Looking to replace a RAID in older (UCS-61) with a new (UCP-51) Perc 5i controller on a PowerEdge r610 server...

Similar Questions

• I replace a website done previously before Page with a new site that I built in Dreamweaver, but wants to keep the URL address, what is the best way to achieve this?

  I replace a site is at the top with a new website that I'm building in Dreamweaver, but want to keep the same URL which is the best way to go about this?

  If you want to keep the same hosting provider, you have nothing to do. Just delete the old files of the site and download your new.

• How to replace an existing site of the MUSE with a new version?

  I'm working on a complete overhaul of my site from MUSE.

  I don't want to take down the current until the new version is ready...

  I have to delete the current version and then restart a new?

  The site is hosted by Business Catalyst.

  Please notify.

  R Muir

  Hello

  You can publish the new site as the catalyst for business trial. Once the site is ready to be powered, you can republish it to your existing URL via Muse itself.

  This will replace the current live site.

  In case you do not want to delete the current site online, you will need to remove the domain from the current site and add it to this site has been published.

  The previous version will be accessible by business catalyst URL.

  Kind regards

  Neha

• Hi, I am looking to replace my battery. I have a MacBook Pro (13-inch mid 2009) and the battery is dead. How can I get a new one? Thank you.

  Hello

  I'm looking to replace my battery.

  I have a MacBook Pro

  Specs below:

  (13-inch mid 2009)

  Processor 2.53 GHz Intel Core 2 Duo

  Memory 8 GB 1333 MHz DDR3

  Graphics  NVIDIA GeForce 9400 M 256 MB

  Software  OS X 10.9.5 (13F1911)

  Built-in display: 13 inch (1280 x 800), NVIDIA GeForce 9400 M 256 MB graphics card

  Big problem is that my battery is dead.

  (1) what is the best battery you could recommend.

  (2) where I can source for this battery.

  Thanks - Nairobi - Kenya - currently in Zambia

  Your best option take it into an Apple store. And get it replaced.

  Alternatively, you can buy one here https://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Uni

• Linux 32-bit. Abobe plug-in already installed. Always get looks like to your using an older version of Firefox. All talk of 64, I'm Linux 32. Need 2 plug-ins?

  For a long time keep saying looks like to your using an older version of Firefox. Several times I tried to install Adobe Flash plug-in, both with Firefox and the Adobe site. I'm on Linux 32-bit, 64 no, details, that I find are for 64 bit.
  https://support.Mozilla.org/en-us/questions/759565
  I think that the problem might be here, but I do not see the solution for 32 bit. Looks like only maybe 2 plug-ins? Anyway I need help.
  It is a problem with all the extra steps with the question you can imagine. I tried from scratch with Firefox, not working, more like 52 card pick up... if you know this game.
  I want a solution if you have a. Thank you.

  I had the problem solved. Thank you for your help. I had to get help from an engineer, I know. It's fast enough, but it looked like he deleted the old and installed the new and it seemed that perhaps the launch could have the issue? Not exactly, it's almost as if the launch was set for the old version... but don't want to send someone on the cause of the bad way, I don't know, but he later installed to firefox 38.1 or another... the 29. SOLVED. Thank you for taking the time to help. It was frustrating problem.

• Looking to replace my MacBookPro battery.

  I'm looking to replace the battery of my MacBookPro, but I'm not sure how to find the right one.

  (my warranty is no longer viable)

  On the profile for mac:

  MacBook Pro (13-inch, mid 2009)

  Processor: 2.53 GHz Intel Core 2 Duo

  Serial No.: W8 * 66f

  Sorry if I posted this wrong, I just made this account.

  < personal information under the direction of the host >

  I asked guests to change your serial number, not the news you want to share in a forum open.

  OWC is a good choice for wquality battery quality://eshop.macsales.com/item/NewerTech/BAP13MBU65V/

  Your is easy to change , https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2009+Battery+Replac / 1332

• Legacy with defective power supply unit. Looking for replacement source

  RND4000 (ReadyNAS NV + v1 [v3]) group legacy with a power failure. Looking for replacement source. Not after replacement free of charge since it is obviously out of warranty and end of product life. However, it is a little expensive Kit to replace. If I did, I would still want to use it as a backup of synchronization for the new.

  I was unable to find any power supply corresponding by the name given to the unit (ST-220FUB-05F), all the results of my research resulted in a power different with smilar looks and namesake. Main differences are slight changes in the output rails, different output connectors. Also include a fan that mine didn't, perhaps a clue to the failure there.

