LOOP OF STARTUP REPAIR... Windows 7, 64-bit, SP1

Similar Questions

• Loop of startup repair after vista update on 15-04-09

  .post a {text-decoration: underline ;}}

  Hello

  I hope someone here can help me.  I tried Googling for solutions, but after having tried everything without success, I'm bringing my problem here.

  I had gone through the internet when the program to close unexpectedly.   After trying to restart my laptop Dell 1720 (Windows Vista Home Premium), I went to bed after seeing the stage 2/3 update on the screen. It shows, in the morning, he can not start and gives me the ability to startup repair. After that, it is said that it cannot repair this computer automatically. Details of the problem are the following:
  Startup Repair V2
  AutoFailover
  6.0.6000.16386.6.0.6001.18000
  Bad driver
  WrpRepair

  I tried to restore to previous restore points (all tell me there's a missing file, error code 0 x 80070002), safe mode, last known good configuration and I end up in the same loop of startup repair. I have not installed recent programs, drivers and devices.  I am depressed and want to avoid going back to a factory installation since I've had this laptop for a year and have a ton of files and programs.  Anyone with any suggestions would be greatly appreciated.

  ETA: I also run chkdsk (no errors found) and sfc/scannow (Windows Resource Protection cannot run task or something like that).

  In fact, my problem has been able to start Windows Vista after the last update (14/04/09) install.  The error code came when I tried to restore my system to my restore points.  Finally I ended up taking my hd to access my data.  Then I tried to reinstall Vista from Dell provided and had problems reinstall drive to do so (hung up END INSTALLATION).  A call to Dell support had me change some of my BIOS settings and finally managed to get Vista installed.  Now, I'm in the painful process of restoring all my programs and personal data.  This time, I created a partition for the operating system and a separate for all my photos, music, etc. so I don't have this problem of losing all my data the next time the fact once again Vista (and it will be!  I already lived 2 BSOD since reinstalling 2 days ago!)  So, there was no solution to my original post.  Good luck to everyone else who has the same problem with the Vista updates.

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• Earlier to let windows 7 update itself, now system won't boot & Startup Repair windows don't fix it either, help please?

  said the system offline?

  http://Windows.Microsoft.com/en-AU/Windows7/Startup-Repair-frequently-asked-questions

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information. For more information, see What are the system recovery options in Windows 7?

• Black screen startup repair, Windows 7 cursor

  After installation of about 25 updated today, my Windows 7 Ultimate Boot Camp partition on my 9.1 iMac no longer boot Windows. I think there could be a problem due to a video card driver updated, although I have no way of knowing if a driver has been updated.

  I use the Startup Repair tool, but I have a black screen with no cursor. I got the text screen to enter the startup as well as the Windows logo for a short period after this repair. When I put my ear close to the computer, I could hear the disk being accessible so I guess the Startup Repair did something, but now when I listen to it I can hear the fans. I started about 90 minutes ago the Startup Repair.

  My question is how can I find out when the Startup Repair tool is completed? Will it automatically reboot the machine, or wait for the user to input after it ended? Use mouse input any required or can I do blindly using the keyboard?

  Also, is it possible I could get Windows starts in Mode safe? This way I could isolate any problem with the video card drivers. There is no option to start in Safe Mode, when I turned on the machine. Note that because I use a Mac, I don't have the BIOS screens, I UEFI which, on Mac, gives only a choice of which partition to boot from.

  I need is no longer an answer for this.

  Here's what I did:

  I turned off the computer using the switch after 2.5 hours of startup repair and checking that I could not even hear the disk being accessed... Windows would not start again. I started in El Capitan (Mac OS X) and installed the rEFInd Boot Manager. I rebooted the machine, intending to try to fix it from a floppy disk, bootable USB Win 7 Ultimate, but selected by mistake partition Boot Camp and Windows started normally.

  The only thing I can think of that changed is that I installed rEFInd, but I don't know why, it would make a difference.

• Windows 7 64 - bit SP1 apparently random freezes for about 30 to 60 seconds

  Other users of the computer,

  I am using windows 7 64 bit home edition premium for a few months now. I have a problem in which windows seems to freeze. It can happen anywhere from 4 or 5 times the time to 'only' once every two hours. I can move the cursor, but I can not click on windows, use alt - tab and so on. Usually, this will last between 30 and 60 seconds, after which everything returns to normal. It seems no matter what I do when this happens. During navigation, games, Assembly, etc... The gadget from windows performance tells me the cpu is about 1-5% and the RAM is not at maximum. I tried to:
  -set the system to high performance. HDD sleep disabled. Hybernation and disabled sleep
  ran-a cleanboot. Problem has happened yet (playing Battlefield 3)
  -a run the File Checker system windows using an elevated command prompt. No problem there.
  -checked all (1 SSD and HDD 2) drives for issues with checkdisk and SeaTool. No problem found.
  -checked for malware malwarebytes with MSE. No problem there.
  -uninstalled VLC player I saw a dozen of entries "reconfigure" in the form of reliability of windows (or whatever it's called)
  -disabled Aero icon composite (?) Use the Dutch version so I'm not sure of what his English in)

