Windows 7 64 - bit SP1 apparently random freezes for about 30 to 60 seconds

Similar Questions

• Windows 7 64-bit USB mouse randomly freezing

  Hello

  My Microsoft Wireless Natural Ergonomic Keyboard and Mouse 7000 freeze randomly.

  OS: Windows 7 64-bit

  Drivers: Latest IntelliPoint IntelliType

  Latest drivers for p6x58D premium mobo and all Intel chipset drivers USB installed. All the drivers are up to date.

  Several other posters here have the same problem. Their solutions have ranged from:

  (1) disable USB (tried without success) power management

  (2) updated drivers (fact) (fact) windows update

  (3) use the usb mouse not (not an option)

  (4) time of DPC latency (not verified, no problems)

  Uninstalling drivers USB Root Hub 5), reboot to reinstall (does not work)

  The only thing I have left to suspect, is that I had to plug the mouse/keyboard before installing intellipoint/intellitype for the first time. As I built the system from scratch and have no other key/mouse, I need something to click/press to do the installation of windows and intellipoint/intellitype. Yes, the instructions on the set of microsoft to install software first of all that's probably the source of the problem? Should I track down a PS/2 mouse, reinstall all the drivers for mouse/USB?

  Any other suggestions?

  Hey Chris,

  I found the source of my problem. As others have suggested, wireless interference are the problem. :(

  However, before the test of this theory, I removed all the neighbours of the wireless devices, (not a microwave nearby) and moved the mouse right next to the receiver which was attached to my desktop, but it has not solved the problem. This leads me to believe that the issue is not reached. After all, if the mouse is 3 inches of the receiver and still problems...

  However, after reading around online, I found a place that mentioned that large metal objects can interfere with signal as well. Then it dawned on me that my entire computer chassis was made of steel. It is not a plastic case, rather a metal.

  I purchased a USB extension cable and kept the receiver for the mouse wireless of the case, and all the Frost took to occur! :)

  Thanks for all your help, Chris, Debra and Curry!

• Chinese PC troubleshooting Windows 7 32-bit slow and random freezes

  A user has a Windows 7 PC from Dell's traditional Chinese version.

  During the investigation into his slow and problem of slow performance (random freezes), I tried running sfc/scannow in command prompt. However the command stopped at 56% with an error message regarding the protection of resources (sorry it's in Chinese), so the sfc has not completed.

  When I tried to start Windows in safe mode, the options menu advanced boot could not be considered. It was only a black screen. Clues? Someone has already tried to uninstall the antivirus software. User customer a lotus notes 8.5 is installed.

  People, I thought that random freezing is caused by a failing hard drive, so we replaced the material.

  Thanks for reading.

• Qosmio F60 - randomly freezes for about one second

  Hello

  I have a qosmio F60, and recently I've had random freezes even while typing of the atm.
  So, my phone freezes for a second time and it's getting really annoying. To do little matter what I do...
  I have restored the pc to factory settings and updated all the drivers, but I always get this annoying problem...
  Any help would be appreciated.

  I thought that the problem is a * SUDDEN FPS DROP *... save me. -pls

  Post edited by: ralph_af

  > I have restored the pc to factory settings and updated all the drivers, but I always get this annoying problem...
  Hmmm... Why update all THE drivers if you n t know why this happen?
  You must restore mobile settings, open Notepad, and test it. can you confirm that to happen immediately after the restore laptop to factory settings?

  It is not easy to help with these issues. We don t know what kind of things is installed on your laptop, that extra ((troisieme party software) applications are installed, background processes are active, how your operating system is configured and so on.

  In my opinion a background activity is responsible for this. It can be installation of updates from Microsoft if you defined the option automatically. It may also be some antivirus analysis activities. Who knows?

  Try to change the configuration of the OS and operating system settings.

• [Windows 7, 64-bit] Xbox controller wireless connects for about 1 minute, then disconnects

  The controller used to work perfectly fine, and then I put on a shell and now it's all messed up. I re-installed all software driver and I spent my mouse and keyboard to the USB 3.0 (if this even helps you what either). Is the shell causing weird interference or is there a solvable problem?

  Also, when it works for this short period of time, it works 100% fine.

  Brian,

  Please contact the Microsoft Community.

  I you have to check out these items-

  http://support.Xbox.com/en-us/Xbox-360/accessories/controllers-remotes

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  If you continue to deal with the issue, so I'd like you to contact support - Xbox

  http://support.Xbox.com/en-us/?XR=shellnav

  Know let us know how it rates for you.

• On my vista ultimate 64 bit SP1 the Skype freezes often.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: on my vista ultimate 64 bit SP1 the Skype freezes often. Please help me to fix it! Thank you very much!

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  try asking here http://forum.skype.com/index.php?showforum=2
   

  Best regards
  Singapore Web hosting

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• Audio Software OR Traktor - freezes for about half a second because of Dual Core

  Hello

  I've been test Native Instruments Traktor DJ Studio 3 and very often the audio timeline would freeze for about half a second and the game continues. I also have a good low latency soundcard PCI card, so that does not these breaks.

