Help needed with two new HHD to RAID 1 PERC 6 / i integrated controller

Similar Questions

• Help please with two extremes and DNS

  Hello

  I hope someone can help.

  My setup

  Modem-router ADSL with WiFi turned off >

  Airport extreme connected by ethernet to the Modem/Router - create a wireless network, a static IP - Bridge Mode - >

  Airport extreme connected by ethernet to the Airport extreme - create a wireless - Mode Bridge >-static IP address

  Both now have the status message - "no DNS - this Airport base station does´t server have a DNS server address and could have problems connecting to the Internet."  If the airport is in Bridge Mode is necessary enter the DNS server (no shows at what time the DHCP value)? I should give him the address of the modem/router or real DNS I see in my modem/router settings?

  Also the WiFi mode extend a wireless network is only fair for multiple extremes that extend wireless (No ethernet cable)?

  Thank you

  Turning off the modem/router

  Power off each AirPort Extreme

  Wait a minute

  Turn on the modem/router and let it run for a minute

  Put on single AirPort Extreme and check its status

  If the first AirPort Extreme looks good, the second turns on and check its status

  Report on the results

  If you're still having problems...

  The two extremes of the airport are working properly in the past... and this problem appeared just... or... is that what you are having trouble with a new configuration?

  When you say that every AirPort Extreme has a static IP address, this means that each AirPort Extreme has been configured to request a specific IP address... or... does that mean that you have configured your modem/router to provide a specific IP address for each AirPort Extreme?

  If you check the settings for each AirPort Extreme... each of them receives the static IP address that the router/modem is the assignment?

• Can someone help me with two questions regarding my PowerShot SX540HS?

  I'm generally pretty tech savy, but I'm having problems with two very basic functions on my PowerShot SX540HS.  I downloaded the complete operating manual and followed the instructions to the two questions, but I am unable to answer these questions after a lot of testing with the camera settings.

  1. is it possible to force the flash to the position, but keep any AUTO value? (I need an additional light on the African-American faces when shooting outdoors).  The manual States that there should be a setting IT for flash, but all I see is auto flash or disabled.  I don't see a setting IT allows me to force the flash fires.

  2. I need help with how to set up the camera to focus on how to features of landscapes in the background (such as a mountain range) instead of focus on something more about that appears in the frame, perhaps some leaves from a nearby tree.  When I tried testing the manual focus by following the instructions in the manual and set the focus to infinity, ISO camera settings went haywire and I got a completely overexposed photo.

  I'd appreciate any help.  I thank you very much.

  Your welcome!

  The brightness problem is your camera set to have the i-contrast on Auto? If this is not the case, try this to fix the bightness of images that you have taken or will take.

  You can of course put the ISO and shutter speed manually too in P mode for pictures where I contrast does not work well for you.

  P mode is basically the Auto mode, but it allows you to make changes where you want.

• Extend the current TMS Cluster with two new server

  Hello

  We currently have a cluster of two TMS-Server (13.2.1) installed on a W2K3 Server with a database on a SQL-Server separat

  To have a smooth migration, we thought the following procedure.

  Addition of two new server with W2K8 R2 by installing a TMS 13.2.1 to the cluster with access to the same database.

  After a while remove the two old server and upgrade to TMS14 (updated TMSPE in advance).

  Unfortunately, we get the message, as seen in the PNG-attachment during the installation of the first server in new.

  Anyone know if we could proceed as described above?

  Is the message because of the different operating system. If I click on 'Yes' former TMS-server still works?

  Thank you

  Concerning

  Ingo

  Hello

  The error message is misleading and can be safely ignored, and you can continue with the installation of the new TMS nodes. It was deleted in 14.0 TMS, see bug CSCui34702.

  Kind regards

  Kjetil

• Once more, help needed with DW5

  Can someone help me with how to change the size of the font on a page using DW5 without first having to learn CSS? I asked this once before, and nobody would just show me what to put the required fields, so I can get with my Web page creation. Clarification, what I do is post pictures to a photo album online - I'm not a Web Designer or graphic designer, so I don't mean to be a great webmaster or anything like that. And I simply don't have the time to study the CSS - I'm already late in my studies unrelated to school and I spend time with my wife and my children. I-don't-have-the-time-to-learn-CSS.

  -Whenever I go to change the font size in the menu properties at the bottom of the page, place appears a window CSS asking me to enter all kinds of information - none that I am familiar with. Is there something I can fill in these areas so that I can change the font size and go with my photo album? I appreciate it.

  Not to worry. On the right side, in your CSS panel, you should see the class. Click it, and then click the pencil at the bottom of the Panel icon to change the rules. Define how you want, and then follow the last step to apply it.