  -turned off refresh of wallpaper

  -order stickynotes (as I came across something where the viewer in which he said he could not access)

  -closed sidebar and practically another program that was underway...
  .. and still the problem occurs. I don't have this problem under Vista 32 bit but I must say I have updated my graphics card and added the SSD at about the same time, I decided to move to W7 64-bit.
  These days I kept a journal when it happens. When I cross check these with the event viewer I get a few events 4624, 4672 and 7036, which stand out. They do not seem to take into account all issues well.
  Some system info:
  Windows 7 Home Premium SP1 64-bit
  Intel Core 2 Quad Q9550 2.83 GHz
  4 GB of Ram
  MSI GTX 560 Ti
  1 x OCZ agility SSD 3
  2 x WDC 1 TB SATA HDD
  Any help would be GREATLY appreciated as I don't know where to look for more. Once again, thank you for reading!
  Best regards
  Rombout

  I spent a lot of time to check all components in my configuration. From the bios, cables on memory, software and so on. It turned out to be the ocz vertex 3 ssd which was the question. I made an update of the firmware, secure erase, and all I could do with the help of assistance from ocz with no sollution. I'm the DSS to return this week and exchange it for one ssd intel. Check the forums to ocz for your type of ssd n additional info to see what you could try. If not, return it immediately.

  Good luck!

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• New OEM Windows Ultimate 64 bit SP1. but can not activate.

  Salvation;

  Have installed a Dell OEM W7 Ultimate 64-bit SP1 Version.   Here in Germany ANY OEM can be installed on ANY computer - regardless of manufacturing.  (law since 2000)  Activation failure.  Although the product key is correct - have checked with Keyfinder software - I get the message-"the product key you entered cannot be used to activate Windows on this computer.  The error code is 0 x C004C008 - checking out tells me that either the operating system has been installed on computers too or was reinstall on the same change computer - hardware computer - or transferred from another PC - NONE of these are correct in this instance.  The OS is new - has not been used - never been not installed on another machine - no material change - and not been reinstalled.

  What is the solution?  I tried using command prompt - correctly - installed product key but also the same error after installation!

  Could you link me to this law that allows the transfer of the OEM licenses?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• \3\DLCXtime.DLL startup error, Windows 7 64 bit

  I have error \3\DLCXtime.dll at startup. I used to have a Dell AIO 926 installed on this machine, but it is now gone from my home. I can't remove the software from Dell AIO 926 of the Remove Programs list, and I can't reinstall the drivers again found in http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/dell-926?driverId=R150575&osCode=W764&fileId=2731117707&languageCode=EN&categoryId=PR without physically reconnect the printer.  Any help is appreciated!

  Johnny

  Hi, Johnny,.

  Follow these steps to remove drivers.

  Start > type services.msc
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall

  Go to uninstall programs in Control Panel

  Remove the drivers for the printer does not exist
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
    
  Go to the manufacturer's website and search for updated drivers

  Dell drivers and support
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

• CS4 crashes on startup on Windows 7 64 bit

  My company has recently updated cs4 with windows 7 and decided to go with production premium. We're going to, its been installed and works in all programs except first that crashes after loading plugins. We tried to contact adobe in this matter, but they were useless say the least. We use the same windows 7 and premium production as all the world, it is probably a common problem with a common solution?

  How did you install Win7, incidentally?  You upgrade a previous operating system, or was this a new installation?

  The call stack appears to show that one of the plugins MediaIO writer goes down in flames.  Guess Bill quicktime was one - it could also be that Windows Media is somehow lack of some components.

  Here's what I would try: go to the following folder:

  c:\Program files (x 86) \Adobe\Adobe Premiere Pro Cs4\MediaIO\writers\

  Rename all the extensions file to .old or something.  Launch - the application load now?  So, if this is the case, re-enable one at a time, lance each time, until you discover which are causing you trouble.

  (Then after return, so that we know and can eventually figure out how to work them again.)

  See you soon

• The Aero effects do not work in Windows Vista 32-bit SP1

  Original title: "Microsoft Description Windos Vista Premium SP1 32 - bit English 1pk OEM product DVD.

  Visual Aero Glass in Windows are not working or displayed

  Hello

  Follow the steps mentioned below and let me know if this can help:

  Method 1: Please run the fixit provided in the link given below by clicking on 'Run Now':

  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  Method 2: To enable Windows Aero, follow these steps:

  Start the themes service. To do this, follow these steps:

  (a) click Start and run, type services.msc, and then click OK.