  I was shocked to find that he was / is none replaceable fuse in the power supply and if there was a gauge commonent that he was unable to do the job because a cracket big mosfet to clean his radiator, think that's what it is, hard to see in here. Unable to find a replacement, I'll have to try to replace the component that is visibly damaged. Not easy because it's crowded in there and may fail because there are perhaps other failing components that didn't explode or evacuate. I really need ot get this unit backup and running.

  Help, please. Consider the purchase of an equivalent of second hand RND4000 for parts. See you soon.

  Hello EkDor,

  This replacement of power supply was free until supplies last and I heard they already ran out of it.

• raid question 6 UCS 210

  Hi all

  We have a UCS 210 with a LSI MegaRAID 9261 - 8i 6G card.  There also have 4x146GB 6 GB SAS 15 K RPM HDD SFF.  It is configured with raid 6 with all 4 HDD in the virtual HD group.  It seems he gives me about 278 GB.  about half 4 x 146.  does that make sense for raid 6?

  We have an another c220 with with raid 5 gives approximately 1.4 to 6x300HD.  (more than half).  RAID 5 is almost identical to raid 6 and gives less than raid 5 in size.  This is why it makes no sense for ucs210 with disk HARD 4 x 146.

  If anyone can clarify this?

  very much appreciated.

  Thank you

  Vijay

  Hi Vsaravanamuthu,

  The values you get are expected, what you need to know is that for raid 5 you have a failure of the SINGLE player for the fault tolerance and RAID 6, you have TWO disks for fault tolerance. It would make sense that you see more large capacity of raid 5 to raid 6.   You can also find calculators of raid online that will give you and idea of the expected capacity of the raid volume (see below).

  RAID calculator

  http://wintelguy.com/raidcalc.pl

  I would like to know if this helps and don't forget to note the answers useful.

• Motherboard Ethernet does not. Looking to replace.

  Hello

  I bought a HP Pavilion a6645f Desktop 2 years and Ethernet on the motherboard just stopped working... I'm looking to replace it with a GIGABYTE GA-MA785GM-US2H. IM curious to know if it is even possible to replace a motherboard on this computer? If not why?

  Hello

  If you buy a new MB only for the integrated network controller, I don't think it's a good deal.

  You can get a PCI network card can be installed into the a6645f PCI connector and connect the network cable to access the Internet / other computers on the network. You can find same network cards for $20 in the Local computer Showrooms.

  Furthermore, Yes, you can upgrade MB on your PC, you must ensure that the new motherboard has almost the same internal components to start directly from the HARD disk (without reinstalling OS on the new MB)

  http://support.HP.com/us-en/document/c01599689

• How can I remove a hard disk to the raid set default and replace it with a new one

  Last Friday apparently began one of my raid drives failing.

  As I said on this forum I started having continuous beep.

  I was finally able to get the raid works at a degraded level.  I ordered a replacement hard drive, that happened today.

  (In the meantime, I made twice daily backups of my work...)

  Below is the message that I have the raid of browser-based software:

  Blahblah 09 1000,2 GB RaidSet Member SamSung HD103SJ

  Blahblah 10 GB 1000,2 free SamSung HD103SJ

  Blahblah 11 1000,2 GB RaidSet Member SamSung HD103SJ

  Blahblah 12 GB 1000,2 RaidSet Member SamSung HD103SJ

  (See this thread sooner if you wish!)

  http://forums.Adobe.com/thread/727867?TSTART=0

  
  At any given time when I did the checked the browser interface, I have seen the message failed and degraded

  As I said, I was able to work this weekend on the degraded system.

  This morning I had the new tone and made the rescue and now I use a "full raid" without the advice that a raid was 'free '.

  In all cases, the new drive arrived today.

  Should what precautions I take to integrate the new drive in the raid system.

  I have an OS disk

  and raid 4 TB drives.   One needs to be replaced with the new one I get today.

  Thank you

  Rowby

  Rowby,

  You currently have your background priority set to 20% IIRC, so it will take time to rebuild, but probably a lot less than 24 hours as for new construction. Even with 20% defined, I guess that it will be done in less than 12 hours, but you can set the background priority to 50% and it will be much faster at the expense of access to your raid. Reconstruction of the background is designed to give you access to all your data files and to continue the work, while the data is being rebuilt. You can continue your work, so if it takes 8 or 12 hours to find the full data intergrity isn't all that relevant. Your aura a functional slower than with a raid reaction complete, but has more speed than a single disk.