• RESOLVED: Loop of reboot after installing new disks in RAID of PERC S100

  A customer has a Dell T110 (with a PERC S100 RAID controller) running Windows 2008 R2. The system has two disks: a reader not RAID (C :) running the operating system and a RAID1 drive (E :) sharing data with network folders.) We need to install again, larger disks for the RAID.

  I thought I could backup the data on the RAID drive existing (e), install new disks, built a new table in the S100 (VDM) virtual disk boot manager, boot into the operating system, create the new partition for the data replaced E: drive and copy the data back. This was not the case. After installing the new disks and the new array of construction (which is reported as "READY (R/W)" when starting, Windows starts all the way in "press CTRL-ALT-DEL to log". After two or three seconds, the system reboots. The same thing happens when I try to start safe mode. The system IS NOT automatically booted to the Recovery Console. He never seems to know that an error occurred and the system was not shut down normally.

  I booted into the Recovery Console, installed the drivers for the PERC S100 and run recovery to start without success. Also in the Recovery Console, I ran 'chkdsk /f E:\. ' (remarkably, the drive letter for the data drive remained the same), and no error has been reported. I also reinstalled drivers S100 of the recovery using DISM Console, but that changed nothing.

  I started to 8.1 Windows PE, installed drivers S100, formatted the virtual disk, copied the data which he, and everything works fine. The only problem is when I try to boot from the system drive (which has no problem) with the new installed disks.

  When I put the old records, the system boots normally with no reconfiguration required. The VDM to start automatically remembers the discs and the table. Nothing shows up in the logs event indicating that there was an error during startup. (Ntbtlog.txt) start-up newspaper, after several boots with the new drives in place, indicates that the system restarts at various times during loading drivers. There is nothing coherent in the startup log to indicate what the problem is.

  The only clue I have is that, during the startup, the VDM reports the virtual drive of origin as 'NORMAL (R/W)' and the new virtual disk as "READY (R/W)", but I'm not sure of the significance of this difference or if it suggests a solution.

  I can't find clues in all the newspapers about what may be the problem. If anyone has any suggestions, I will be grateful. I'll be especially grateful for the wacky suggestions.

  I ran it. Nothing appeared unusual. However, I does not solve the problem.

  I connect the new readers to the same SATA ports as the old records. When I connect one of them to the SATA port that had not been used as part of the original painting, the VDM S100 reported the original failed array, because readers were is more connected and showed the new table as a LOAN. The operating system then started normally.

  The trick, it seems that you should remove the old virtual disk before connecting the new disks on the same ports.

• More help needed with generic - or is - this reflection?

  This is a thread of follow-up to Re: need help with generics, I think... in which I ask for help a table abstract data model which itself contains an abstract objects row vector. (This book that happens because I have several table models, which are all very similar, and so I'm abstraction of common characteristics). Answering the question of this thread has been plenty in there, but now I have another.
  
  One such characteristic is a method that I called createMinRows. Many of my tables use blank lines to "fill in" any space which is not taken by rows with real data, so that the area of the scrolling pane is filled with the table grid. It is purely aesthetic. I have a field of AbstractModel, MIN_ROWS, whose value is set by the constructors of subclasses of AbstractModel. Manufacturers then call createMinRows() to get the necessary number of 'dummy lines' created in the model. This method, of course, must be in AbstractModel. And there is the problem: inside the AbstractModel, we do not know what AbstractRow subclass should be instantiated.
  
  Here's the code in SSCNE (...) Not compilable...) format:

  import java.util.Vector;
  import javax.swing.*;
  
  abstract class AbstractRow
  {
    protected String field1;
    protected String field2;
  }
  class MyRow extends AbstractRow
  {
    private String field3;
  }
  abstract class AbstractModel<T extends AbstractRow>
  {
    protected Vector<T> rows = new Vector<T>();
    protected int MIN_ROWS;
    protected void createMinRows()
    {
      for (int i = 0; i < MIN_ROWS; i++)
      {
        rows.add(new MyRow());  // this line doesn't compile
      }
    }
  }
  class MyModel extends AbstractModel<MyRow>
  {
    MyModel()
    {
      MIN_ROWS = 10;
      createMinRows();
    }
  }
  public class MakeAbstractRowWork extends JPanel
  {
    public static void main(String[] args)
    {
      javax.swing.SwingUtilities.invokeLater(new Runnable()
      {
        public void run()
        {
          JFrame frame = new JFrame("MakeAbstractRowWork");
          MakeAbstractRowWork pane = new MakeAbstractRowWork();
          pane.setOpaque(true);
          frame.setContentPane(pane);
          frame.setVisible(true);
        }
      });
    }
  }

  I guess I have to pass the class with createMinRows()? This would reflect, right? Is it possible to achieve what I need without thinking - I love Java verification type and everything seems to go when thinking puts his head in the door.