  (b) in the list of installed services, click themes, and then click Properties.

  (c) in the startup type list, click Automatic, click on apply, click Start, and then click OK.

  Method 3: Please refer to the article mentioned below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• Windows vista 64-bit sp1 home preimum

  I bought a dell computer aliitle a year ago that the hard drive has gone bad. I took a workshop and a new hard drive installed and all the original software reinstalled from my cd that came with it. Now three weeks later I get a pop up window saying that my copy of vista is not genunine. This does not as far as I know. I have the cd but not the sticker with the actavation code and not on my laptop anywhere. the paper sleeve that the cd is in has a barcode that says dp / on172h we-on172h-73310 - 92 h-533j revaoo I don't have the money to just buy another code, nor should I have to because the laptop came with it first and I am the original owner of it since the new from best buy. Can you please help me. Donald E Isaacs * address email is removed from the privacy *.

  I contact the repair shop and ask them to fix the problem free of charge for you. Boulder computer Maven
  Most Microsoft Valuable Professional

• unspported functioning after you install Microsoft Virtual PC 2007 on Windows 7 64 bit SP1(64bit)

  Hello

  I installed Microsoft Virtual PC 2007 SP1(64bit) from here

  However, I met this errro:

  

  If the host operating system is Windows 7 Ultimate 32 bit, you cannot load a 64-bit operating system in the virtual machine. The host operating system must be 64-bit to run 64-bit virtual machine.

  Also, if you are running a 64 bit version of Windows 7, then you need to make sure that you have selected the right architecture of Windows Virtual PC on Windows Virtual PC download page.

• Windows Update says that my Windows Vista (32 bit - SP1) is up-to-date - but is not

  I'm doing a fresh install of Vista on my desktop computer - using the original recovery of the DVD provided with my system. Installation went without a hitch and I am now manually check the updates of Windows. Had a devil of a time getting SP1 to install - it kept appearing as having been installed in my history of update - yet when I checked in system properties, there was no indication that SP1 had actually been installed. To overcome this problem, I downloaded the SP1 from Microsoft and installed manually. Now run the SP1 successfully and since I run Windows Update manually a few times and you have installed all available updates. Now, the problem is that Windows Update says that my version of Windows is "up-to-date" - and I know that's not true that I am yet to SP1 and the latest Vista service pack is SP2 - that Windows Update does not offer me because he sees my machine as being up to date. I tried to download and run the Microsoft FixIt tool and have done so several times. Whenever I run this FixIt, the results show that there are problems that need to be addressed and which are later 'fixed'... yet Windows Update continues by saying that my machine is up to date, when, obviously, is not. Machines confused!

  Any help, guidance, advice, and/or marriage offers will be entertained and appreciated (just kidding on that last one). Thanks in advance!

  Mark

  «Billybogs, thanks...» In fact, I found this answer even very late last night and had not yet had the opportunity to post my resolution. After trying FixIt after FixIt and even deployment of the tool was updated to Vista system, I still was getting messages from Windows Update saying that my system is up to date. Then I got the great idea to download and manually install SP2 - as I had also had to do with SP1 somehow. And sho' enough that did the trick. So thank you for the answer you provided - it was the same answer that I myself had discovered late last night. Thanks again!

  You should be able to get SP2 from here: -.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

• Error 0x800f081e cannot install the Language Pack on windows 7 64-bit SP1 PRO English

  Hello

  I tried to change the language on my windows from French to English. I used this method

  Run CMD as administrator and type:

  DISM/Online/Add-Package/PACKAGEPATH:(path to lp)

  bcdedit/set {current} local (your locale)

  BCDboot % WinDir % / l (your locale)

   

  And I downloaded the lp of http://www.wincert.net/tips/microsoft-windows/windows-7/2086-how-to-use-another-language-pack-on-windows-7-home-premium-and-professional.html here

  But I get an error:

  That means that the specified package is not applicable to this image the DISM log file is located at...

  Can someone help me with this please?

  Thank you

  Hello Myriam.

  Thanks for posting your query in Microsoft Community.

  I understand you are trying to change the language of your Windows from French to English and the receiver by. I'll be happy to help you with your query.

  Ideally, when you install a language pack or choose a language other than your system language, most of the functionality is displayed in the language updated the. However, there are some system settings that might still appear in the base language. In this case, we would need install the new operating system choose the language desired.

  I suggest you refer to the article below to understand how you can get the display languages.

  How can I get additional display languages?

  Important: Language packs are available in Windows 7 ultimate through Windows Update as optional updates. They are not installed automatically. If you are using Windows 7 Enterprise, contact your system administrator for more information about installing additional languages.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.