TS140 RAID 100 controller listed do not as a controller of storage in Windows Server R2 2012

Similar Questions

• Windows Server Std 2012 R2 domain controller

  Hello world. We have problems in the domain controller with Windows Server R2 2012 in the VM that it helps domain users to connect to the DC remotely with admin rights. We have already allowed group policy by default on the management of the user rights that allow remote only for domain administrators. We did not refuse access, because the new user must be added to each new user creation. We do not want to use distribution of the Group deny. is it possible to access remotely to DC?

  Thanks in advance.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Can we use Windows Server Standard 2012 license on Windows Server 2008 R2 to company where some applications do not work?

  Hi support them.

  We intend to buy a new license for Windows Server Standard 2012 that we have been informed of this business license Windows Server 2008 R2 are no longer available. But where some of our applications do not work on the new OS, can we still use the new license if we intend to install Windows Server Enterprise 2008 R2? Appreciate your response.
  Best regards

  Hi Glen,

  The question you have posted is linked to the License Server 2008 and 2012, and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• Hard drives not found when you try to install Windows Server 2008

  Hey guys and girls,

  I've spent the last 20 hours, trying to solve the problem of not being able to install windows server 2008 r2 on a new Dell server.

  My configuration is:

  Dell PowerEdge R310

  4 x 1 TB 7.2 K SATA HDD

  Controller Raid PERC H700

  I can't even install the drivers that I downloaded from the Dell support site because Windows Server 2008 Setup will not recognize them.  These factors include the Raid Controller, chipsets Intel, SATA etc.

  I used the settings default, all changed the Auto Off Ports and vica versa, I put the server in Raid and ATA mode with all the possibilities, but it will be will not detect any HD!

  Please help, as it is essential for my health, employment and mental health.

  Best regards

  Sami L.

  What OS?  What RAID controller?  How many discs?  The size?  RAID level?

  I can't assume that everything is the same, especially when you have a different system altogether which does not support the H700 (so the files would have been meaningless even if Dell had not broken links). :)

• Only windows server DHCP 2012 does not accept windows 7 Starter ip addresses?

  I want to connect to my PC for wifi, administrators have installed windows server 2012 for the administration of wifi network, they claim that it will not get connected to wifi because I have windows 7 starter edition

  Your question is absurd that there is no distinction between an address IP of Windows 7 Starter.  The DHCP server, they can be configured in different ways, but at its core (no change) he will present IPs to any device that requires correctly and a system functioning and correctly configured Windows 7 Starter would not have a malformed request especially when talking to a Windows Server.

  So as I said before, they do not want you BYOD.  * fault *.

  Windows 7 Starter system in good condition is more than able to get an IP address from any properly configured and nice DHCP server.  I assume that the server is properly configured, just not nice or the workstation is not healthy.

  In other words, you're them, misquoting their incomprehension or they tell you the easiest thing without just said, 'No' or there's something else wrong with your system and that they have no desire to fix it for you, or they should not run such things.

  The simple fact is that Windows 7 Starter is not innate difficulty communicating with a server DHCP R2 open and properly configured windows server 2012 or 2012 in order to get an IP address for itself; now (the server might would be) well assured in several ways but and the Windows 7 Starter system could have all sorts of questions...

• Printer does not immediately appear under device & printers on Windows Server 2012 R2 VM. Printers appears after 15-20 min or more.

  Hi team,

  I have a question where adding a network printer is successful. I can see the printer in the Device Manager and I can print as well. However, it does not immediately appear under devices and printers and takes a long time to appear. Can someone help me please as soon as possible?

  Thank you

  Anand N V

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Multiple instances do not have parallel job using scripts on Windows Server

  Hi all

  I download after effects template on my site, the user came and download the desired content.

  I'm updating the model using scripts with the content of the user and then video rendering and therefore user get video with his text/images uploaded etc.

  its working perfectly when I update a unique model, but when multiple users come at the same time, then they need multiple instances of sequels

  so I opened multiple instances of after-effects by using "m" with after having shortened the effects

  

  After looking at the windows Task Manager, there are two instances, but the problem is

  one continuous instance and the other stop, at the end of the trial the second still paused state

  

  I need 2.3 4 or any case to work in parallel without pause/stop

  I am using windows server 2008 R2 with installed XAMP

  It's a Setup completely unsupported in first place and you will be difficult to find someone who can help you. Probably, you will need to create separate shortcuts / files in batches and run them in separate instance contexts. AE itself always detects running instances and reuse.

  Mylenium

• New TS140 - cannot get Windows Server 2012 demo of R2 to install

  Hello

  I recently bought the TS140 and attempted to install the demo of Windows Server 2012 available from Microsoft.  I completed the following steps:

  (1) engraved an image ISO for the demo on a DVD.

  (2) load on startup the thinkserver DVD format the disk, download updates and prepare the installation.

  (3) at the end, I put the DVD in the drive.

  Despite the DVD being burned successfully, the guard TS140 eject the DVD and asking for the disc.  Issues related to the:

  -Someone installed via the demo and can give advice on the process?

  -Is the DVD of the right way to go or should I go with another method as a USB?

  Sorry, I'm use to the insertion of a DVD and occurring start installation.  Try to install after the initial drive of Lenovo is causing me some confusion.

  Thanks for your help!

  First of all, thanks to all for their persistence I managed to do the work.