• TS140 RAID 100 controller listed do not as a controller of storage in Windows Server R2 2012

  Establishing a new TS140. Installed SSD as drive. Installed Windows Server 2012 R2 Essentials Software, no UEFI strives. As a second drive, installed a 500 GB HARD drive. Everything is OK.

  Installed 2-4 TB HDDs. Windows can see the disks. Rebooted and went to set up the RAID volume. Made sure the CSM has been activated. To restart the server, has encountered an error. I removed the RAID volume and reset to SATA RAID not.

  I then looked in Windows features and I saw that the only listed storage controller is the variety of Windows one spaces. I think that's the problem.

  Once installed Win2K, how can I add the RAID 100 as a storage controller?

  Thank you

  John

  Problem solved. I'd missed initially 'Load the Driver' stage when selecting an installation location, after selecting the l; apartment, I clicked on "Load driver" ther, but which did not load the driver. Reinstalled Windows successfully.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• Replace the hard drive of 500 GB with 256GB SSD in spectrum XT Touchsmart

  I tried to replace the HARD drive of 500 GB with 256 GB Samsung SSD and then began to install it using the external DVD drive, but during installation without disk hard were found. What I have to disable certain BIOS settings or I need to install the SSD in a separate location. Any kind of help is greatly appreciated.

  Yupp, I could install an SSD. You need to install the drivers for RAID Intel® Rapid Storage Technology (Intel® RST) driver (https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+ (Intel % C2% AE + RST) & lang = fre) during the installation of Windows 8. I extracted the drivers for USB and everything by choosing which device to install windows 8 installed drivers.

  After that, the SSD has been detected and the simple installation procedure. I pasted the link for the driver, don't know whether or not it will get removed. In case it is removed just search driver RAID Intel® Rapid Storage Technology (Intel® RST).

• Help needed with two new HHD to RAID 1 PERC 6 / i integrated controller

  We have a client that has an out of warranty PowerEdge T610. On the Dell OpenManage Server Admin, I can see that he can see my 1 RAID PERC 6 / i integrated controller. On one of the controllers, we have a RAID 5 that has 4 discs dedicated to a data store (drive D), we two discs devoted to the Windows SBS 2008 (drive C) operating system on RAID 1.

  When we look at the server, I have physical disks located in:

  Our drive D data store:

  • 0:0:0
  • 0:0:1
  • 0:0:2
  • 0:0:3

  Our reader C found in:

  • 1:0:4
  • 1:0:5

  We just added two new hard drives for RAID 1 based on the conversation we had with Dell, they recommended that we can try from C data to the new larger disks. When to Dell Open Manage looking at the physical disks on the PERC 6 controller / i integrated, I can see that it has detected two new 500 GB SATA drives that the client installed. However the tasks available do not allow me nor their format to use as they appear in the management of the computer as a disk that is available for use. Is there something that we are completely absent here?

  Regarding the new disks located here:

  • 1:0:6
  • 1:0:7

  My options for available tasks are the following:

  • Blink
  • Unblink
  • Assign Global relief
  • Claire...

  I already have them deleted once as I didn't know if they should be formatted to be recognized, but in the computer management disk management they don't even appear at all. I thought that I had a task of 'on-line' that I could assign to the readers so maybe they appear to start to use the new storage HHD.

  With regard to the current firmware for the controller.

  • Firmware version: 6.2.0 - 0013
  • Driver version: 2.24.00.64
  • The Storport driver version: 6.0.6002.18005

  I have attached a PDF file to this post to view details on the disks. Sorry for the fine print, but it's a PDF so you should be able to zoom. Any assistance about why readers as not detected in disk management would be absolutely awesome. :)

  -Digity

  PERC does not support non RAID... you can just throw the discs and use them. You'll need to set up and initialize a new RAID array with the readers. It is not a task of "physical disk", therefore in OMSA, go to the page of the virtual disks and click the new link Wizard of VD at the top of the page to create a new VD of the BONE.

• Working with the new Premiere Pro 2015 CC older plugin packages

  Older plugin with the new first CC 2015 packages

  I'm under first CC 2014 with older versions of several packages of plugin like BCC7/8 and Boris FX Continuum. It is my understanding that these old plugins do not work and will not be migrated when you install the first CC 2015. Does anyone have any experience with this situation?

  Also, is there a way to keep the first CC 2014 on my system intact while updating for first CC 2015? At this time the new 2015 CC replaces the current software residing on the system.

  Thank you
  Nick Delfino

  If you click on Advanced Options before installing 2015, you have the possibility to leave the old installed versions.