  I'd go with an abstract method that you call in your loop:

  abstract class AbstractModel {
    protected abstract T createEmptyRow();
  }
  

• Help needed with camera loading LUT

  Hi all

  I'm trying to load a LUT created in Sony RAW Viewer in the F65 camera.

  I tried to use a memory stick and SD card but when I go to the file - LUT - menu import I don't see not all the files to select and when I click Import I get the error "Failed to load" - which is logical because it cannot see all of the files to import.

  I formatted the two cards in camera and put the files in which, according to me, are in the right places:

  The SD card:

  Private/Sony/Pro/Camera/F65/test1. Ltd

  For the Memory Stick:

  MSSONY/Pro/Camera/F65/test1. Ltd

  The version of camera system is on V2.2 and I use the Sony RAW Viewer software V1.1.0.06070

  When I export the RAW Viewer software Ltd. file I use the option "save under" in the control panel settings section and I save the file as type "Caméra LUT" with the model being F65, Type = READ and the media value correctly either MS or SD.

  Really appreciate any help to get this course as the camera that Luts are necessary for a meeting Monday.

  See you soon

  Hugh

  Hello

  Are you sure, is it possible in the 2.20 version?

  Kriss

• Help please with the new installation of windows 7 with internet

  We have two laptops, both using Windows 7 and a hub BT wireless, everything works fine, until I decided to reinstall windows. Now, with this computer, I just haven't been able to connect to the internet, even if the other laptop works very well. I'm no computer whizz and so enjoy really simple instructions on how I can connect to our BT Hub (internet).

  You will need to install your wireless adapter and Ethernet driver.

  Visit the Web site of the manufacturer for your laptop.

  Is which laptop brand and model?

• Help needed with CSS menu dropdown

  Hi guys,.

  I'm currently building a drop-down list for my site, but, despite seeing some tutorials and examples, I have had no luck yet!

  I'm sure that my HTML is correct...

  Code:

      <ul id="nav">
      <li><a href="#">Menu 1</a></li>
      <li><a href="#">Menu 2</a></li>
      <li><a href="#">Menu 3</a>
              <ul>
                  <li><a href="#">Drop Down 1</a></li>
                  <li><a href="#">Drop Down 2</a></li>
                  <li><a href="#">Drop Down 3</a></li>
                  <li><a href="#">Drop Down 4</a></li>
              </ul>
          </li>
      <li><a href="#">Menu 4</a></li>
      <li><a href="#">Menu 5</a></li>
      </ul>
  

  My CSS looks like this right now...

  Code:

  ul#nav {width:920px; height:35px; list-style:none; padding:0; margin:0; background:url(navBg.jpg) repeat-x; font-family:'OpenSansRegular'; font-size:11px; font-weight:700; text-transform:uppercase; -moz-box-shadow:0px 0px 10px #1c1c1c; -webkit-box-shadow:0px 0px 10px #1c1c1c; box-shadow:0px 0px 10px #1c1c1c; z-index:999;}
  ul#nav li a:hover, #nav li a:active {background:url(navOn.jpg) repeat-x; text-decoration:none;}
  ul#nav li a {border-right:1px solid #000; color:#E0E2E7; display:inline-block; float:left; margin:0; padding:10px 19px; width:auto; text-decoration:none;}
  
  * html #nav li {display:inline; float:left; }  /* for IE 6 */
  * + html #nav li {display:inline; float:left; }  /* for IE 7 */
  
  
  ul#nav li ul {left:-9999px; position:absolute; list-style:none;}
  ul#nav li:hover ul {left:0; position:absolute;}
  
  ul#nav li ul li {}
  ul#nav li ul li a {width:230px; background-color:#efefef; color:#2e2e2e; font-family:Arial, Helvetica, sans-serif; font-size:10px; font-weight:normal; border-bottom:solid 1px #FFF; padding:7px; margin:0;}
  ul#nav li ul li a:hover {background-color:#028efd; background-image:none; color:#FFF;}
  

  I am really struggling with this. Anyone know how I can get 3 Menu to display the drop-down list four items below - not the same width as the button Menu 3 but just online with it.

  Thank you very much and I hope to hear from you.

  SM

  Try this. It's been adapted from a menu that I've done on another site.

