Black screen startup repair, Windows 7 cursor

Similar Questions

• Start window manager: sometimes when I started my PC I have a black screen with the Windows boot manager at the top.

  Sometimes when I start my PC I have a black screen with the Windows boot manager at the top.  Although there are several options available, that nothing happens no matter what keys I hit and the only option is to shut down the computer and restart completely.  Sometimes the Boot Manager page turns and my office sometimes opens fine.  I've updated with everything Microsoft has Windows Vista and I still get this screen.  Anyone has any ideas.

  Do a startup repair and see if that fixes it:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• Screen is frozen with a black screen with blue windows logo on it.

  Original title: problem of Windows 8

  I just bought windows 8 and is now downloaded and installed. But it seems that my pic froze or something because for about 2 hours now it is stuck on a black screen with blue windows logo on it. After research, I found a video and in this screen in a minute or two! Anyone know anything about this? I need ASAP thank you!

• HP 500-046: 6 beeps at startup, can't access boot options (black screen) but then Windows loads ok

  After making a system image backup I wanted to test the recovery disc. To start from the cd tried to change bios to disable secure boot and enable legacy startup.  Could not get the pc to boot once so reset cmos by shorting the pins on the mboard.  Now to start always get 6 beeps and black screen, but after a minute, windows login screen lights up and it works fine.  Unable to access the bios Setup screen any key used at startup.  6 beeps indicates a video card problem, but no material error in device mgr points.  Want to update to Win 10, but unsure about do to address this problem starting.  Appreciate any help.

  @JohnN59,

  Thanks for the information to know.

  You can try the DVI port on the motherboard

  I/o Ports and internal connectors

  Rear i/o ports

  Figure: IO back panel

  

  1. USB 2.0: 2

  2. Output S/PDIF port optical

  3. VGA

  4. DVI - D

  5. LAN

  6. USB 2.0: 2

  7. USB 3.0: 2

  8. Audio: Port of central/subwoofer (yellow-orange)

  9. Audio: Rear Speaker Out port (black)

  10. Audio: Side Speaker Out port (gray)

  11. Audio: Line (light blue) port

  12. Audio: Output line port (lime)

  13. Audio: Microphone (Pink) Port

  If is not shows the start then try the Bios reset/recovery (windows + B key).

  Please keep me updated.

• Windows startup at black screen after the Windows logo

  Original title: Evga Nvidia GeForce GT 520 1GB black screen graphics card

  I have a Hp Pavilion 6400 in the series which ran on Windows Vista (32 bit). I recently installed Windows 7 Ultimate (32 bit) and now the screen goes black once the windows logo closed its animation. I uninstalled the driver, re the driver installed and configured my system to the lowest resolution.

  Already found in the forums.
  -TV is too old to be compatible.
  EVGA - technician told me that the food was not powerful enough.
  -Forum Windows says: error in Explorer.exe.
  -Also found response that runs the computer through MSconfig would solve the problem.
  So far, none of these solutions have worked. Answers appreciated.

  Problem solved.

  It turns out, the driver for the video card would never completely install due to its mode of operation.
  Solution.
  1 restart Windows "low resolution".
  2. access to the form of previously downloaded files driver install the EVGA site while in safe mode.
  3. once divers have installed I changed the resolution in a HD rather than a framework
  "(native)" parameter in the resolution section.
  4. application of the Windows updates.
  5A started playing Star Trek Online.
  Thanks for your reply and have a great week.

• Black screen with reduced windows of the internet (sometimes white)?

  I recently bought a battery from amazon and have experienced several times. What could be the problem?

  Hello

  You try to perform the steps mentioned in the link below and see if that helps.

  What are the system recovery options in Windows?

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  (Try the startup, Windows Memory diagnostic repair)

  Additional information:

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  Please feel free to write us back for assistance.

• I uninstalled AutoCad 2013 after reboot I get black screen only. Windows 7 Explorer does not start

  I uninstalled 2013 autocad and autocad inventor of my laptop. I have windows 7 Home premium. Once the pc is rebooted, I get only a black screen with my curor. I tried to start in safe mode, but is samething.

  See if you can get to the "Startup Repair" via the F8 startup screen or your Windows Installer media if you have an installation DVD.  Try to run the "Startup Repair".

  Startup Repair.

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as missing system files or damaged, that might be preventing Windows to start.