  I managed to get rid of this problem by disabling the second processor core in the BIOS setup. However, I don't like the fact that I'll have to do each time that I use Traktor.

  Is it a hardware problem or software? Software that does not use the two hearts should be able to run without problems, but apparently, there are a few interruptions happening that prevent some programs smoothly.

  That's why I'm posting here instead of the forums of NOR.

  Hello

  Why wouldn't be a hardware problem?
  The fact is that the processors with dual core Intel design and it will appear in Device Manager. Also I m sure that Intel will design with double CPU and core more in the future.

  However, I think and I'm sure it's only a software problem. Software developers have overlooked this fact that there could be another type of processors. In my opinion, you must contact the software manufacturing support to clear this problem. Maybe a few updates are available.

  That's all I can suggest.

• Computer laptop Sony Vaio freezes when playing games or watching videos or do something for about 3 to 5 seconds

  I have a sony vaio leptop with windows 7 as operating system... recently I faced a problem when playing games or watching video or do anything on the leptop it frezzes for about 3 to 5 seconds, that again, this works well, once again after 2 or 3 minutes later it frezzes for a long time... for this problem I can't do anything on my leptop... is it Please helpme...

  Original title: windows 7

  If it's a total freeze for the 3-5 seconds, check your hard drive for errors

  probably a bad sector happened where a common used file TSE

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• LOOP OF STARTUP REPAIR... Windows 7, 64-bit, SP1

  Hello.

  I have a laptop Dell Inspiron 64-bit SP1 Windows 7. I tried the commissioning and startup popped up repair.

  I have read online and tried the Mode safe mode with command prompt. It did not work. I also tried the Startup Repair. It doesn't work any more.

  (When I tried the three Security Modes, it just led me to repair system screen.)

  Problem event name: StartupRepairOffline
  Signature of the problem 01: 6.17600.16385
  Signature of the problem 02: 6.17600.16385
  Problem Siganture 03: unknown
  Signature of the 04:-1 problem
  Signature of the problem 05: AutoFailOver
  Signature of problem 06:7
  Signature of the problem 07: CorruptRegistry

  Please help me ASAP!

  Edit 1: I don't have an ERD. I don't have a USB key. Is it possible that I can do a 'repair USB,"instead of a repair disc?

  Edit 2: I can't contact my manufacturer... My parents will get mad...

  Edit 3: My computer allows once again? Or do I have to buy a new one? I think I have a MacBook.

  Hello

  If you really tried all of those then I would do a clean install.

  Installation Windows 10 using the creation of media tool - create a support and then
  Start with her.
  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  Clean install of Windows 10
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-windows_install/clean-install-Windows-10/1c426bdf-79b1-4D42-be93-17378d93e587

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• New OEM Windows Ultimate 64 bit SP1. but can not activate.

  Salvation;

  Have installed a Dell OEM W7 Ultimate 64-bit SP1 Version.   Here in Germany ANY OEM can be installed on ANY computer - regardless of manufacturing.  (law since 2000)  Activation failure.  Although the product key is correct - have checked with Keyfinder software - I get the message-"the product key you entered cannot be used to activate Windows on this computer.  The error code is 0 x C004C008 - checking out tells me that either the operating system has been installed on computers too or was reinstall on the same change computer - hardware computer - or transferred from another PC - NONE of these are correct in this instance.  The OS is new - has not been used - never been not installed on another machine - no material change - and not been reinstalled.

  What is the solution?  I tried using command prompt - correctly - installed product key but also the same error after installation!

  Could you link me to this law that allows the transfer of the OEM licenses?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Why windows 7 (64 bit) download does not work for a hp officejet 5610 all-in-one?

  I changed operating systems from XP to Windows 7 (64 bit) on a new Toshiba Portege laptop and downloaded the new drivers from the HP site for my all-in-one Officejet 5610.  Nothing went well.  I can print but not scan, and often copy is extremely slow for no apparent reason.

  I deleted the driver downloaded several times and re-uploaded to start from scratch, but get the message "Fatal error during installation."  I used HP correction for this, did everything it says and ran the download as an administrator.  When the "USB connection" screen, I connect the USB as requested, and I hear my computer accepts this connection.   But the HP installer does not accept or acknowledge inserting the USB key.  It hangs at that time here, and keeps installation disc FOREVER chasing the USB connect screen.

  When I open the HP Solution Center, he informs me that he cannot work because the download of device is not complete.

  There is no file 'help' in the menu 'start '.

  I'm running out of ideas on how to make my printer work properly with the new Windows 7 system.

  Someone at - it suggestions?

  In the case where you hear the ding that the USB cable is connected and that the software does not recognize it, it means that at any given time you connected to the computer via the USB port before running the software. When you do so, Windows takes over and tries to install their own drivers. That causes problems later, when you try to use the software, as it will then not connect when you use the USB cable.

  In this case, you must connect via the usb port and go into Device Manager and remove everything related to your printer. After you do this, unplug the USB cable and restart your computer. When starting BACK, run the software FIRST and then when he asks the USB cord this time, it should recognize the connection.