  Basically, if you download the ISO of the evaluation version, YOU cannot USE the native Windows ISO burner.  When I copied on a drive and had Windows burn, it just don't understand the disc.  However, when I used the Windows store software specially set up the server:

  http://wudt.codeplex.com/

  He worked very simply.  I am extreme newbie, so it was difficult.  If you have purchased a TS140 and try Windows Server, follow these steps:

  (1) copy eval on the Microsoft site.  They have like 10 files to download, but you only need one ISO.  I don't know how the other files.

  (2) use the ISO burner of the Microsoft store - its registered for use with Windows 7 but worked like a charm.

  (3) use the boot (ThinkServer Easystart) disc that comes with your server, or as a recommended download the most recent copy.

  4) go through the steps.

  (5) when you are prompted, insert the new drive of Windows Server R2 2012.

  (6) it must go through the installation.

  Once again, thank you for not giving up, and I hope that my instructions about help an absolute beginner.  Probably simple for experts from the server, but I've never used Windows Server (other than Windows Home Server which was awesome, but abandoned!)

• ACS 4.1 supported with Windows Server 2012 domain controller

  I put to level my domain controller / Active Directory from Windows Server 2003 to Windows Server 2012.

  In my environment, I use Cisco ACS 4.1 that is built into Windows Server 2003 Active Directory.

  ACS4.1 will be working perfectly with my new domain controller (Windows server 2012) or I need to improve my ACS too?

  Kind regards

  Junaid

  ACS 4.1 does not support the 2012 server that you should update

• Can not unlock a desktop session remotely on Windows R2 2012

  If I remote desktop to a Server Windows Server R2 2012 and then Ctrl + Alt + end, and then choose lock to lock the RD session, I don't see a way to unlock the session.  I try Ctrl + Alt + end and it does nothing.  I don't see any buttons and have tried several shortcuts (Windows key +) and had no luck.  I made (mstsc.exe) remote desktop, I have clicked on the Options show, went to the tab local resources and ensured that keyboard is set to Windows apply combinations of keys on the remote computer.  When I try to Ctrl + Alt + Delete, my office shows me the menu (to lock, etc.).  The remote session does not receive this key combination.   My desktop is Windows 7 Enterprise.

  Is there a key combination I'm missing?  or is there a setting on the server that is required/missing?  Or would a group policy to ask this question?

  Note If I have a remote desktop to a Windows 2008 R2 server, I can easily unlock the screen. Furthermore, we use RSA with a connection token.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Server certificate 2012 R2 autoupdate not working

  In Windows Server R2 2012, certificates are not automatically being updated therefore with question as 'unknown Publisher '. I tried to install the same application in other machines with 10 Windows and Windows 7 and I can see Publisher name correctly.

  I tried to install the certificate manually in server R2 2012 but certificate still shows the old information (validity). Please guide me what the rule of firewall and service causing this error and how can I update manually or by windows update.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The Indexing Service does not not on Windows server R2 (Server Manager)

  In Windows 7 Enterprise or Windows 8

  I activated the indexing service in or out of the Windows features screen.

  

  After installed I restart the server. Opens the computer management on the server. Indexing Service installed appears under the Services and Applications

  

  In Windows Server R2 2012, I turned the "Windows Search Service".

  

  In the computer management screen, showing not the indexing service. ?

  

  Please help me on this.

  If I had no bad thing help me.

  Thanks :)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Cloud management authority seizes not password provided by Cloudstack after the deployment of Windows Server 2012 R2 Datacenter Edition on a virtual machine

  I want to use Windows Server 2012 R2 on a virtual machine. When I start the machine virtual first time, Manager of cloud instance that is installed on the operating system intercepts not created by Cloudstack password. When I reset the password, and then he grabs this new password and I can access VM.

  That's the problem with compatibility with WIndows Server R2 2012 nursery cloud instance? Because the same version of it works well with WIndows Server 2008 R2 VM.

  Hello

  Republish the question to the Forum on TechNet.  These professionals are better able to help you.

  System Center Virtual Machine Manager 2012: improve the private cloud

  http://TechNet.Microsoft.com/en-us/magazine/jj819418.aspx

• SCSI/RAID Host Controller, reports "tv_ConfigMgrErr39".

  I ran the reliability and performance monitor on my laptop and the SCSI/RAID Host Controller has been highlighted that does not properly.

  The information contained in the diagnostic reliability monitor results and performance are:

  * Symptom: * _Device drivers marked as corrupt. _
  * Cause: * a device has a configuration issue preventing it from working correctly.
  * Details: * the device, the SCSI/RAID host controller, reports
  'tv_ConfigMgrErr39 '. This device won't be available before the question
  is resolved. The Plug and Play ID for this device is
  ACPI\PNPA000\4-4D18F2DF-1.

  When I check the SCIS/RAID Host Controller Properties, it says under device status:
  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  To search for solutions, nothing is found. There is also no driver software to be updated.

  Would it be the result of some kind of change due to an update or
  something, I ran the monitor first getting the computer (a little
  For more than a year) and has not been advised of any errors. I posted this information in the Microsoft forum and was advised that submit a post here can find me an answer and also to check the appropriate driver downloads. My computer is telling me to contact the manufacturer of your device to download the software, but in its properties, there is no listed manufacturer. I can't get the Toshiba site for a download of driver that I have no idea what this component is and have no idea where to start!

  I would be grateful for any advice (relatively uncomplicated!) and a gentle nudge in the right direction of a appropriate driver.

  Thank you very much
  Sarah

  Hello

  To be honest I don t know what you re talking. It would help if you could post some information like your laptop model.

  39 error code usually means that there is a driver problem so I updated the driver. You can find the latest version on the Toshiba site.

  Sorry mate, but that s all I can say at the moment.

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.