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx#EFF

  How to use the command prompt in the Windows Vista recovery environment
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  You can even try a restore of the system of this environment.

  With the help of the environmental recovery of Windows 7 or Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial142.html

  How to use system restore to log in Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Black screen T400 with windows xp

  a friend of mine gave me his Lenovo T400 to install Windows XP on it

  He previously worked fine with windows 7 and 8.1

  then it starts in preinstallation of windows XP screen, it formats the hard drive and as usual instalation automatically restarts after this BUT his black screen, lights and sounds show that it works and goes to the next screen BUT the screen is still black. Put power off then turn on again does not display any image of the screen. Open he removed the battery of the Bios, turned upward after a few pennies and turned off it starts it reset the bios.

  So now it has photo and it goes on the next screen Windows instalation as usual, after the installation of devices and other things, it restarts automatically as usual BUT there is NO new screen, black screen, lights and sounds new show that its loading windows end instalation screen, but no image on the screen.

  Reset the BIOS again, it starts normally, and this time shows BSoD with code 0x7B, after once again the BSOD screen black

  Maybe it's a setting in the BIOS? tried to install with the AHCI drivers and tried to install without driver for Compatible, what else is there? Updated the bios to the latest version, same result.

  To say again - it works very well with other windows, but XP should be installed

  There is a manual for installing XP on these laptops, I have not read, sorry

  so the black screen is because of the switchable graphics option in the Bios that is not supported by XP

  It works fine now after a whole an integrated and disabled for OS detection framework

• Earlier to let windows 7 update itself, now system won't boot & Startup Repair windows don't fix it either, help please?

  said the system offline?

  http://Windows.Microsoft.com/en-AU/Windows7/Startup-Repair-frequently-asked-questions

  What happens if startup repair is unable to solve my problem?

  If the repairs are not successful, you will see a summary of the problem and links to contact for support information. Your computer manufacturer may include additional support information. For more information, see What are the system recovery options in Windows 7?

• E5 - 511 black screen after installing Windows 10

  Hi, not sure I can ask a question here already?

  Well, this: I improved my longs E5-511 Windows 8.1 for Windows 10. After a cold start, it appears a black screen, until I have press the power button until it stops. Start again, it's OK, although slow. I found discussions on this matter by Google, it seems men to the Intel HD Graphics driver. According to Device Manager, I later. There is a 64-bit device driver Windows 10 on the Intel web site that looks much newer, but it refuses to install it.

  Any ideas?

  You can try the drivers on the website of acer for your model:

  http://us.Acer.com/AC/en/us/content/drivers

  If this does not work, you can download and use the Intel driver update utility.  The best thing to try first the driver from the Acer site.

• My Acer Aspire 571 e5 allows me to connect, but then I get a black screen and I see my cursor

  Hello

  So my Acer Aspire 571 e5 which ive been using for about 3 days just had a windows update. Now, it starts well but I get a black screen when I connect. However, some programs are always able to see and popup randomly. I also tried to go into my bIOS, but it asks for a password that I don't know.

  If you press CTRL + ALT + DELETE you are able to open the Task Manager?

  or try this:

  (1) once you are on the screen of login password, press on and hold down the SHIFT key and click on the power icon (lower right corner of the screen) and restart your computer... (Remember do not type a password)
  (2) you will get advance options. Click on troubleshoot---> advanced---> start---> restart settings---> and select SAFE MODE WITH NETWORKING

  (3) once in office in safe mode, open Device Manager, click on the video card, right-click on it and choose unisntall

  (4) restart and check if it works

• Pavilion dm4 1041tx: black screen after the windows logo

  My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
  Hard drive test results:
  Smart check: past
  DST short: PAST
  Long DST: PAST
  Help, please...

  Hi @vikash4309 ,

  At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

  If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

• black screen appears in windows movie maker

  My windows Movie Maker allows to work properly, I have windows vista, but this last year, when creating and previewing my film but nothing black screen appear instead of my movie... Don't know what happened. Even if idon't preview I will burn the dvd and then play on my dvd player and I still get the image black all through the film I've done. I tried to change all the filters in any way diff but no luck. I can't get any help from anyone. Help!

  Maybe... I want to say just maybe you would have a
  best result with and older version of Movie Maker.

  No guarantee but the next for an installable download
  version of Vista Movie Maker 6 may be worth a try

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Also, Movie Maker 2.6 will work on Windows 7:

  Windows Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)