  #menu {width:920px; height:35px; padding:0; margin:0; background:url(navBg.jpg) repeat-x; -moz-box-shadow:0px 0px 10px #1c1c1c; -webkit-box-shadow:0px 0px 10px #1c1c1c; box-shadow:0px 0px 10px #1c1c1c;}
  ul#nav a {font: 700 11px 'OpenSansRegular', arial, helvetica, sans-serif; text-transform:uppercase; margin:0; padding:5px 15px; line-height:25px; color: #666; text-decoration: none; display:block; list-style: none;}
  ul#nav a:hover, ul#nav a.active {color: #999; background:url(navOn.jpg) repeat-x; text-decoration:none;}
  ul#nav {position: relative; margin: 0; padding: 0;}
  ul#nav ul {display: none;}
  * html #nav li {display:block; float:left; }  /* for IE 6 */
  * + html #nav li {display:block; float:left; }  /* for IE 7 */
  ul#nav li, ul#nav li li {position: relative; float: left; list-style: none; border-right:1px solid #000;}
  ul#nav li:hover ul {position: absolute; top: 35px; left: -1px; display:block; padding: 0; margin: 0;}
  ul#nav li li {width:230px; background-color:#efefef; color:#000;  font: normal 10px 'OpenSansRegular', arial, helvetica, sans-serif; border-bottom:solid 1px #FFF; border-right:none; border-left:1px solid #000; padding:0 5px;}
  ul#nav li li:hover, ul#nav li li a:hover {background-color:#028efd; color:#FFF;}
  

  
  
  
      
  Menu 1
      
  Menu 2
      
  Menu 3
              
  
                  
  Drop Down 1
                  
  Drop Down 2
                  
  Drop Down 3
                  
  Drop Down 4
              
          
      
  Menu 4
      
  Menu 5
      
      
  
  

• help with the new option of memories

  Sorry for my English

  Please help me with the new option of memories

  no memories option appears me

  I have an iphone with IOS 10.02 5

  Hello

  Try this support article > enjoy your memories in pictures - Apple Support

• I need it please, new serial number of a product for Fireworks CS4.

  Hi, I bought Fireworks CS4 years back, but now have a new computer and still want to use CS4. My online account does not appear the serial number now for all, and support here sent me with the help of an expert.

  Please help me with a new serial number for this product. Thank you very much.

  There is no option for a new serial number through these forums and Adobe customer support provides no support for older products.  Your only option to get the number of Adobe is to Adobe customer service.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  Find the serial number of your Adobe product quickly

  If you have the software installed on the older machine you can try to get through that serial number.

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

• With W - XP and a utility 6540dt, why it prints black (bakkup) with two LDTC wet ink?

  Someone out there:

  I'm under Windows XP and using a HP Deskjet 6540dt printer.  I removed two LDTC (ink cartridges) which indicated down and replace them with two new HP Inkjet LDTC and the printer indicates it will only print black ctg in backup modeusing.   This got me puzzzled.   I deleted the drivers and reinstalled from a CD disc (part No. C8963-10001) HP   after reinstall the drivers, the printer still prints with the onlyblack print cartridge.  I was super confused.

  I am running AVG free edition , and Microsoft Security Essentials and have even unintalled them then turing the driver for the Modem from Verizon to reintall the HP Deskjet 6500 series and still no luck I thought that the firewall can interfere with the installation.  He does not appear.

  What do you think is the problem?.    I have the installation disc at home MS W - XP original (not a recovery disk) and have all the dates of arrival and Service Pack (SP-3).

  I'll have to take the computer and printer to a repair (specialist) {no BestBuy or Geeks or Office Depot} man or can I fix it myself. ??   If I can fix it myself, you please give me instructions step by step IE: A: cela;  B: do;    etc.

  The specialist repairer should have renovated th ? printer

  Thanks in advance for your input

  Completely confused

  Hello

  I suggest you try the steps from the following link:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00219782&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=357211

  Additional information:
  Troubleshooting print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02046460&LC=en&cc=emea_middle_east&DLC=ar&product=357211

• Need help with a new SSD OCZ Agility 3

  I need assistance with my OCZ Vertex 3 60 GB SSD.

  I bought it yesterday because my current HARD drive is too slow.

  The problem is that I can't have my genuine version of Windows 7 Home Premium 64 - bit on it and I tried the system recovery DVD, I got from HP.

  Is my laptop: HP G62-b60SD

  Unfortunately my warranty has expired, so I hope someone could help me with this.

  In order to get my work of SSD, I just had to put an illegal version of 64-bit Windows 7 on it.

  But now I can't some functions to work, for example: disabling touchpad, brightness reduction etc.

  I have HP Support Assistant and assistant wireless network from several Web sites.

  How can I get my legal W7 Home Premium with the key functions of work in this regard?

  BTW, I use the SSD as my boot and the main driver and my old HDD is now elsewhere.

  Thank you very much for read/answer/help me already.

  Hello

  Before you try the following, make sure that you can always read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

  Create an installation disk yourself using another PC - just download the good Disk Image from the link below (this has to be the same version as your original OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it's the commercial version accurate , you would need).

  Use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to complete the installation of Windows 7 on your new SSD, enter the activation key of Windows on the label of the COA in the request and one time Setup is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just that a new installation of Windows 7 without software load additional normally comes with facilities OEM.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Drivers and additional software you may need for your laptop can be found here.

  Kind regards

  DP - K

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner