loop of unlimited errors

Similar Questions

• try opening a thaat file will work as administrator and password. Itstarts to run and then loops back to error repeating run as administrator

  I am trying to open a program that must run as an administrator, but the administrator and the password do not work. It starts, then the shows and the error message indicating the need for authorization and loops back to 'run as administrator'.

  Hello

  You remember recent changes to the computer?

  The program worked very well?

  Follow the methods below to work on the issue

  Method 1: Verify if you are able to run the file in the "clean boot" State of Windows XP.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you perform a clean boot, follow these as to configure Windows to use a Normal startup state from the article above.

   

  Method 2: start your computer in safe mode and check if you can run the file or program

  See the link below to start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Check if you can run the file in safe mode.

  Method 3: Run the system restore to the date when the file or the program worked very well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Note: System Restore does not affect personal files, such as e-mail, documents, or photos. You can only restore files that you have deleted if you have made backups of these files. Programs that are installed after that date will be lost.

  Method 4: Change the password for the administrator account on the computer and check.

• PL/SQL cursor loop... error IN the necessary clause... but several lines

  Oracle 11 g 2 Linux x86_64

  Hi all

  
  I do turn the PL/SQL block below, but get the error below. I know, the INTO clause can be used only when a single line will be returned. In this case, I know that it returns multiple lines, so why he asked to use the INTO clause?

  DECLARE

  v_object VARCHAR2 (10): = "TABLE";

  v_schema VARCHAR2 (30): = 'TEST ';

  CURSOR tblsze_cur IS

  SELECT table_name

  FROM dba_tables

  Owner WHERE = 'TEST '.

  AND (IN) table_name

  "T1"

  "T2."

  "T3");

  BEGIN

  FOR tbl_rec IN tblsze_cur

  LOOP

  Select * from

  Table (dbms_space. OBJECT_GROWTH_TREND

  (v_schema, tbl_rec.table_name, v_object)) ;

  END LOOP;

  END;

  /

  Select * from table (dbms_space. OBJECT_GROWTH_TREND

  *

  ERROR at line 21:

  ORA-06550: line 21, column 3:

  PLS-00428: an INTO clause in this SELECT statement

  It would be something more like this (untested)...

  Set serverout on

  create type object_growth_trend_row as object)
  validating TIMESTAMP,
  space_usage NUMBER,
  space_alloc NUMBER,
  quality VARCHAR (20))
  /

  Create type object_growth_trend_table as table of the object_growth_trend_row
  /

  DECLARE
  number of r;
  We varchar2 (30): = 'SCOTT ';
  TYPE nmtbl IS TABLE OF THE all_tables.table_name%TYPE;
  tNom nmtbl;
  tgrowth object_growth_trend_table;
  CURSOR c1 IS
  SELECT table_name
  From all_tables
  Owner WHERE we =
  AND table_name in ('EMP', 'Department');
  growth of cursor (tablename in varchar2) is
  Select *.
  table (dbms_space.object_growth_trend (tablename, 'TABLE'));
  BEGIN
  OPEN c1;
  FETCH c1 COLLECT LOOSE tNom;
  CLOSE c1;
  BECAUSE me IN tNom. FIRST... tNom. LAST
  LOOP
  r: = 0;
  dbms_output.put_line (' growth for table: ' | tname (i));
  FOR g IN growth (tname (i))
  LOOP
  r: = r + 1;
  dbms_output.put_line ('Timestamp: ' | g.timePoint |') Use: ' | g.space_usage);
  END LOOP;
  DBMS_OUTPUT. Put_line (' found lines: ' | r);
  END LOOP;
  END;
  /

  I just tested this in my SYS schema (although you should not create objects in SYS.)  and got...

  For table growth: EMP

  EXCEPTION in the treatment of the Charles - code:-14551 msg: ORA-14551: cannot perform a DML operation inside a query

  Timestamp: 3 July 13 09.15.27.250000 use: 5332

  Found lines: 1

  For table growth: DEPT

  EXCEPTION in the treatment of the Charles - code:-14551 msg: ORA-14551: cannot perform a DML operation inside a query

  Timestamp: 3 July 13 09.15.27.282000 use: 4846

  Found lines: 1

  Not sure why it's up the DML operation... which seems inner exception to the dbms_space package.  Even if I just run it directly in sys like this:

  SQL > SELECT *.
  2. IN the TABLE (dbms_space.object_growth_trend ('SYS', ' $', TAB 'TABLE'));

  AFTER SPACE_USAGE SPACE_ALLOC QUALITY
  --------------------------------------------------------------------------- ----------- ----------- --------------------
  3 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED

  
  4 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  JULY 5, 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  6 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  7 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  8 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  9 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  10 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  JULY 11, 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  12 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  13 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  14 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  15 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  16 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  17 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  18 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  19 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  20 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  21 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  22 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  23 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  24 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  25 JULY 13 09.19.01.956000 10342201 24117248 INTERPOLATED
  26 JULY 13 09.19.01.956000 10342201 24117248 GOOD
  27 JULY 13 09.19.01.956000 10342201 24117248 GOOD
  28 JULY 13 09.19.01.956000 10342201 24117248 GOOD
  29 JULY 13 09.19.01.956000 10342201 24117248 GOOD
  30 JULY 13 09.19.01.956000 10342201 24117248 GOOD
  31 JULY 13 09.19.01.956000 10342201 24117248 GOOD
  1ST AUGUST 13 09.19.01.956000 10342201 24117248 GOOD
  2 AUGUST 13 09.19.01.956000 10342201 24117248 GOOD
  3 AUGUST 13 09.19.01.956000 10342201 24117248 PLANNED
  4 AUGUST 13 09.19.01.956000 10342201 24117248 PLANNED
  5 AUGUST 13 09.19.01.956000 10342201 24117248 PLANNED
  6 AUGUST 13 09.19.01.956000 10342201 24117248 PLANNED
  7 AUGUST 13 09.19.01.956000 10342201 24117248 PLANNED

  36 selected lines.

  EXCEPTION in the treatment of the Charles - code:-14551 msg: ORA-14551: cannot perform a DML operation inside a query

  ... She still throws the exception.

  Doesn't seem like a package of well designed if the types are provided only in the package and not as objects of database, which are required to be used in SQL based in pipeline.

• Cannot connect to the site Web of family security - loop redirection then error.

  I am trying to connect to the Security Web site for the family to see the log files and to make some changes.  Identification of phase of my work.  When I connect on the family safety I see it bounce login.live.com and site security for the family quickly and then I get an error.

  Connection
  Something was wrong and we cannot connect you right now. Please try again later

  I tried multiple computers and browsers.  Same results.

  Don't know if this is the magic bullet, but I've just updated some information on my profile (add my first and last name) and now I can sign as if by magic in Family Safety. I had also been down since the end of July.

• Acer Liquid z220 HOME ACER stuck in the loop of the error, cannot use my menu

  Hello

  I bought an Acer Liquid Z220 two days ago and everything worked perfectly. Today, I watched my menu, and she advised me that "sorry, home Acer was arrested.'. I tried turning work, reset, reset the cached data, forcing the stoppage. I can't break out of this loop. I can still access everything through "Open recent", and through notifications, it is just the menu that I can't access. I tried to use the other menu browser offered with this phone, Quick Mode. But I'm honestly not interested in having my cell phone look like Win8 theme, that's why I chose host Acer in the first place.

  Any help would be appreciated, thanks in advance

  I hope that's not recurring, if so, is probably just a bug on Lollipop and Acer will repair it via OTA.

• for j in (select one, c (select 1 of the double),) loop... end loop;... error

  declare
  begin
   for cur in (select (select 1 from dual) col from dual)
   loop
    null;
   end loop;
  end;

  TOAD, OK, BUT in the wrong FORM!
  
  Published by: indoracle on February 23, 2012 02:38
  
  Published by: indoracle on February 23, 2012 02:40

  As you may or may not know, the PL/SQL engine forms is not the same as that of the database; Forms is generally a lower version than the database. As for your code block, please try this instead:

  BEGIN
    FOR cur in ( SELECT col1 FROM ( SELECT 1 AS col1 FROM dual) ) LOOP
      NULL;
    END LOOP;
  END;
  

  This form of the loop For cursor to compile in 10.1.2 Forms. The problem was that the Forms PL/SQL engine could not derive your view online column.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Updates Windows has been stuck in a loop and had error message update failed, when he restored it deleted my office 2013 at home and students.

  I have the Microsoft product identifier. How can I download it turn it on for my Lenovo thinkpad?

  Hello Tina,

  Thank you for the update.

  As you said that you run refresh and reset the computer this is the reason why the Microsoft Office application that you have installed has been removed after completing the refresh as the applications that came with your PC or you installed on Windows Store will be reinstalled automatically, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  After reset, all of your personal files will be deleted and your settings will be reset. All the apps the East came with your PC will be reinstalled, but other applications or programs will be removed.

  So, you will need to reinstall the office application and see if that helps.

  Hope this information helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Stop several parallel loops - error & stop button status

  I have several ongoing loops run in parallel and want to arrest all a loop based on the question whether one of the two conditions are met:

  • One of the loops has an error
  • You press a stop button

  Right now I do this using a master loop that checks to see if any of the loops have a mistake or if you press the stop button.

                                                   

  The problem I have is that I do the references between the loops using indicators of State T/F. These lights if it is the judgment of loops. This means that, at the end of a test, all the lights are on, and before the program is run again each light must be unchecked. It is not easy to use and my program grows I don't want to have to uncheck 20 bulbs before each test.

  

  Is there a way to make the lights reset at the beginning of each test, or is there a better way to refer to the status of each loop?

  An alternative is to use a notification utility.

  Implement a notifier with a Boolean data type.

  The stop of two loops of wire to the output of a waiting for Notification (remember to set a time-out).

  If an error occurs, or you press stop then send a notification.

  By clicking on Stop stop the two loops. Or a mistake in a loop will stop both.

  It's not more complicated I think a FG.

  

• Hard drive 4SNS HARD drive voltage error > SSD in iMac end 2012

  Hello - I replaced a HARD drive of 1 TB on an iMac 13.1, end of 2012 with a Samsung 850 500 GB SSD, closed and buttoned to the top of the machine without problem and started and attempt to restore backup time machine. This process completed 85% and then stalled. To restart, I'm stuck in a loop of the error. I ran diagnostic test and received the following code:

  4SNS/1/40000001:VH1R-0.000

  At first, I thought it was a missing thermocouple that many articles will guide you, but seems it's only on models 2011, not 2012 as in my case.

  I opened again and confirmed that the cables are well connected, represented diag and have the same error. Any other suggestions? The player would be bad?

  Thank you!

  Dan

  This error, as you already know, is for the hard drive voltage sensor. Replace the hard drive and EEA, what is happening. It looks like a bad SSD.

• Satellite P100-194: blue screen - nv4_disp is in an infinite loop

  I have a Satellite P100-194 since 28.08.06 and I get this blue screen telling me that the nv4_disp (I think it's the graphic driver nvidia) is in an infinite loop.

  Error message:
  ---------------------------------------------------------------------------------------

  (English translation):

  "Device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the incorrect programming hardware device driver.

  Please check with your hardware vendor, updates to the driver.

  Technical information:

  "STOP: 0x000000EA (0x857F66E0, 0x85CL22D0, 0xF7C61CB4, 0x00000001)".
  

  ---------------------------------------------------------------------------------------

  Then he said something about the execution of a physical memory dump and I had to reboot.
  Sometimes the monitor turns off just (without blue screen) and I have to stop again. Or the screen shows several vertical strips during startup. in the case of windows window should come it gets black. I had this error 5 - 6 times since I bought it.
  This could be a damage on the geforce 7900 gs card or RAM may be defective or do I have new chipset... drivers?

  The drivers are the latest (from toshiba).

  Technical support told me to format the pc.
  The laptop is new and was very expensive, so I find it very strange that I need to update anything to make it work properly... ? ! ?
  Yesterday I formatted the laptop and reinstalled with the Recovery CD... because the error is sometimes, I don't know if it's working now, but I would be grateful for any HELP or comment on that.

  Thank you.

  Monika

  Post edited by: [email protected]_DE

  Post edited by: [email protected]_DE

  Hello Monika

  Please try this http://support.microsoft.com/kb/293078/en-us

  It's very strange because I know Satellite P100 is very good laptop of sole and this question cannot be sorted as any kind of common problem. If nothing helps, please contact your local dealer. They will help you.

• Apple Configurator 2: Installation of the application blocks / loops over the placeholder of transfer

  I tried to set up a cart with Apple Configurator 2. I'm in iOS 9.2, iPad 2 Air and El Capitan. I tried to put in place following the blue print instructions, but that, as a dismal failure as this resulted in 16 of the 20 iPads being brick. So I was their implementation of a group of 20, first install a profile and installing apps. I tried to install my apps, but which have resulted in a loop and the errors that have no definition massively. So now I install apps in small groups of 3-5 applications. The problem that I am running is sporadic looped / hung when I install some applications. There seems to be no rhyme or reason. When I try to install the application on its own, the problem persists. It hangs at step "installation of placeholder. So far, this has happened with: Garage Band, Photo Collage and Socrative Teacher Edition. To solve the problem, I have to 'remove' the partially installed apps and then renounce install the specific application. Even if I try to install the application on its own, the problem persists. Any suggestions on how to fix this? I'm banging my head against the wall here. I'm on hour 25 + (not counting the nights where I hit a button, go home and come back on a random error).

  Thank you!

  I'm having the same exact problems, described to a T, I also try to update / prepare several wagons and Config 2 has recently been the total scourge of my work. I love the interface and think I have a solid understanding of how to use the program, but the process never ends. I thought whole point of the program was to be able to add/remove/update / manage iPads massively, but it seems to be able to get everything that fact I can only work with 2-3 iPads, both. Even so, I also have problems with remains of place holders or partially installed or removed applications. Please let me know if there is anything I can do to allow this program to run more smoothly.

• SATA: ERROR: giving up on the I/O transfer [0 x 35] 0

  Wrote the code to perform a very simple text on the same file over and over again write on a loop of 10 seconds approximately.  The code was written using all the tools of stock.  The above error msg would appear and continue to occur at each attempt to write.  The drive has been formatted by using the format datalight reliance system.  Chassis: SMU 1075, controller: SMU-8133.  Tried a new contoller and the hard drive with the same results.

  Reformatted the HD in FAT32 and the problem disappeared.

  The code opens and saves in the same file each time.  A run that same code on frame: PXI-1044, controller: PXI-8110 with reliance as fast as 1ms without any problem.

  The code is a while loop with write in text file with encoded text hard and hard-coded file location with wait 10 sec.  The code will run for several loops and the error happen to apparently randon times.

  I restarted the report this morning after tests were completed and the report came back different from the previous.  The report today is the FAT that is consistent with what we have formatted days ago.

• Compilation failed due to an error of Xilinx.

  I've recently updated since LV2014 until 2015, and an FPGA VI who previously compiled successfully is no longer made. My goal is a 7951R and I use a module e/s of 6584. A few minutes in the compilation process, I get the below error. I found the White Book of OR describing this problem for 2010 and provide a patch, but this solution has failed for me. Curiously, I can succeed in the compilation of FPGAS screws very simple, but not more complex that were previously viable.

  LabVIEW FPGA: Compilation failed due to an error of Xilinx.

  Details:
  ERROR: HDLCompiler:432 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd" line 55: Formal has no real or default value.
  INFO: HDLCompiler:1408 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\arrayLpIndx_593.vhd", line 22. array_in is declared here
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd", line 24: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\ODf62Gx_H0cwa34\NiFpgaAG_0000023b_ForLoop.vhd ignored errors
  -->

  Total memory use is 239156 kilobytes

  Number of errors: 2 (filtered 0)
  Number of warnings: 11 (filtered 0)
  Number of news: 0 (0 filtered)

  "Synthesize - XST" process failed

  Compile time
  ---------------------------
  Introduction date: 04/12/2015-16:36
  Date recovered results: 04/12/2015-16:38
  Waiting time in the queue: 00:09
  Compilation of time: 01:44
  -Generate a Xilinx IP: 00:00
  -Estimate of the resources - PlanAhead: 00:33
  -Summarize - XST: 00:56

  Okay, that was weird.

  I discovered there was a small change between revisions. I had wrong initalized a table by exchanging the entries, so that the size of the array is 0 instead of n. normally, this should be taken at the beginning of the compilation, but this table null was used to initialize a shift register in a while loop and the exit from the while loop enters a loop, where my FIFOs operate. While the loop/shift register seems to be the essential element to the compilation of progress as he did and present it as a mistake of Xilinx. If you delete the while loop then the error is detected quickly and correctly identified.

• Loop timed in LabVIEW DLL does not close

  Hello!  I have what I think, it is a simple loop timed in LabVIEW that stops after 100 iterations by throwing an error and letting the loop 'stop on error.  It works fine when it is executed in the ordinary LabVIEW environment, however, when compiled as a Dynamic Linked Library (DLL) and called from LabWindows it requires me to put an end to execution, rather than going out nicely.  As well, it seems to leave the real appeal of virtual Instrument very well and go to the next line of code, but when my function main() in LabWindows is completed it must always be something not cleaned which is the cause not come out well.  Any ideas?   I tried to add only a call to QuitLabVIEW and that doesn't seem to do it.

  Thanks in advance - hoping you will notice an error really easy. )

  A photo of the timed loop is attached.

  An excerpt from the code of LabWindows:

  int main)
  {
  CallMyLabVIEWDLL();  This line launches successfully and closed the window for my virtual instrument LabVIEW
  MessagePopup ("' My Title:", "That occurs after the call to your LabVIEW DLL" ");    This popup appears - indicating the call to the DLL has finished

  But after the code has completed LabWindows always shows "running", rather than close.

  return 0;
  }

  Why do you use a loop timed in the windows environment?  They are best used for real-time environments (not windows) and tend to have more support than the time.

  Is there a particular reason, a while loop will not work?

• Error handling in QMH projects with several sources of error

  Hi guys,.

  I have a head scratcher:

  QMH architecture, I have a state machine that describes a certain task of legislation on different instruments.

  Each of these instruments has its own message loop vi management and each of these loops could cause errors.

  I want to pass these errors to the state machine (VI main if you want) in order to take appropriate action or - at least - inform the user what the error instrument came. Currently, I use a global variable for each error source and merge errors in primary VI.

  Problem: Multiple errors, only the one connected to the first entry of the fusion VI errors is displayed.

  What is the best way to get errors from several sources to level superior screw and keep all the error information for debugging purposes?

  Thank you!