ssd with XP pre-installed in the cell to see what happens. To my dismay the computer laptop would not boot and on top of that when I put the SSD drive in the desktop only to see that the drive has been initialized is no longer and I had to reinstall XP again.

  Conclusion:
  It seems that the Satellite Pro S300 series is not easy SSD and just post it self off Initialise the Solid State Drives.
  This seems to be the logical conclusion that the SSDS works perfectly well on my desktop and the laptop is fine now with the old turntable hard back in.

  Does anyone else have this problem or a solution?
  I would still put the SSD in my laptop to save energy.

  Hello

  The laptop is equipped with common serial ATA HDD.
  The SSD might work, but is not a must.

  There are several different SSD on the market and a problem of compatibility of equipment can always happen.
  Maybe an other SSD would work properly, but these are just suggestions.

• Satellite Pro C870 - 19(d): Windows 10 - BT seems to have problems

  Hello

  our laptop Satellite Pro C870 - 19(d) works very well under Windows 8.1. Now the tool Advisor Windows 10 registration and upgrade has been installed automatically by Windows Update and it says that the two internal Bluetooth components of this laptop is not compatible with Windows 10.
  Currently, no driver updates Bluetooth is available via Windows update driver online or via Toshiba Service Station.

  Is there a update driver in the near future that ensures compatibility with Windows 10?

  Best regards, Hans-Georg

  Hi guys, the Windows 10 is not officially released by MS, and currently Windows 10 drivers are not available for all Toshiba laptops.
  I think you need to wait that Toshiba would start the support to win 10. I guess that this will happen after the official release of win 10.

• Satellite Pro C870 can run on the 5 GHz band?

  My laptop model Toshiba Satellite Pro C870 1E2 can run on the band 5 GHz with Windows 7 Pro 64 bit. Tried to ask this question to Toshiba, but it seems to be a technical problem it so impossible to transmit my question for them.

  Hello

  The frequency of Wlan depending on the WLan card.
  I think that the laptop was equipped with WLan RTL8723AE Realtek card that supports the 802.11 standard B / G / N standard

  5 GHz is only available using 802.11 A or N

  802.11 N standard works on 2.4 Ghz and 5 GHz but 5 GHz is available ONLY if the WLan card would support additional one 802.11 standard; That is to say 802.11 A / N.

  But Realtek RTL8723AE doesn t support 802.11 has and therefore the 5 GHz are not possible for this WLan module.

  Here's a similar thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64003

• Re: Satellite Pro C870 - Blue Ray player driver downloaded through Tempro

  Hello

  I have a Satellite Pro C870-10F Windows 7 Professional 64-bit with Tempro me a well-informed driver I could install (a Blue Ray player driver). TEMPRO should be reliable... but first of all my Panda antivirus disabled the script installation, and when I disabled the antivirus protection, I ran again the installation of this driver and that he got an error on a file missing. I was not able to proceed with the installation at all.
  someone at - it had the same problem?

  The cause would be that I installed VLC Media Player?
  Thanks for your help.

  Last days, few people have reported on this notification Tempro. According to the specifications of the laptop your laptop doesn t have Blue Ray optical disc player, so I think that this update of the driver is not important to you.

• I'm doing a pdf to a file and I need to get the size of the file to be not more than 10 MB. What is the best way to do

  I'm doing a pdf to a file and I need to get the size of the file to be not more than 10 MB. Even when I save it, the image quality at least the file size is 10.9 MB. What is the best way to do

  Open the PDF in Acrobat Pro. Choose file > save as other > PDF of reduced size or PDF optimized (which gives you more options).

• Satellite Pro C870 - Internet connection fails after a fashion 'sleep'

  SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1

  Hello

  My problem:
  I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.

  Can you help me?

  Thank you.

  This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?

  In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.

  You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.

• Satellite Pro C870 - Win8.1 update - error 0xC1900101 - 0 x 30018

  Hello there,

  for seven days, I try to update my system to WIN8.1. on the first try, I get the 0xc1900101 - 0 x 30018 errorcod.
  I already did a reinstall of WIN8 and uninstalled everything except the networkdriver. Allways get the same message. The installation seems to work fine until deviceconfiguration 64%. Then it restarts and redefines WIN8.
  My system is Satellite Pro C870 1EJ
  Need some help, or better a solution.

  THX

  verzweiflix

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014

  Search in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74631

  Next to the workaround solution posted by harrie_1, you can try to solve the problem of updating through the stages which are:

  Uninstalling AV and firewall disabling
  Go Wi - Fi usage for a thread using a network cable
  Remove AVG
  SFC scan
  Disable Wi - Fi
  Update the BIOS
  Remove additional USB devices

  Welcome them

• Re: Satellite Pro C870 - No Wireless, code 43 error

  Have two new Satellite Pro C870 where the wireless has been disabled at the start of the second. NETWORK card wireless in the Device Manager has an exclamation point and showed "Windows has stopped this device because it has reported problems. (Code 43) »

  After you perform a restore of the system, as indicated by the support, the question was always there.

  Just before sending the two laptops off the coast for repairs I undid a parameter called "quick start" in the bios (otherwise defined by using a utility from Toshiba).

  Issue seems to have erased after that.

  Is everything OK?
  If this isn't the case, I recommend you to reinstall the OS using HARD drive recovery facility. After that this laptop will again have factory settings and everything should be OK again.